ポリメチルメタクリレート (PMMA) 膜を使用した骨誘導再生 (GBR) による骨再生の評価
カスタマイズされた 3D プリントされたポリメチルメタクリレート (PMMA) 膜を用いた誘導骨再生 (GBR) 後に水平欠損上顎審美領域で再生された骨の評価
To evaluate the quantity and quality of bone generated, radiographically and histomorphometrically, after guided bone regeneration (GBR) using a membrane of 3D printed custom made (PMMA) and subsequent stability of delayed implant placement.
調査の概要
状態
状態
条件
条件
介入・治療
介入・治療
詳細な説明
Guided bone regeneration (GBR), is the most widely used technique to facilitate bone generation. It depends on using a biocompatible membrane that acts as physical barrier preventing the connective tissue from invading the bone defect.
To achieve maximum bone regeneration, GBR membrane should have several characteristics, including:
- Biocompatibility.
- Proper stiffness for space maintenance.
- Prevent epithelial cell migration.
- Appropriate resorption time after proper bone regeneration. Membranes used in guided bone regeneration (GBR) may have some limitations as the need of second surgery for removal of the membrane (in case of non-resorbable membranes as titanium mesh or expanded polytetrafluoroethylene (e-PTFE) membranes), lake of space maintenance (as collagen membranes) in addition to their high cost.
Thus, we aim to use a commercially available material as polymethyl methacrylate (PMMA) with (GBR) to facilitate bone generation as well as subsequent implant placement.
Recent forms of (PMMA), have been certified to be biocompatible and safe for skin and mucosal contact. PMMA is characterized by having high toughness which may provide a space maintenance when using as membrane in guided bone regeneration (GBR). The PMMA prosthesis can be pre-fabricated, which results in reduction of surgical time, easy technical handling and good esthetic results.
In addition, it has a relatively low cost when it is compared to other types of membranes used in guided bone regeneration (GBR).
研究の種類
研究の種類
入学 (実際)
入学
段階
段階
- 適用できない
連絡先と場所
研究場所
-
-
Cairo Governorate
-
Cairo、Cairo Governorate、エジプト、11553
- Oral and Maxillofacial Surgery Department, Faculty of Dentistry, Cairo University
-
-
参加基準
適格基準
適格基準
就学可能な年齢
健康ボランティアの受け入れ
受講資格のある性別
説明
Inclusion Criteria:
- Patients with edentulous area related to horizontally deficient aesthetic zone of maxilla.
- Patients are physically healthy with no medical history of any systemic or local disease that would contraindicate ridge augmentation and/or implant surgery or complicate the healing process. (Severe liver or kidney disease, a history of head and neck radiotherapy, chemotherapy at the time of surgery, uncontrolled diabetes, active periodontal in the residual dentition, inflammatory or autoimmune disorders of the oral mucosa, poor oral hygiene, patient failure to cooperate, and any other disease condition contraindicating the oral surgery).
- Non-smokers.
- Free from temporomandibular joint disorders and abnormal oral habits such as bruxism.
- The edentulous ridges were covered with optimal thickness of keratinized mucosa with no signs of inflammation, ulceration or scar tissue.
- The occlusion shows sufficient inter-arch space for future prothesis.
Exclusion Criteria:
- General contraindications to surgery.
- Patients subjected to irradiation in the head and neck area less than 1 year before fixation.
- Untreated periodontitis.
- Poor oral hygiene.
- Uncontrolled diabetes.
- Pregnant or nursing.
- Substance abuse.
- Psychiatric problems or unrealistic expectations.
- Severe bruxism or clenching.
- Immunosuppressed or immunocompromised.
- Treated or under treatment with intravenous amino-bisphosphonates.
- Patients participating in other studies, if the present protocol could not be properly followed
研究計画
研究はどのように設計されていますか?
デザインの詳細
- 主な目的:処理
- 割り当て:なし
- 介入モデル:単一グループの割り当て
- マスキング:なし(オープンラベル)
アーム数
武器と介入
参加者グループ / アーム参加者グループ / アーム |
介入・治療介入・治療 |
|---|---|
|
他の:patient with horizontally deficient ridge in ethetic maxilary zone need (GBR) and implant placement
a group of patients with with horizontally deficient ridge in esthetic maxillary zone will undergo ridge augmentation with guided bone regeneration (GBR) technique using polymethylmethacrylate (PMMA) polymer as membrane. |
guided bone regeneration (GBR) using polymethylmethacrylate (PMMA) polymer as membrane.
