DePuy Synthes Variable Angle LCP Patella Plating System Study

April 10, 2023 updated by: Michael Miranda, Hartford Hospital

Utility of the Variable Angle LCP Patella Plating System for Traumatic Patellar Fractures: A Randomized Control Trial

The Depuy Synthes Locking Compression Plate (LCP) Variable Angle Patella Plating System is an FDA approved device. The purpose of this study is to see how well the Depuy Synthes LCP Variable Plating System work in fixing a broken kneecap (patella). Depuy says that the device will improve healing when compared to traditional ways of repairing a broken patella.

The goal of this randomized control trial is to learn how well the LCP Variable Plating System works to fix a broken patella (kneecap) compared to traditional fixation methods, in male and females, age 18 to 74, with a patellar fracture, and being treated at Hartford HealthCare The Bone and Joint Institute or Hartford Hospital. The main question it aims to answer are:

  • To understand if the Depuy Synthes LCP Variable Angle Plating System will provide a better way to help patients recover from a broken patella.

Participants will evaluated at specific time points: post-op day 1, 6 weeks, 3 months, 6 months, and 12 month post-surgery. Participants will be asked to:

  • Complete surveys at all evaluation timepoints.
  • Have x-rays(radiographs) taken at the 6 week, 3 month, 6 month, 9 month, and 1 year timepoints.
  • Participants will have a passive range of motion tests done at 6 week, 3 month, 6 month, 9 month, and 1 year timepoints.
  • Participants would have strength and balance tests done at the 3 month, 6 month, 9 month, and 1 year timepoints.

Study Overview

Study Type

Interventional

Enrollment (Anticipated)

36

Phase

  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Contact

Study Contact Backup

Study Locations

    • Connecticut
      • Hartford, Connecticut, United States, 06106
        • Hartford HealthCare The Bone and Joint Institute
        • Contact:
        • Contact:
        • Principal Investigator:
          • Michael Miranda, MD

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

  • Adult
  • Older Adult

Accepts Healthy Volunteers

No

Description

Inclusion Criteria:

  • Males and females
  • Age between 18 and 74 years old (inclusive)
  • Patellar fracture
  • Treated at Hartford HealthCare The Bone and Joint Institute or Hartford Hospital

Exclusion Criteria:

  • Age greater than or equal to 75 or less than 18
  • Patients that are non-ambulatory/limited ambulation prior to their injury
  • Previous patellar fracture
  • Pre-existing osteoarthritis of the knee
  • Ipsilateral femoral or tibia fractures

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Parallel Assignment
  • Masking: Single

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Experimental: Depuy Synthes LCP Patella Plating System
This group will have 18 randomly selected participants, who will receive the Depuy Synthes LCP Patella Plating System for patella fracture.
FDA approved device, 510K number of, K210408. The Variable Angle LCP Patella Plating System is a device that can be formed to a patients specific need with various anchoring points to best fix what is needed for fixation.
Other: Control/Conventional Fixation
This group will have 18 randomly selected participants, who will receive the conventional treatment for patella fracture.
Traditional fixation methods for patellar fracture (screws, suture fixation, wire fixation, other plates).

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
DePuy Synthes LCP Variable Angle Patella Plating System clinical outcomes comparison
Time Frame: 1 year
Comparing the DePuy Synthes LCP Variable Patella Plating System to tradition fixation methods using clinical outcomes measures.
1 year
DePuy Synthes LCP Variable Angle Patella Plating System functional outcomes comparison
Time Frame: 1 year
Comparing the DePuy Synthes LCP Variable Patella Plating System to traditional fixation methods using functional outcomes measures.
1 year
DePuy Synthes LCP Variable Angle Patella Plating System patient reported outcomes comparison
Time Frame: 1 year
Comparing the DePuy Synthes LCP Variable Angle Patella Plating System to traditional fixation methods using patient/participant reported outcomes measures.
1 year

