Évaluation de l'os régénéré avec régénération osseuse guidée (GBR) à l'aide d'une membrane de polyméthylméthacrylate (PMMA)
Évaluation de l'os régénéré après régénération osseuse guidée (GBR) à l'aide d'une membrane personnalisée en polyméthylméthacrylate (PMMA) imprimée en 3D dans une zone esthétique maxillaire déficiente horizontalement
To evaluate the quantity and quality of bone generated, radiographically and histomorphometrically, after guided bone regeneration (GBR) using a membrane of 3D printed custom made (PMMA) and subsequent stability of delayed implant placement.
Aperçu de l'étude
Statut
Statut
Les conditions
Les conditions
Intervention / Traitement
Intervention / Traitement
Description détaillée
Guided bone regeneration (GBR), is the most widely used technique to facilitate bone generation. It depends on using a biocompatible membrane that acts as physical barrier preventing the connective tissue from invading the bone defect.
To achieve maximum bone regeneration, GBR membrane should have several characteristics, including:
- Biocompatibility.
- Proper stiffness for space maintenance.
- Prevent epithelial cell migration.
- Appropriate resorption time after proper bone regeneration. Membranes used in guided bone regeneration (GBR) may have some limitations as the need of second surgery for removal of the membrane (in case of non-resorbable membranes as titanium mesh or expanded polytetrafluoroethylene (e-PTFE) membranes), lake of space maintenance (as collagen membranes) in addition to their high cost.
Thus, we aim to use a commercially available material as polymethyl methacrylate (PMMA) with (GBR) to facilitate bone generation as well as subsequent implant placement.
Recent forms of (PMMA), have been certified to be biocompatible and safe for skin and mucosal contact. PMMA is characterized by having high toughness which may provide a space maintenance when using as membrane in guided bone regeneration (GBR). The PMMA prosthesis can be pre-fabricated, which results in reduction of surgical time, easy technical handling and good esthetic results.
In addition, it has a relatively low cost when it is compared to other types of membranes used in guided bone regeneration (GBR).
Type d'étude
Type d'étude
Inscription (Réel)
Inscription
Phase
Phase
- N'est pas applicable
Contacts et emplacements
Lieux d'étude
-
-
Cairo Governorate
-
Cairo, Cairo Governorate, Egypte, 11553
- Oral and Maxillofacial Surgery Department, Faculty of Dentistry, Cairo University
-
-
Critères de participation
Critère d'éligibilité
Critère d'éligibilité
Âges éligibles pour étudier
Accepte les volontaires sains
Sexes éligibles pour l'étude
La description
Inclusion Criteria:
- Patients with edentulous area related to horizontally deficient aesthetic zone of maxilla.
- Patients are physically healthy with no medical history of any systemic or local disease that would contraindicate ridge augmentation and/or implant surgery or complicate the healing process. (Severe liver or kidney disease, a history of head and neck radiotherapy, chemotherapy at the time of surgery, uncontrolled diabetes, active periodontal in the residual dentition, inflammatory or autoimmune disorders of the oral mucosa, poor oral hygiene, patient failure to cooperate, and any other disease condition contraindicating the oral surgery).
- Non-smokers.
- Free from temporomandibular joint disorders and abnormal oral habits such as bruxism.
- The edentulous ridges were covered with optimal thickness of keratinized mucosa with no signs of inflammation, ulceration or scar tissue.
- The occlusion shows sufficient inter-arch space for future prothesis.
Exclusion Criteria:
- General contraindications to surgery.
- Patients subjected to irradiation in the head and neck area less than 1 year before fixation.
- Untreated periodontitis.
- Poor oral hygiene.
- Uncontrolled diabetes.
- Pregnant or nursing.
- Substance abuse.
- Psychiatric problems or unrealistic expectations.
- Severe bruxism or clenching.
- Immunosuppressed or immunocompromised.
- Treated or under treatment with intravenous amino-bisphosphonates.
- Patients participating in other studies, if the present protocol could not be properly followed
Plan d'étude
Comment l'étude est-elle conçue ?
Détails de conception
- Objectif principal: Traitement
- Répartition: N / A
- Modèle interventionnel: Affectation à un seul groupe
- Masquage: Aucun (étiquette ouverte)
Nombre de bras
Armes et Interventions
Groupe de participants / BrasGroupe de participants / Bras |
Intervention / TraitementIntervention / Traitement |
|---|---|
|
Autre: patient with horizontally deficient ridge in ethetic maxilary zone need (GBR) and implant placement
a group of patients with with horizontally deficient ridge in esthetic maxillary zone will undergo ridge augmentation with guided bone regeneration (GBR) technique using polymethylmethacrylate (PMMA) polymer as membrane. |
guided bone regeneration (GBR) using polymethylmethacrylate (PMMA) polymer as membrane.
Autres noms:
|
Que mesure l'étude ?
