SIMPLifying Elements of Standardized Automated Office Blood Pressure Measurements (Pilot Study) (SIMPLE-AOBP)

This study aims to assess whether removing single elements of the standardized office BP measurement procedure will affect the accuracy towards the mean awake ambulatory BP. Four arms are planned in a randomized order: 1) full standardized procedure, 2) standardized procedure but with cuff placed on a sleeve, 3) standardized procedure but arm resting vertically, 4) standardized procedure but with non-validated device.

This is a pilot study to inform on the sample size required to perform adequately powered large scale studies.

Study Overview

Status

Completed

Conditions

Detailed Description

Accurate and reliable blood pressure (BP) measurements are key for hypertension management. To this regard, all hypertension societies recommend using highly standardized automated oscillometric office BP measurements (AOBP) as a way to minimise measurement biases, enhance reproducibility and allow comparability. The standardized AOBP procedure emphasizes the need to measure BP in a controlled environment with optimal body positioning, the use of an appropriately sized cuff over a bare arm and a clinically validated oscillometric BP devices. It is also recommended to average >2 measurements at 30-60 seconds intervals after several minutes of seated rest alone in a quiet room. As such, important barriers exist to implement standardized AOBP in real-life settings, as this procedure requires time, space and patient mobility.

A 2017 meta-analysis evaluated the impact of several elements of oscillometric and auscultatory BP readings on systolic and diastolic BP levels. It showed that while most components of BP measurements appear to influence BP, the majority of included studies were of relatively low methodological quality (including unstandardized BP measurements, lack of randomisation, auscultatory method, absence or differences in rest periods, single readings, single cuff size) and almost none were compared with th gold-standard BP measurement, i.e average awake ambulatory BP measurements (ABPM). Since, two meta-analyses specifically assessing the effect of attendance during AOBP were published and showed conflicting results. While important components of AOBP (rest period and cuff size) were recently tested using a rigorous methodology, data is still missing for most elements.

Simplifying the AOBP procedure could result in improvements in acceptability and implementation. The need to perform this highly standardized procedure exerts pressure on patients, providers and administrative staff. Indeed, patients need to be properly seated alone in a quiet dedicated room in a chair with an arm rest that need to be adjustable to position the upper arm at heart level. This setup is seldom available apart in highly specialized hypertension clinics. Also, the arm must be bare, which can bring discomfort to patients with the requirement to remove their clothing or roll up the sleeves, which introduces another potential source of inaccuracy due to the tourniquet effect or the inability to completely uncover the upper arm. It can also introduce significant time delays in a clinical setting for less mobile patients. Furthermore, the BP device must be clinically validated for its accuracy. The lack of regulation and the ease of online purchase means many patients may be drawn to purchasing less expensive non-validated devices. While this problem may be more widespread in the home setting, not all office BP measuring devices are validated and recommended by Hypertension Canada.

The primary objective of the SIMPLE-AOBP study is to assess whether foregoing, or simplifying, specific elements of the AOBP procedure affects its accuracy towards the gold-standard mean awake ABPM. This study will employ a rigorous methodology (highly standardized measurements, identical settings and rest periods, randomization, blinded assessment of outcomes, averaged multiple BP measurements) to minimise measurement biases not related to the studies elements. The study will focus on three easily addressable elements: 1) the need the measure BP on a bare arm, 2) the requirement of supporting the arm at heart level and 3) the need to use a validated BP device. This trial will provide important pilot data to help design adequately powered large scale studies.

Study Type

Interventional

Enrollment (Actual)

30

Phase

  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

    • Quebec
      • Montréal, Quebec, Canada, H4J1C5
        • Hopital du Sacre-Coeur de Montreal

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

  • Adult
  • Older Adult

Accepts Healthy Volunteers

No

Description

Inclusion Criteria:

  • Adults ≥ 18 years old

Exclusion Criteria:

  • Upper arm size outside of cuff range of selected devices (<22 cm or >42 cm)
  • Permanent atrial fibrillation
  • Known severe aortic stenosis
  • Ongoing pregnancy
  • Inability or unwillingness to provide consent

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Diagnostic
  • Allocation: Randomized
  • Interventional Model: Crossover Assignment
  • Masking: Single

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Active Comparator: Standardized automated office BP measurements
BP measured using a highly standardized procedure using a validated office-grade device on a bare arm supported at heart level.
Results from all four arms will be compared to the mean awake ambulatory BP measured on the same arm and started immediately following completion of the testing protocol.
Active Comparator: Sleeved arm
BP measured using a highly standardized procedure using a validated office-grade device over a standardized sleeve with the arm supported at heart level.
Results from all four arms will be compared to the mean awake ambulatory BP measured on the same arm and started immediately following completion of the testing protocol.
Active Comparator: Arm not supported
BP measured using a highly standardized procedure using a validated office-grade device on a bare arm resting vertically.
Results from all four arms will be compared to the mean awake ambulatory BP measured on the same arm and started immediately following completion of the testing protocol.
Active Comparator: Non-validated device
BP measured using a highly standardized procedure using a non-validated home device on a bare arm supported at heart level.
Results from all four arms will be compared to the mean awake ambulatory BP measured on the same arm and started immediately following completion of the testing protocol.

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Difference with mean awake ambulatory systolic BP
Time Frame: at enrollment (time 0)
Difference between systolic BP measured in each study arm (average of 3 measurements) with the mean awake ambulatory systolic BP
at enrollment (time 0)

Secondary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Difference with mean awake ambulatory diastolic BP
Time Frame: at enrollment (time 0)
Difference between diastolic BP measured in each study arm (average of 3 measurements) with the mean awake ambulatory diastolic BP
at enrollment (time 0)

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

May 9, 2024

Primary Completion (Actual)

September 5, 2024

Study Completion (Actual)

September 5, 2024

Study Registration Dates

First Submitted

March 11, 2024

First Submitted That Met QC Criteria

March 15, 2024

First Posted (Actual)

March 19, 2024

Study Record Updates

Last Update Posted (Actual)

March 25, 2025

Last Update Submitted That Met QC Criteria

February 10, 2025

Last Verified

February 1, 2025

More Information

Terms related to this study

Other Study ID Numbers

  • SIMPLE-AOBP

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

NO

IPD Plan Description

Data will not be shared (pilot study)

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Blood Pressure

Clinical Trials on Mean awake ambulatory BP measurements

Subscribe