Secondary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Patient-Reported Outcomes Measurement Information System 10 Global (PROMIS 10 Global)
Time Frame: Post-op day 1
PROMIS Global-10 is a validated 10-question survey used to assess health care-related quality of life measures such as a participant's function, mental health, numeric pain scale for the general population. The scale runs from 0 to 20. 0 represents severe impairment and low quality of life. A score of 20 represents the best possible quality of life.
Post-op day 1
Patient-Reported Outcomes Measurement Information System 10 Global (PROMIS 10 Global)
Time Frame: 6 weeks
PROMIS Global-10 is a validated 10-question survey used to assess health care-related quality of life measures such as a participant's function, mental health, numeric pain scale for the general population. The scale runs from 0 to 20. 0 represents severe impairment and low quality of life. A score of 20 represents the best possible quality of life.
6 weeks
Patient-Reported Outcomes Measurement Information System 10 Global (PROMIS 10 Global)
Time Frame: 3 months
PROMIS Global-10 is a validated 10-question survey used to assess health care-related quality of life measures such as a participant's function, mental health, numeric pain scale for the general population. The scale runs from 0 to 20. 0 represents severe impairment and low quality of life. A score of 20 represents the best possible quality of life.
3 months
Patient-Reported Outcomes Measurement Information System 10 Global (PROMIS 10 Global)
Time Frame: 6 months
PROMIS Global-10 is a validated 10-question survey used to assess health care-related quality of life measures such as a participant's function, mental health, numeric pain scale for the general population. The scale runs from 0 to 20. 0 represents severe impairment and low quality of life. A score of 20 represents the best possible quality of life.
6 months
Patient-Reported Outcomes Measurement Information System 10 Global (PROMIS 10 Global)
Time Frame: 9 months
PROMIS Global-10 is a validated 10-question survey used to assess health care-related quality of life measures such as a participant's function, mental health, numeric pain scale for the general population. The scale runs from 0 to 20. 0 represents severe impairment and low quality of life. A score of 20 represents the best possible quality of life.
9 months
Patient-Reported Outcomes Measurement Information System 10 Global (PROMIS 10 Global)
Time Frame: 1 year
PROMIS Global-10 is a validated 10-question survey used to assess health care-related quality of life measures such as a participant's function, mental health, numeric pain scale for the general population. The scale runs from 0 to 20. 0 represents severe impairment and low quality of life. A score of 20 represents the best possible quality of life.
1 year
Activities of Daily Living-Knee Outcomes Survey (ADL-KOS)
Time Frame: Post-op day 1
ADL-KOS is a 14 question survey that assesses a participant's functional ability related to their knee and how knee symptoms may affect their activities of daily living. The scoring for the ADL-KOS runs from 0 to 100. 0 representing the lowest possible functional ability, and 100 representing the maximum functional ability possible.
Post-op day 1
Activities of Daily Living-Knee Outcomes Survey (ADL-KOS)
Time Frame: 6 weeks
ADL-KOS is a 14 question survey that assesses a participant's functional ability related to their knee and how knee symptoms may affect their activities of daily living. The scoring for the ADL-KOS runs from 0 to 100. 0 representing the lowest possible functional ability, and 100 representing the maximum functional ability possible.
6 weeks
Activities of Daily Living-Knee Outcomes Survey (ADL-KOS)
Time Frame: 3 months
ADL-KOS is a 14 question survey that assesses a participant's functional ability related to their knee and how knee symptoms may affect their activities of daily living. The scoring for the ADL-KOS runs from 0 to 100. 0 representing the lowest possible functional ability, and 100 representing the maximum functional ability possible.
3 months
Activities of Daily Living-Knee Outcomes Survey (ADL-KOS)
Time Frame: 6 months
ADL-KOS is a 14 question survey that assesses a participant's functional ability related to their knee and how knee symptoms may affect their activities of daily living. The scoring for the ADL-KOS runs from 0 to 100. 0 representing the lowest possible functional ability, and 100 representing the maximum functional ability possible.
6 months
Activities of Daily Living-Knee Outcomes Survey (ADL-KOS)
Time Frame: 9 months
ADL-KOS is a 14 question survey that assesses a participant's functional ability related to their knee and how knee symptoms may affect their activities of daily living. The scoring for the ADL-KOS runs from 0 to 100. 0 representing the lowest possible functional ability, and 100 representing the maximum functional ability possible.
