Hodnocení kostní regenerace s řízenou kostní regenerací (GBR) s použitím polymetylmetakrylátové (PMMA) membrány
Hodnocení regenerace kosti po řízené regeneraci kosti (GBR) pomocí přizpůsobené 3D tištěné polymetylmetakrylátové (PMMA) membrány v horizontálně deficitní maxilární estetické zóně
To evaluate the quantity and quality of bone generated, radiographically and histomorphometrically, after guided bone regeneration (GBR) using a membrane of 3D printed custom made (PMMA) and subsequent stability of delayed implant placement.
Přehled studie
Postavení
Postavení
Podmínky
Podmínky
Intervence / Léčba
Intervence / Léčba
Detailní popis
Guided bone regeneration (GBR), is the most widely used technique to facilitate bone generation. It depends on using a biocompatible membrane that acts as physical barrier preventing the connective tissue from invading the bone defect.
To achieve maximum bone regeneration, GBR membrane should have several characteristics, including:
- Biocompatibility.
- Proper stiffness for space maintenance.
- Prevent epithelial cell migration.
- Appropriate resorption time after proper bone regeneration. Membranes used in guided bone regeneration (GBR) may have some limitations as the need of second surgery for removal of the membrane (in case of non-resorbable membranes as titanium mesh or expanded polytetrafluoroethylene (e-PTFE) membranes), lake of space maintenance (as collagen membranes) in addition to their high cost.
Thus, we aim to use a commercially available material as polymethyl methacrylate (PMMA) with (GBR) to facilitate bone generation as well as subsequent implant placement.
Recent forms of (PMMA), have been certified to be biocompatible and safe for skin and mucosal contact. PMMA is characterized by having high toughness which may provide a space maintenance when using as membrane in guided bone regeneration (GBR). The PMMA prosthesis can be pre-fabricated, which results in reduction of surgical time, easy technical handling and good esthetic results.
In addition, it has a relatively low cost when it is compared to other types of membranes used in guided bone regeneration (GBR).
Typ studie
Typ studie
Zápis (Aktuální)
Zápis
Fáze
Fáze
- Nelze použít
Kontakty a umístění
Studijní místa
-
-
Cairo Governorate
-
Cairo, Cairo Governorate, Egypt, 11553
- Oral and Maxillofacial Surgery Department, Faculty of Dentistry, Cairo University
-
-
Kritéria účasti
Kritéria způsobilosti
Kritéria způsobilosti
Věk způsobilý ke studiu
Přijímá zdravé dobrovolníky
Pohlaví způsobilá ke studiu
Popis
Inclusion Criteria:
- Patients with edentulous area related to horizontally deficient aesthetic zone of maxilla.
- Patients are physically healthy with no medical history of any systemic or local disease that would contraindicate ridge augmentation and/or implant surgery or complicate the healing process. (Severe liver or kidney disease, a history of head and neck radiotherapy, chemotherapy at the time of surgery, uncontrolled diabetes, active periodontal in the residual dentition, inflammatory or autoimmune disorders of the oral mucosa, poor oral hygiene, patient failure to cooperate, and any other disease condition contraindicating the oral surgery).
- Non-smokers.
- Free from temporomandibular joint disorders and abnormal oral habits such as bruxism.
- The edentulous ridges were covered with optimal thickness of keratinized mucosa with no signs of inflammation, ulceration or scar tissue.
- The occlusion shows sufficient inter-arch space for future prothesis.
Exclusion Criteria:
- General contraindications to surgery.
- Patients subjected to irradiation in the head and neck area less than 1 year before fixation.
- Untreated periodontitis.
- Poor oral hygiene.
- Uncontrolled diabetes.
- Pregnant or nursing.
- Substance abuse.
- Psychiatric problems or unrealistic expectations.
- Severe bruxism or clenching.
- Immunosuppressed or immunocompromised.
- Treated or under treatment with intravenous amino-bisphosphonates.
- Patients participating in other studies, if the present protocol could not be properly followed
Studijní plán
Jak je studie koncipována?
Detaily designu
- Primární účel: Léčba
- Přidělení: N/A
- Intervenční model: Přiřazení jedné skupiny
- Maskování: Žádné (otevřený štítek)
Počet zbraní
Zbraně a zásahy
Skupina účastníků / ArmSkupina účastníků / Arm |
Intervence / LéčbaIntervence / Léčba |
|---|---|
|
Jiný: patient with horizontally deficient ridge in ethetic maxilary zone need (GBR) and implant placement
a group of patients with with horizontally deficient ridge in esthetic maxillary zone will undergo ridge augmentation with guided bone regeneration (GBR) technique using polymethylmethacrylate (PMMA) polymer as membrane. |
guided bone regeneration (GBR) using polymethylmethacrylate (PMMA) polymer as membrane.
Ostatní jména:
|
Co je měření studie?
