Bewertung der Knochenregeneration mit gesteuerter Knochenregeneration (GBR) unter Verwendung einer Polymethylmethacrylat (PMMA)-Membran
Bewertung der Knochenregeneration nach geführter Knochenregeneration (GBR) unter Verwendung einer maßgeschneiderten 3D-gedruckten Polymethylmethacrylat (PMMA)-Membran in der horizontal defizienten oberen ästhetischen Zone
To evaluate the quantity and quality of bone generated, radiographically and histomorphometrically, after guided bone regeneration (GBR) using a membrane of 3D printed custom made (PMMA) and subsequent stability of delayed implant placement.
Studienübersicht
Status
Status
Bedingungen
Bedingungen
Intervention / Behandlung
Intervention / Behandlung
Detaillierte Beschreibung
Guided bone regeneration (GBR), is the most widely used technique to facilitate bone generation. It depends on using a biocompatible membrane that acts as physical barrier preventing the connective tissue from invading the bone defect.
To achieve maximum bone regeneration, GBR membrane should have several characteristics, including:
- Biocompatibility.
- Proper stiffness for space maintenance.
- Prevent epithelial cell migration.
- Appropriate resorption time after proper bone regeneration. Membranes used in guided bone regeneration (GBR) may have some limitations as the need of second surgery for removal of the membrane (in case of non-resorbable membranes as titanium mesh or expanded polytetrafluoroethylene (e-PTFE) membranes), lake of space maintenance (as collagen membranes) in addition to their high cost.
Thus, we aim to use a commercially available material as polymethyl methacrylate (PMMA) with (GBR) to facilitate bone generation as well as subsequent implant placement.
Recent forms of (PMMA), have been certified to be biocompatible and safe for skin and mucosal contact. PMMA is characterized by having high toughness which may provide a space maintenance when using as membrane in guided bone regeneration (GBR). The PMMA prosthesis can be pre-fabricated, which results in reduction of surgical time, easy technical handling and good esthetic results.
In addition, it has a relatively low cost when it is compared to other types of membranes used in guided bone regeneration (GBR).
Studientyp
Studientyp
Einschreibung (Tatsächlich)
Einschreibung
Phase
Phase
- Unzutreffend
Kontakte und Standorte
Studienorte
-
-
Cairo Governorate
-
Cairo, Cairo Governorate, Ägypten, 11553
- Oral and Maxillofacial Surgery Department, Faculty of Dentistry, Cairo University
-
-
Teilnahmekriterien
Zulassungskriterien
Zulassungskriterien
Studienberechtigtes Alter
Akzeptiert gesunde Freiwillige
Studienberechtigte Geschlechter
Beschreibung
Inclusion Criteria:
- Patients with edentulous area related to horizontally deficient aesthetic zone of maxilla.
- Patients are physically healthy with no medical history of any systemic or local disease that would contraindicate ridge augmentation and/or implant surgery or complicate the healing process. (Severe liver or kidney disease, a history of head and neck radiotherapy, chemotherapy at the time of surgery, uncontrolled diabetes, active periodontal in the residual dentition, inflammatory or autoimmune disorders of the oral mucosa, poor oral hygiene, patient failure to cooperate, and any other disease condition contraindicating the oral surgery).
- Non-smokers.
- Free from temporomandibular joint disorders and abnormal oral habits such as bruxism.
- The edentulous ridges were covered with optimal thickness of keratinized mucosa with no signs of inflammation, ulceration or scar tissue.
- The occlusion shows sufficient inter-arch space for future prothesis.
Exclusion Criteria:
- General contraindications to surgery.
- Patients subjected to irradiation in the head and neck area less than 1 year before fixation.
- Untreated periodontitis.
- Poor oral hygiene.
- Uncontrolled diabetes.
- Pregnant or nursing.
- Substance abuse.
- Psychiatric problems or unrealistic expectations.
- Severe bruxism or clenching.
- Immunosuppressed or immunocompromised.
- Treated or under treatment with intravenous amino-bisphosphonates.
- Patients participating in other studies, if the present protocol could not be properly followed
Studienplan
Wie ist die Studie aufgebaut?
Designdetails
- Hauptzweck: Behandlung
- Zuteilung: N / A
- Interventionsmodell: Einzelgruppenzuweisung
- Maskierung: Keine (Offenes Etikett)
Anzahl der Arme
Waffen und Interventionen
Teilnehmergruppe / ArmTeilnehmergruppe / Arm |
Intervention / BehandlungIntervention / Behandlung |
|---|---|
|
Sonstiges: patient with horizontally deficient ridge in ethetic maxilary zone need (GBR) and implant placement
a group of patients with with horizontally deficient ridge in esthetic maxillary zone will undergo ridge augmentation with guided bone regeneration (GBR) technique using polymethylmethacrylate (PMMA) polymer as membrane. |
guided bone regeneration (GBR) using polymethylmethacrylate (PMMA) polymer as membrane.
Andere Namen:
|
Was misst die Studie?