Principaux critères de jugement
Principaux critères de jugement
Mesure des résultats |
Description de la mesure |
Délai |
|---|---|---|
|
amount of bone gain
Délai: 6 months postoperative
|
radiographic using cone beam computed tomography (CBCT) |
6 months postoperative
|
Mesures de résultats secondaires
Mesures de résultats secondaires
Mesure des résultats |
Description de la mesure |
Délai |
|---|---|---|
|
quality of bone regenerated
Délai: 6 months after surgical procedure
|
bone core biopsy (histomorphometric analysis): Because the augmentation wasn't maintained in most cases, the resulting specimens varied too much to support a standardized quantitative histomorphometric protocol. Consequently, descriptive histopathology was performed instead. |
6 months after surgical procedure
|
Autres mesures de résultats
Autres mesures de résultats
Mesure des résultats |
Description de la mesure |
Délai |
|---|---|---|
|
post operative ridge width
Délai: 6 months postoperative
|
using bone caliper |
6 months postoperative
|
|
initial implant stability
Délai: 6 months post operative
|
using manual ratchet |
6 months post operative
|
Collaborateurs et enquêteurs
Parrainer
Parrainer
Les enquêteurs
Les enquêteurs
- Directeur d'études: Hesham El Hawary, Professor of Oral and Maxillofacial surgery, Cairo university
Publications et liens utiles
Publications générales
- Elgali I, Omar O, Dahlin C, Thomsen P. Guided bone regeneration: materials and biological mechanisms revisited. Eur J Oral Sci. 2017 Oct;125(5):315-337. doi: 10.1111/eos.12364. Epub 2017 Aug 19.
- Freitas de Andrade P, Meza-Mauricio J, Kern R, Faveri M. Labial Repositioning Using Print Manufactured Polymethylmethacrylate- (PMMA-) Based Cement for Gummy Smile. Case Rep Dent. 2021 Dec 21;2021:7607522. doi: 10.1155/2021/7607522. eCollection 2021.
- Khojasteh A, Kheiri L, Motamedian SR, Khoshkam V. Guided Bone Regeneration for the Reconstruction of Alveolar Bone Defects. Ann Maxillofac Surg. 2017 Jul-Dec;7(2):263-277. doi: 10.4103/ams.ams_76_17.
- Benic GI, Hammerle CH. Horizontal bone augmentation by means of guided bone regeneration. Periodontol 2000. 2014 Oct;66(1):13-40. doi: 10.1111/prd.12039.
- Lee SW, Kim SG. Membranes for the Guided Bone Regeneration. Maxillofac Plast Reconstr Surg. 2014 Nov;36(6):239-46. doi: 10.14402/jkamprs.2014.36.6.239. Epub 2014 Nov 12.
- Fernandes da Silva AL, Borba AM, Simao NR, Pedro FL, Borges AH, Miloro M. Customized polymethyl methacrylate implants for the reconstruction of craniofacial osseous defects. Case Rep Surg. 2014;2014:358569. doi: 10.1155/2014/358569. Epub 2014 Jun 30.
- AlSubaie MF, Al-Sharydah AM, Nassim HM, Alhawsawi A. Orbital Floor Blowout Fracture Reconstruction Using Moldable Polymethyl Methacrylate: A Report of Two Cases and Their Imaging Findings. Open Access Emerg Med. 2022 May 25;14:223-232. doi: 10.2147/OAEM.S359173. eCollection 2022.
Dates d'enregistrement des études
Dates principales de l'étude
Début de l'étude (Réel)
Début de l'étude
Achèvement primaire (Réel)
Achèvement primaire
Achèvement de l'étude (Réel)
Achèvement de l'étude
Dates d'inscription aux études
Première soumission
Première soumission
Première soumission répondant aux critères de contrôle qualité
Première soumission répondant aux critères de contrôle qualité
Première publication (Réel)
Première publication
Mises à jour des dossiers d'étude
Dernière mise à jour publiée (Réel)
Dernière mise à jour publiée
Dernière mise à jour soumise répondant aux critères de contrôle qualité
Dernière mise à jour soumise répondant aux critères de contrôle qualité
Dernière vérification
Dernière vérification
Plus d'information
Termes liés à cette étude
Mots clés
Autres numéros d'identification d'étude
Autres numéros d'identification d'étude
- OMFS 3310
Informations sur les médicaments et les dispositifs, documents d'étude
Étudie un produit pharmaceutique réglementé par la FDA américaine
Étudie un produit d'appareil réglementé par la FDA américaine
Ces informations ont été extraites directement du site Web clinicaltrials.gov sans aucune modification. Si vous avez des demandes de modification, de suppression ou de mise à jour des détails de votre étude, veuillez contacter register@clinicaltrials.gov. Dès qu'un changement est mis en œuvre sur clinicaltrials.gov, il sera également mis à jour automatiquement sur notre site Web .