9 months
Activities of Daily Living-Knee Outcomes Survey (ADL-KOS)
Time Frame: 1 year
ADL-KOS is a 14 question survey that assesses a participant's functional ability related to their knee and how knee symptoms may affect their activities of daily living. The scoring for the ADL-KOS runs from 0 to 100. 0 representing the lowest possible functional ability, and 100 representing the maximum functional ability possible.
1 year
Radiographs
Time Frame: 6 weeks
Radiographic imaging will be taken at each of the study visits starting at week 6 to assess healing and ensure that there are no issues with the hardware. Radiographic healing will be assessed by the congruity of the cortical bone and reduction of fracture lines. Radiographs will also be used to determine if there is any failure of the hardware. (i.e. loosening of the screws or wires or instrument breakage).
6 weeks
Radiographs
Time Frame: 3 months
Radiographic imaging will be taken at each of the study visits starting at week 6 to assess healing and ensure that there are no issues with the hardware. Radiographic healing will be assessed by the congruity of the cortical bone and reduction of fracture lines. Radiographs will also be used to determine if there is any failure of the hardware. (i.e. loosening of the screws or wires or instrument breakage).
3 months
Radiographs
Time Frame: 6 months
Radiographic imaging will be taken at each of the study visits starting at week 6 to assess healing and ensure that there are no issues with the hardware. Radiographic healing will be assessed by the congruity of the cortical bone and reduction of fracture lines. Radiographs will also be used to determine if there is any failure of the hardware. (i.e. loosening of the screws or wires or instrument breakage).
6 months
Radiographs
Time Frame: 9 months
Radiographic imaging will be taken at each of the study visits starting at week 6 to assess healing and ensure that there are no issues with the hardware. Radiographic healing will be assessed by the congruity of the cortical bone and reduction of fracture lines. Radiographs will also be used to determine if there is any failure of the hardware. (i.e. loosening of the screws or wires or instrument breakage).
9 months
Radiographs
Time Frame: 1 year
Radiographic imaging will be taken at each of the study visits starting at week 6 to assess healing and ensure that there are no issues with the hardware. Radiographic healing will be assessed by the congruity of the cortical bone and reduction of fracture lines. Radiographs will also be used to determine if there is any failure of the hardware. (i.e. loosening of the screws or wires or instrument breakage).
1 year
Passive Range of Motion (ROM)
Time Frame: 6 weeks
Passive ROM will be assessed at each study visit starting at 6 weeks. Knee flexion and extension will be measured using a goniometer (an instrument that measures angles of joints). Participants will be asked to sit with their hips at 90° and lower leg hanging off the exam table or chair. The center of the goniometer will be placed at the rotational axis of the knee joint and the two arms of the goniometer will be aligned with the femoral shaft and tibial shaft. The participant's leg will then be maximally flexed and the goniometer read to determine the total flexion range, and then the participant's leg will be straightened to determine the maximum extension angle. The total knee arc of motion will be recorded as the addition of these two angles.
6 weeks
Passive Range of Motion (ROM)
Time Frame: 3 months
Passive ROM will be assessed at each study visit starting at 6 weeks. Knee flexion and extension will be measured using a goniometer (an instrument that measures angles of joints). Participants will be asked to sit with their hips at 90° and lower leg hanging off the exam table or chair. The center of the goniometer will be placed at the rotational axis of the knee joint and the two arms of the goniometer will be aligned with the femoral shaft and tibial shaft. The participant's leg will then be maximally flexed and the goniometer read to determine the total flexion range, and then the participant's leg will be straightened to determine the maximum extension angle. The total knee arc of motion will be recorded as the addition of these two angles.
3 months
Passive Range of Motion (ROM)
Time Frame: 6 months
Passive ROM will be assessed at each study visit starting at 6 weeks. Knee flexion and extension will be measured using a goniometer (an instrument that measures angles of joints). Participants will be asked to sit with their hips at 90° and lower leg hanging off the exam table or chair. The center of the goniometer will be placed at the rotational axis of the knee joint and the two arms of the goniometer will be aligned with the femoral shaft and tibial shaft. The participant's leg will then be maximally flexed and the goniometer read to determine the total flexion range, and then the participant's leg will be straightened to determine the maximum extension angle. The total knee arc of motion will be recorded as the addition of these two angles.
