Enamel Remineralization Potential of Dentifrices in Situ

December 11, 2014 updated by: GlaxoSmithKline

Comparison of Enamel Remineralization Potential of Dentifrices Incorporating Different Fluoride Salts Using an in Situ Caries Model

This study will use an oral in-situ caries model to study remineralization of enamel due to the action of different combinations of fluoride salts delivered from dentifrices.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Completed

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Actual)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
83

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Phase 4

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

  • United States
    • Indiana
      • Indianapolis, Indiana, United States, 46202
        • Indiana University School of Dentistry

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

14 years to 76 years (Adult, Older Adult)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • Good general health with (in the opinion of the investigator) no clinically significant and relevant abnormalities of medical or oral health.
  • No current active caries or periodontal disease that may compromise the study or health of the subject.
  • All restorations in a good state of repair
  • Currently wearing a removable mandibular partial denture with sufficient room in the posterior buccal flange area to accomodate two enamel specimens required dimensions 12 x 7 mm.
  • Willing to have their denture modified to accomodate enamel test specimens
  • Willing and capable of wearing removable mandibular partial dentures 24 hours per day during the treatment periods.
  • Salivary flow rate in the range of normal values (unstimulated whole saliva flow rate greater than or equal to 0.2 mL/ minute; gum base stimulated whole saliva flow rate greater than or equal to 0.8 mL/minute.

Exclusion Criteria:

  • Individuals currently taking antibiotics, or who have taken antibiotics within 30 days prior to the first treatment visit.
  • Current active caries or periodontal disease that may compromise the study or health of the subject.

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Prevention
  • Allocation: Randomized
  • Interventional Model: Crossover Assignment
  • Masking: Double

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Experimental: Fluoride Toothpaste 1
Fluoride toothpaste containing sodium fluoride (NaF)
Drug: NaF
Fluoride toothpaste containing sodium fluoride as 1450 parts per million (ppm) F, 675 ppmF, 450 ppmF, 350ppmF.
Experimental: Fluoride Toothpaste 2
Fluoride toothpaste containing stannous fluoride (SnF) and NaF.
Drug: NaF
Fluoride toothpaste containing sodium fluoride as 1450 parts per million (ppm) F, 675 ppmF, 450 ppmF, 350ppmF.
Drug: SnF
Fluoride toothpaste containing stannous fluoride (1100 ppmF)
Experimental: Fluoride Toothpaste 3
Fluoride toothpaste containing sodium monofluorophosphate (NaMFP) and NaF.
Drug: NaF
Fluoride toothpaste containing sodium fluoride as 1450 parts per million (ppm) F, 675 ppmF, 450 ppmF, 350ppmF.
Drug: NaMFP
Fluoride toothpaste containing sodium monofluorophosphate (1000 ppmF)
Active Comparator: Reference Dentifrice
Low fluoride toothpaste containing NaF
Drug: NaF
Fluoride toothpaste containing sodium fluoride as 1450 parts per million (ppm) F, 675 ppmF, 450 ppmF, 350ppmF.

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Percentage Surface Microhardness Recovery (%SMHR) of Enamel Specimens Exposed to NaF Toothpaste (1450ppmF) and SnF/NaF Toothpaste (1450ppmF)
Time Frame: Baseline to 14 days
SMH test was used to assess mineral status of partially demineralized enamel specimens using Wilson 2100 Hardness tester. SMH was determined by measuring the length of the indentations of enamel specimens. An increase in the indentation length compared to the baseline indicates softening/demineralization, while decrease in the indentation represents rehardening/ remineralization of enamel surface. Percent SMH recovery was calculated from indentation values of enamel specimens at baseline(B), after intra-oral exposure(R) and after in-vitro demineralization(D) using formula: [(D-R)/(D-B)]*100.
Baseline to 14 days

Secondary Outcome Measures

Secondary Outcome Measures

In a clinical study's protocol, a planned outcome measure that is not as important as the primary outcome measure for evaluating the effect of an intervention but is still of interest. Most clinical studies have more than one secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
%SMHR of Enamel Specimens Exposed to NaF Toothpaste (1450ppmF), SnF/NaF Toothpaste (1450ppmF), NaMFP/NaF Toothpaste (1450ppmF) and NaF Toothpaste (675ppmF)
Time Frame: Baseline to 14 days
SMH test was used to assess mineral status of partially demineralized enamel specimens using Wilson 2100 Hardness tester. SMH was determined by measuring the length of the indentations of enamel specimens. An increase in the indentation length compared to the baseline indicates softening/demineralization, while decrease in the indentation represents rehardening/ remineralization of enamel surface. Percent SMH recovery was calculated from indentation values of enamel specimens at baseline(B), after intra-oral exposure(R) and after in-vitro demineralization(D) using formula: [(D-R)/ (D-B)]*100.
Baseline to 14 days
Change From Baseline in Enamel Fluoride Uptake Upon Exposure to NaF Toothpaste (1450ppmF), SnF/NaF Toothpaste (1450ppmF), NaMFP/NaF Toothpaste (1450ppmF) and NaF Toothpaste (675ppmF)
Time Frame: Baseline to 14 days
Enamel fluoride uptake was determined using the microdrill enamel biopsy technique. The amount of fluoride uptake by enamel was calculated based on the amount of fluoride (F) divided by the area of the enamel cores. The difference between treatments was calculated with respect to fluoride uptake by enamel.
Baseline to 14 days

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
GlaxoSmithKline

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
November 1, 2009

Primary Completion (Actual)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
March 1, 2010

Study Completion (Actual)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
March 1, 2010

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
May 20, 2010

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
May 21, 2010

First Posted (Estimate)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
May 24, 2010

Study Record Updates

Last Update Posted (Estimate)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
January 1, 2015

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
December 11, 2014

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
December 1, 2014

More Information

Terms related to this study

Keywords

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • T3500690

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings