Utvärdering av benregenerering med guidad benregenerering (GBR) med hjälp av polymetylmetakrylat (PMMA) membran
Utvärdering av ben som regenererats efter guidad benregenerering (GBR) med hjälp av skräddarsydd 3D-tryckt polymetylmetakrylat (PMMA) membran i horisontellt bristfällig maxillär estetisk zon
To evaluate the quantity and quality of bone generated, radiographically and histomorphometrically, after guided bone regeneration (GBR) using a membrane of 3D printed custom made (PMMA) and subsequent stability of delayed implant placement.
Studieöversikt
Status
Status
Betingelser
Betingelser
Intervention / Behandling
Intervention / Behandling
Detaljerad beskrivning
Guided bone regeneration (GBR), is the most widely used technique to facilitate bone generation. It depends on using a biocompatible membrane that acts as physical barrier preventing the connective tissue from invading the bone defect.
To achieve maximum bone regeneration, GBR membrane should have several characteristics, including:
- Biocompatibility.
- Proper stiffness for space maintenance.
- Prevent epithelial cell migration.
- Appropriate resorption time after proper bone regeneration. Membranes used in guided bone regeneration (GBR) may have some limitations as the need of second surgery for removal of the membrane (in case of non-resorbable membranes as titanium mesh or expanded polytetrafluoroethylene (e-PTFE) membranes), lake of space maintenance (as collagen membranes) in addition to their high cost.
Thus, we aim to use a commercially available material as polymethyl methacrylate (PMMA) with (GBR) to facilitate bone generation as well as subsequent implant placement.
Recent forms of (PMMA), have been certified to be biocompatible and safe for skin and mucosal contact. PMMA is characterized by having high toughness which may provide a space maintenance when using as membrane in guided bone regeneration (GBR). The PMMA prosthesis can be pre-fabricated, which results in reduction of surgical time, easy technical handling and good esthetic results.
In addition, it has a relatively low cost when it is compared to other types of membranes used in guided bone regeneration (GBR).
Studietyp
Studietyp
Inskrivning (Faktisk)
Inskrivning
Fas
Fas
- Inte tillämpbar
Kontakter och platser
Studieorter
-
-
Cairo Governorate
-
Cairo, Cairo Governorate, Egypten, 11553
- Oral and Maxillofacial Surgery Department, Faculty of Dentistry, Cairo University
-
-
Deltagandekriterier
Urvalskriterier
Urvalskriterier
Åldrar som är berättigade till studier
Tar emot friska volontärer
Kön som är behöriga för studier
Beskrivning
Inclusion Criteria:
- Patients with edentulous area related to horizontally deficient aesthetic zone of maxilla.
- Patients are physically healthy with no medical history of any systemic or local disease that would contraindicate ridge augmentation and/or implant surgery or complicate the healing process. (Severe liver or kidney disease, a history of head and neck radiotherapy, chemotherapy at the time of surgery, uncontrolled diabetes, active periodontal in the residual dentition, inflammatory or autoimmune disorders of the oral mucosa, poor oral hygiene, patient failure to cooperate, and any other disease condition contraindicating the oral surgery).
- Non-smokers.
- Free from temporomandibular joint disorders and abnormal oral habits such as bruxism.
- The edentulous ridges were covered with optimal thickness of keratinized mucosa with no signs of inflammation, ulceration or scar tissue.
- The occlusion shows sufficient inter-arch space for future prothesis.
Exclusion Criteria:
- General contraindications to surgery.
- Patients subjected to irradiation in the head and neck area less than 1 year before fixation.
- Untreated periodontitis.
- Poor oral hygiene.
- Uncontrolled diabetes.
- Pregnant or nursing.
- Substance abuse.
- Psychiatric problems or unrealistic expectations.
- Severe bruxism or clenching.
- Immunosuppressed or immunocompromised.
- Treated or under treatment with intravenous amino-bisphosphonates.
- Patients participating in other studies, if the present protocol could not be properly followed
Studieplan
Hur är studien utformad?
Designdetaljer
- Primärt syfte: Behandling
- Tilldelning: N/A
- Interventionsmodell: Enskild gruppuppgift
- Maskning: Ingen (Open Label)
Antal vapen
Vapen och interventioner
Deltagargrupp / ArmDeltagargrupp / Arm |
Intervention / BehandlingIntervention / Behandling |
|---|---|
|
Övrig: patient with horizontally deficient ridge in ethetic maxilary zone need (GBR) and implant placement
a group of patients with with horizontally deficient ridge in esthetic maxillary zone will undergo ridge augmentation with guided bone regeneration (GBR) technique using polymethylmethacrylate (PMMA) polymer as membrane. |
guided bone regeneration (GBR) using polymethylmethacrylate (PMMA) polymer as membrane.
Andra namn:
|
Vad mäter studien?