他の名前:
|
この研究は何を測定していますか?
主要な結果の測定
主要な結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
amount of bone gain
時間枠:6 months postoperative
|
radiographic using cone beam computed tomography (CBCT) |
6 months postoperative
|
二次結果の測定
二次結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
quality of bone regenerated
時間枠:6 months after surgical procedure
|
bone core biopsy (histomorphometric analysis): Because the augmentation wasn't maintained in most cases, the resulting specimens varied too much to support a standardized quantitative histomorphometric protocol. Consequently, descriptive histopathology was performed instead. |
6 months after surgical procedure
|
その他の成果指標
その他の成果指標
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
post operative ridge width
時間枠:6 months postoperative
|
using bone caliper |
6 months postoperative
|
|
initial implant stability
時間枠:6 months post operative
|
using manual ratchet |
6 months post operative
|
協力者と研究者
捜査官
捜査官
- スタディディレクター:Hesham El Hawary、Professor of Oral and Maxillofacial surgery, Cairo university
出版物と役立つリンク
一般刊行物
- Elgali I, Omar O, Dahlin C, Thomsen P. Guided bone regeneration: materials and biological mechanisms revisited. Eur J Oral Sci. 2017 Oct;125(5):315-337. doi: 10.1111/eos.12364. Epub 2017 Aug 19.
- Freitas de Andrade P, Meza-Mauricio J, Kern R, Faveri M. Labial Repositioning Using Print Manufactured Polymethylmethacrylate- (PMMA-) Based Cement for Gummy Smile. Case Rep Dent. 2021 Dec 21;2021:7607522. doi: 10.1155/2021/7607522. eCollection 2021.
- Khojasteh A, Kheiri L, Motamedian SR, Khoshkam V. Guided Bone Regeneration for the Reconstruction of Alveolar Bone Defects. Ann Maxillofac Surg. 2017 Jul-Dec;7(2):263-277. doi: 10.4103/ams.ams_76_17.
- Benic GI, Hammerle CH. Horizontal bone augmentation by means of guided bone regeneration. Periodontol 2000. 2014 Oct;66(1):13-40. doi: 10.1111/prd.12039.
- Lee SW, Kim SG. Membranes for the Guided Bone Regeneration. Maxillofac Plast Reconstr Surg. 2014 Nov;36(6):239-46. doi: 10.14402/jkamprs.2014.36.6.239. Epub 2014 Nov 12.
- Fernandes da Silva AL, Borba AM, Simao NR, Pedro FL, Borges AH, Miloro M. Customized polymethyl methacrylate implants for the reconstruction of craniofacial osseous defects. Case Rep Surg. 2014;2014:358569. doi: 10.1155/2014/358569. Epub 2014 Jun 30.
- AlSubaie MF, Al-Sharydah AM, Nassim HM, Alhawsawi A. Orbital Floor Blowout Fracture Reconstruction Using Moldable Polymethyl Methacrylate: A Report of Two Cases and Their Imaging Findings. Open Access Emerg Med. 2022 May 25;14:223-232. doi: 10.2147/OAEM.S359173. eCollection 2022.
研究記録日
主要日程の研究
研究開始 (実際)
研究開始
一次修了 (実際)
一次修了
研究の完了 (実際)
研究の完了
試験登録日
最初に提出
最初に提出
QC基準を満たした最初の提出物
QC基準を満たした最初の提出物
最初の投稿 (実際)
最初の投稿
学習記録の更新
投稿された最後の更新 (実際)
投稿された最後の更新
QC基準を満たした最後の更新が送信されました
QC基準を満たした最後の更新が送信されました
最終確認日
最終確認日
詳しくは
本研究に関する用語
キーワード
その他の研究ID番号
その他の研究ID番号
- OMFS 3310
医薬品およびデバイス情報、研究文書
米国FDA規制医薬品の研究
米国FDA規制機器製品の研究
この情報は、Web サイト clinicaltrials.gov から変更なしで直接取得したものです。研究の詳細を変更、削除、または更新するリクエストがある場合は、register@clinicaltrials.gov。 までご連絡ください。 clinicaltrials.gov に変更が加えられるとすぐに、ウェブサイトでも自動的に更新されます。