6 months
Passive Range of Motion (ROM)
Time Frame: 9 months
Passive ROM will be assessed at each study visit starting at 6 weeks. Knee flexion and extension will be measured using a goniometer (an instrument that measures angles of joints). Participants will be asked to sit with their hips at 90° and lower leg hanging off the exam table or chair. The center of the goniometer will be placed at the rotational axis of the knee joint and the two arms of the goniometer will be aligned with the femoral shaft and tibial shaft. The participant's leg will then be maximally flexed and the goniometer read to determine the total flexion range, and then the participant's leg will be straightened to determine the maximum extension angle. The total knee arc of motion will be recorded as the addition of these two angles.
9 months
Passive Range of Motion (ROM)
Time Frame: 1 year
Passive ROM will be assessed at each study visit starting at 6 weeks. Knee flexion and extension will be measured using a goniometer (an instrument that measures angles of joints). Participants will be asked to sit with their hips at 90° and lower leg hanging off the exam table or chair. The center of the goniometer will be placed at the rotational axis of the knee joint and the two arms of the goniometer will be aligned with the femoral shaft and tibial shaft. The participant's leg will then be maximally flexed and the goniometer read to determine the total flexion range, and then the participant's leg will be straightened to determine the maximum extension angle. The total knee arc of motion will be recorded as the addition of these two angles.
1 year
Strength
Time Frame: 3 months
Quadriceps muscle strength will be assessed starting at each visit starting at the 3 month post-operative visit. Strength measures will be assessed using a hand held dynamometer (a device that measures force). The strength assessment will be performed with the participant in a seated position with hips at 90°. The dynamometer will be placed mid tibial shaft and the testers other hand will be placed just above the knee to provide stability. The participant will be instructed to try to straighten their leg against the resistance of the examiner. The strength measures will be repeated 3 times for consistency. Additionally, the strength of the non-injured quadriceps will also be assessed to determine if there is a side to side strength deficit.
3 months
Strength
Time Frame: 6 months
Quadriceps muscle strength will be assessed starting at each visit starting at the 3 month post-operative visit. Strength measures will be assessed using a hand held dynamometer (a device that measures force). The strength assessment will be performed with the participant in a seated position with hips at 90°. The dynamometer will be placed mid tibial shaft and the testers other hand will be placed just above the knee to provide stability. The participant will be instructed to try to straighten their leg against the resistance of the examiner. The strength measures will be repeated 3 times for consistency. Additionally, the strength of the non-injured quadriceps will also be assessed to determine if there is a side to side strength deficit.
6 months
Strength
Time Frame: 9 months
Quadriceps muscle strength will be assessed starting at each visit starting at the 3 month post-operative visit. Strength measures will be assessed using a hand held dynamometer (a device that measures force). The strength assessment will be performed with the participant in a seated position with hips at 90°. The dynamometer will be placed mid tibial shaft and the testers other hand will be placed just above the knee to provide stability. The participant will be instructed to try to straighten their leg against the resistance of the examiner. The strength measures will be repeated 3 times for consistency. Additionally, the strength of the non-injured quadriceps will also be assessed to determine if there is a side to side strength deficit.
9 months
Strength
Time Frame: 1 year
Quadriceps muscle strength will be assessed starting at each visit starting at the 3 month post-operative visit. Strength measures will be assessed using a hand held dynamometer (a device that measures force). The strength assessment will be performed with the participant in a seated position with hips at 90°. The dynamometer will be placed mid tibial shaft and the testers other hand will be placed just above the knee to provide stability. The participant will be instructed to try to straighten their leg against the resistance of the examiner. The strength measures will be repeated 3 times for consistency. Additionally, the strength of the non-injured quadriceps will also be assessed to determine if there is a side to side strength deficit.