Primära resultatmått
Primära resultatmått
Resultatmått |
Åtgärdsbeskrivning |
Tidsram |
|---|---|---|
|
amount of bone gain
Tidsram: 6 months postoperative
|
radiographic using cone beam computed tomography (CBCT) |
6 months postoperative
|
Sekundära resultatmått
Sekundära resultatmått
Resultatmått |
Åtgärdsbeskrivning |
Tidsram |
|---|---|---|
|
quality of bone regenerated
Tidsram: 6 months after surgical procedure
|
bone core biopsy (histomorphometric analysis): Because the augmentation wasn't maintained in most cases, the resulting specimens varied too much to support a standardized quantitative histomorphometric protocol. Consequently, descriptive histopathology was performed instead. |
6 months after surgical procedure
|
Andra resultatmått
Andra resultatmått
Resultatmått |
Åtgärdsbeskrivning |
Tidsram |
|---|---|---|
|
post operative ridge width
Tidsram: 6 months postoperative
|
using bone caliper |
6 months postoperative
|
|
initial implant stability
Tidsram: 6 months post operative
|
using manual ratchet |
6 months post operative
|
Samarbetspartners och utredare
Sponsor
Sponsor
Utredare
Utredare
- Studierektor: Hesham El Hawary, Professor of Oral and Maxillofacial surgery, Cairo university
Publikationer och användbara länkar
Allmänna publikationer
- Elgali I, Omar O, Dahlin C, Thomsen P. Guided bone regeneration: materials and biological mechanisms revisited. Eur J Oral Sci. 2017 Oct;125(5):315-337. doi: 10.1111/eos.12364. Epub 2017 Aug 19.
- Freitas de Andrade P, Meza-Mauricio J, Kern R, Faveri M. Labial Repositioning Using Print Manufactured Polymethylmethacrylate- (PMMA-) Based Cement for Gummy Smile. Case Rep Dent. 2021 Dec 21;2021:7607522. doi: 10.1155/2021/7607522. eCollection 2021.
- Khojasteh A, Kheiri L, Motamedian SR, Khoshkam V. Guided Bone Regeneration for the Reconstruction of Alveolar Bone Defects. Ann Maxillofac Surg. 2017 Jul-Dec;7(2):263-277. doi: 10.4103/ams.ams_76_17.
- Benic GI, Hammerle CH. Horizontal bone augmentation by means of guided bone regeneration. Periodontol 2000. 2014 Oct;66(1):13-40. doi: 10.1111/prd.12039.
- Lee SW, Kim SG. Membranes for the Guided Bone Regeneration. Maxillofac Plast Reconstr Surg. 2014 Nov;36(6):239-46. doi: 10.14402/jkamprs.2014.36.6.239. Epub 2014 Nov 12.
- Fernandes da Silva AL, Borba AM, Simao NR, Pedro FL, Borges AH, Miloro M. Customized polymethyl methacrylate implants for the reconstruction of craniofacial osseous defects. Case Rep Surg. 2014;2014:358569. doi: 10.1155/2014/358569. Epub 2014 Jun 30.
- AlSubaie MF, Al-Sharydah AM, Nassim HM, Alhawsawi A. Orbital Floor Blowout Fracture Reconstruction Using Moldable Polymethyl Methacrylate: A Report of Two Cases and Their Imaging Findings. Open Access Emerg Med. 2022 May 25;14:223-232. doi: 10.2147/OAEM.S359173. eCollection 2022.
Studieavstämningsdatum
Studera stora datum
Studiestart (Faktisk)
Studiestart
Primärt slutförande (Faktisk)
Primärt slutförande
Avslutad studie (Faktisk)
Avslutad studie
Studieregistreringsdatum
Först inskickad
Först inskickad
Först inskickad som uppfyllde QC-kriterierna
Först inskickad som uppfyllde QC-kriterierna
Första postat (Faktisk)
Första postat
Uppdateringar av studier
Senaste uppdatering publicerad (Faktisk)
Senaste uppdatering publicerad
Senaste inskickade uppdateringen som uppfyllde QC-kriterierna
Senaste inskickade uppdateringen som uppfyllde QC-kriterierna
Senast verifierad
Senast verifierad
Mer information
Termer relaterade till denna studie
Nyckelord
Andra studie-ID-nummer
Andra studie-ID-nummer
- OMFS 3310
Läkemedels- och apparatinformation, studiedokument
Studerar en amerikansk FDA-reglerad läkemedelsprodukt
Studerar en amerikansk FDA-reglerad produktprodukt
Denna information hämtades direkt från webbplatsen clinicaltrials.gov utan några ändringar. Om du har några önskemål om att ändra, ta bort eller uppdatera dina studieuppgifter, vänligen kontakta register@clinicaltrials.gov. Så snart en ändring har implementerats på clinicaltrials.gov, kommer denna att uppdateras automatiskt även på vår webbplats .