Primární výstupní opatření
Primární výstupní opatření
Měření výsledku |
Popis opatření |
Časové okno |
|---|---|---|
|
amount of bone gain
Časové okno: 6 months postoperative
|
radiographic using cone beam computed tomography (CBCT) |
6 months postoperative
|
Sekundární výstupní opatření
Sekundární výstupní opatření
Měření výsledku |
Popis opatření |
Časové okno |
|---|---|---|
|
quality of bone regenerated
Časové okno: 6 months after surgical procedure
|
bone core biopsy (histomorphometric analysis): Because the augmentation wasn't maintained in most cases, the resulting specimens varied too much to support a standardized quantitative histomorphometric protocol. Consequently, descriptive histopathology was performed instead. |
6 months after surgical procedure
|
Další výstupní opatření
Další výstupní opatření
Měření výsledku |
Popis opatření |
Časové okno |
|---|---|---|
|
post operative ridge width
Časové okno: 6 months postoperative
|
using bone caliper |
6 months postoperative
|
|
initial implant stability
Časové okno: 6 months post operative
|
using manual ratchet |
6 months post operative
|
Spolupracovníci a vyšetřovatelé
Sponzor
Sponzor
Vyšetřovatelé
Vyšetřovatelé
- Ředitel studie: Hesham El Hawary, Professor of Oral and Maxillofacial surgery, Cairo university
Publikace a užitečné odkazy
Obecné publikace
- Elgali I, Omar O, Dahlin C, Thomsen P. Guided bone regeneration: materials and biological mechanisms revisited. Eur J Oral Sci. 2017 Oct;125(5):315-337. doi: 10.1111/eos.12364. Epub 2017 Aug 19.
- Freitas de Andrade P, Meza-Mauricio J, Kern R, Faveri M. Labial Repositioning Using Print Manufactured Polymethylmethacrylate- (PMMA-) Based Cement for Gummy Smile. Case Rep Dent. 2021 Dec 21;2021:7607522. doi: 10.1155/2021/7607522. eCollection 2021.
- Khojasteh A, Kheiri L, Motamedian SR, Khoshkam V. Guided Bone Regeneration for the Reconstruction of Alveolar Bone Defects. Ann Maxillofac Surg. 2017 Jul-Dec;7(2):263-277. doi: 10.4103/ams.ams_76_17.
- Benic GI, Hammerle CH. Horizontal bone augmentation by means of guided bone regeneration. Periodontol 2000. 2014 Oct;66(1):13-40. doi: 10.1111/prd.12039.
- Lee SW, Kim SG. Membranes for the Guided Bone Regeneration. Maxillofac Plast Reconstr Surg. 2014 Nov;36(6):239-46. doi: 10.14402/jkamprs.2014.36.6.239. Epub 2014 Nov 12.
- Fernandes da Silva AL, Borba AM, Simao NR, Pedro FL, Borges AH, Miloro M. Customized polymethyl methacrylate implants for the reconstruction of craniofacial osseous defects. Case Rep Surg. 2014;2014:358569. doi: 10.1155/2014/358569. Epub 2014 Jun 30.
- AlSubaie MF, Al-Sharydah AM, Nassim HM, Alhawsawi A. Orbital Floor Blowout Fracture Reconstruction Using Moldable Polymethyl Methacrylate: A Report of Two Cases and Their Imaging Findings. Open Access Emerg Med. 2022 May 25;14:223-232. doi: 10.2147/OAEM.S359173. eCollection 2022.
Termíny studijních záznamů
Hlavní termíny studia
Začátek studia (Aktuální)
Začátek studia
Primární dokončení (Aktuální)
Primární dokončení
Dokončení studie (Aktuální)
Dokončení studie
Termíny zápisu do studia
První předloženo
První předloženo
První předloženo, které splnilo kritéria kontroly kvality
První předloženo, které splnilo kritéria kontroly kvality
První zveřejněno (Aktuální)
První zveřejněno
Aktualizace studijních záznamů
Poslední zveřejněná aktualizace (Aktuální)
Poslední zveřejněná aktualizace
Odeslaná poslední aktualizace, která splnila kritéria kontroly kvality
Odeslaná poslední aktualizace, která splnila kritéria kontroly kvality
Naposledy ověřeno
Naposledy ověřeno
Více informací
Termíny související s touto studií
Klíčová slova
Další identifikační čísla studie
Další identifikační čísla studie
- OMFS 3310
Informace o lécích a zařízeních, studijní dokumenty
Studuje lékový produkt regulovaný americkým FDA
Studuje produkt zařízení regulovaný americkým úřadem FDA
Tyto informace byly beze změn načteny přímo z webu clinicaltrials.gov. Máte-li jakékoli požadavky na změnu, odstranění nebo aktualizaci podrobností studie, kontaktujte prosím register@clinicaltrials.gov. Jakmile bude změna implementována na clinicaltrials.gov, bude automaticky aktualizována i na našem webu .