Primäre Ergebnismessungen
Primäre Ergebnismessungen
Ergebnis Maßnahme |
Maßnahmenbeschreibung |
Zeitfenster |
|---|---|---|
|
amount of bone gain
Zeitfenster: 6 months postoperative
|
radiographic using cone beam computed tomography (CBCT) |
6 months postoperative
|
Sekundäre Ergebnismessungen
Sekundäre Ergebnismessungen
Ergebnis Maßnahme |
Maßnahmenbeschreibung |
Zeitfenster |
|---|---|---|
|
quality of bone regenerated
Zeitfenster: 6 months after surgical procedure
|
bone core biopsy (histomorphometric analysis): Because the augmentation wasn't maintained in most cases, the resulting specimens varied too much to support a standardized quantitative histomorphometric protocol. Consequently, descriptive histopathology was performed instead. |
6 months after surgical procedure
|
Andere Ergebnismessungen
Andere Ergebnismessungen
Ergebnis Maßnahme |
Maßnahmenbeschreibung |
Zeitfenster |
|---|---|---|
|
post operative ridge width
Zeitfenster: 6 months postoperative
|
using bone caliper |
6 months postoperative
|
|
initial implant stability
Zeitfenster: 6 months post operative
|
using manual ratchet |
6 months post operative
|
Mitarbeiter und Ermittler
Sponsor
Sponsor
Ermittler
Ermittler
- Studienleiter: Hesham El Hawary, Professor of Oral and Maxillofacial surgery, Cairo university
Publikationen und hilfreiche Links
Allgemeine Veröffentlichungen
- Elgali I, Omar O, Dahlin C, Thomsen P. Guided bone regeneration: materials and biological mechanisms revisited. Eur J Oral Sci. 2017 Oct;125(5):315-337. doi: 10.1111/eos.12364. Epub 2017 Aug 19.
- Freitas de Andrade P, Meza-Mauricio J, Kern R, Faveri M. Labial Repositioning Using Print Manufactured Polymethylmethacrylate- (PMMA-) Based Cement for Gummy Smile. Case Rep Dent. 2021 Dec 21;2021:7607522. doi: 10.1155/2021/7607522. eCollection 2021.
- Khojasteh A, Kheiri L, Motamedian SR, Khoshkam V. Guided Bone Regeneration for the Reconstruction of Alveolar Bone Defects. Ann Maxillofac Surg. 2017 Jul-Dec;7(2):263-277. doi: 10.4103/ams.ams_76_17.
- Benic GI, Hammerle CH. Horizontal bone augmentation by means of guided bone regeneration. Periodontol 2000. 2014 Oct;66(1):13-40. doi: 10.1111/prd.12039.
- Lee SW, Kim SG. Membranes for the Guided Bone Regeneration. Maxillofac Plast Reconstr Surg. 2014 Nov;36(6):239-46. doi: 10.14402/jkamprs.2014.36.6.239. Epub 2014 Nov 12.
- Fernandes da Silva AL, Borba AM, Simao NR, Pedro FL, Borges AH, Miloro M. Customized polymethyl methacrylate implants for the reconstruction of craniofacial osseous defects. Case Rep Surg. 2014;2014:358569. doi: 10.1155/2014/358569. Epub 2014 Jun 30.
- AlSubaie MF, Al-Sharydah AM, Nassim HM, Alhawsawi A. Orbital Floor Blowout Fracture Reconstruction Using Moldable Polymethyl Methacrylate: A Report of Two Cases and Their Imaging Findings. Open Access Emerg Med. 2022 May 25;14:223-232. doi: 10.2147/OAEM.S359173. eCollection 2022.
Studienaufzeichnungsdaten
Haupttermine studieren
Studienbeginn (Tatsächlich)
Studienbeginn
Primärer Abschluss (Tatsächlich)
Primärer Abschluss
Studienabschluss (Tatsächlich)
Studienabschluss
Studienanmeldedaten
Zuerst eingereicht
Zuerst eingereicht
Zuerst eingereicht, das die QC-Kriterien erfüllt hat
Zuerst eingereicht, das die QC-Kriterien erfüllt hat
Zuerst gepostet (Tatsächlich)
Zuerst gepostet
Studienaufzeichnungsaktualisierungen
Letztes Update gepostet (Tatsächlich)
Letztes Update gepostet
Letztes eingereichtes Update, das die QC-Kriterien erfüllt
Letztes eingereichtes Update, das die QC-Kriterien erfüllt
Zuletzt verifiziert
Zuletzt verifiziert
Mehr Informationen
Begriffe im Zusammenhang mit dieser Studie
Schlüsselwörter
Andere Studien-ID-Nummern
Andere Studien-ID-Nummern
- OMFS 3310
Arzneimittel- und Geräteinformationen, Studienunterlagen
Studiert ein von der US-amerikanischen FDA reguliertes Arzneimittelprodukt
Studiert ein von der US-amerikanischen FDA reguliertes Geräteprodukt
Diese Informationen wurden ohne Änderungen direkt von der Website clinicaltrials.gov abgerufen. Wenn Sie Ihre Studiendaten ändern, entfernen oder aktualisieren möchten, wenden Sie sich bitte an register@clinicaltrials.gov. Sobald eine Änderung auf clinicaltrials.gov implementiert wird, wird diese automatisch auch auf unserer Website aktualisiert .