1 year
Balance
Time Frame: 3 months
Balance assessments will also take place at each visit starting at the 3 month post-operative visit. Static balance will be assessed using a portable force plate. Participants will be asked to perform four balance tasks. The first will be with both feet together hands on their hips staring straight ahead. The second assessment will be both feet together, hands on their hips with their eyes closed. The final two assessments will be single limb stances with eyes open. One single limb stance will be used to assess the operative limb the other the non-operative limb. Each balance task will be measured for 20 seconds. During this time investigator will record the medial lateral weight shift, anterior posterior weight shift, and sway area, a 90% elliptical fit of the weight shift with the minor and major axes defined as the maximum and minimum sway values in anterior/posterior and medial/lateral directions.
3 months
Balance
Time Frame: 6 months
Balance assessments will also take place at each visit starting at the 3 month post-operative visit. Static balance will be assessed using a portable force plate. Participants will be asked to perform four balance tasks. The first will be with both feet together hands on their hips staring straight ahead. The second assessment will be both feet together, hands on their hips with their eyes closed. The final two assessments will be single limb stances with eyes open. One single limb stance will be used to assess the operative limb the other the non-operative limb. Each balance task will be measured for 20 seconds. During this time investigator will record the medial lateral weight shift, anterior posterior weight shift, and sway area, a 90% elliptical fit of the weight shift with the minor and major axes defined as the maximum and minimum sway values in anterior/posterior and medial/lateral directions.
6 months
Balance
Time Frame: 9 months
Balance assessments will also take place at each visit starting at the 3 month post-operative visit. Static balance will be assessed using a portable force plate. Participants will be asked to perform four balance tasks. The first will be with both feet together hands on their hips staring straight ahead. The second assessment will be both feet together, hands on their hips with their eyes closed. The final two assessments will be single limb stances with eyes open. One single limb stance will be used to assess the operative limb the other the non-operative limb. Each balance task will be measured for 20 seconds. During this time investigator will record the medial lateral weight shift, anterior posterior weight shift, and sway area, a 90% elliptical fit of the weight shift with the minor and major axes defined as the maximum and minimum sway values in anterior/posterior and medial/lateral directions.
9 months
Balance
Time Frame: 1 year
Balance assessments will also take place at each visit starting at the 3 month post-operative visit. Static balance will be assessed using a portable force plate. Participants will be asked to perform four balance tasks. The first will be with both feet together hands on their hips staring straight ahead. The second assessment will be both feet together, hands on their hips with their eyes closed. The final two assessments will be single limb stances with eyes open. One single limb stance will be used to assess the operative limb the other the non-operative limb. Each balance task will be measured for 20 seconds. During this time investigator will record the medial lateral weight shift, anterior posterior weight shift, and sway area, a 90% elliptical fit of the weight shift with the minor and major axes defined as the maximum and minimum sway values in anterior/posterior and medial/lateral directions.
1 year

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Anticipated)

May 1, 2023

Primary Completion (Anticipated)

December 1, 2026

Study Completion (Anticipated)

December 1, 2027

Study Registration Dates

First Submitted

March 1, 2023

First Submitted That Met QC Criteria

April 10, 2023

First Posted (Actual)

April 21, 2023

Study Record Updates

Last Update Posted (Actual)

April 21, 2023

Last Update Submitted That Met QC Criteria

April 10, 2023

Last Verified

February 1, 2023

More Information

Terms related to this study

Additional Relevant MeSH Terms

Other Study ID Numbers

  • HHC-2022-0283

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

Yes

product manufactured in and exported from the U.S.

Yes

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Trauma

Clinical Trials on Variable Angle LCP Patella Plating System

Subscribe