The Analysis and Applications of Dynamic Impression Insole

June 24, 2012 updated by: Taipei Veterans General Hospital, Taiwan

The Effect of Dynamic Impression Insoles on Plantar Pressure and Pain in Persons With Metatarsal Pain

The aim of the study was to investigate the effectiveness of dynamic impression insoles on plantar pressure and pain reduction. A dynamic impression insole was made by sequential padding with Plastazote and P-cell under daily walking compression. The pain levels and plantar pressure with the use of dynamic impression insole were assessed and compared with 7-mm Ethylene Vinyl Acetate (EVA) control, 9-mm uncompressed Plastazote and custom molded insoles. Plantar pressure was measured by a Pedar-X mobile system, and pain level was assessed using a Visual Analog Scales.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Completed

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

Toe deformities may cause prominence of the metatarsal heads (MTH) and distal displacement of fat-pad cushion beneath the MTH, resulting in the metatarsal pain. Foot pain frequently leads to limitation of activities of daily life and deterioration of life quality. Foot orthoses have been commonly used in clinical practice to reduce plantar pressure and subsequent pain. However, the therapeutic efficacies of custom molded insoles with a metatarsal support vary widely with their designs and materials. We designed a simple and effective method that a dynamic impression insole was made by sequential padding of foams with different compressibility under successive dynamic impression in daily walking. A piece of metatarsal pad and arch support made of EVA was attached to the bottom of impressed insole just proximal to the first, second, and third MTH according to the foot impression. Fifty participants with metatarsal pain were recruited from the podiatry outpatient clinic of Taipei Veteran General Hospital. The plantar pressure measurements were carried out under a comfortable and stable walking speed preferred by the participants one month after the dynamic impression and custom molded insoles were well fabricated. All pressure data were processed with the Novel-Win Multimask analysis software. The purposes of this study were to investigate the biomechanics of dynamic impression insole in plantar pressure and pain reduction.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Actual)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
50

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Early Phase 1

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

  • Taiwan
      • Taipei City, Taiwan
        • Taipei VGH

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

18 years to 90 years (Adult, Older Adult)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • Adults with metatarsal pain
  • Active in walking without any walking aids

Exclusion Criteria:

  • People with flexible flat foot
  • Any acute inflammation

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Supportive Care
  • Allocation: Non-Randomized
  • Interventional Model: Factorial Assignment
  • Masking: None (Open Label)

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Experimental: Dynamic impression insole
We sequentially padded P-cell, Ethylene Vinyl Acetate, and Multiform on the 9-mm thick plastazote under daily walking compression to make dynamic impression insole.
Procedure: Dynamic impression insole
We sequentially padded (1)a 6.5-mm thick P-cell (21 Shore A hardness, Acor orthopedic Inc. Cleveland, Ohio, USA), and (2)a piece of metatarsal pad and arch support made of Ethylene Vinyl Acetate (EVA) (40 Shore A hardness, Schein orthopadie service KG. Remscheid, Germany) to the bottom of the impressed 9-mm thick plastazote (15 Shore A hardness, Schein orthopadie service KG. Remscheid, Germany) with double-sided adhesive tape in the forefoot region and just proximal to the first, second, and third metatarsal head region. We additionally padded a 2-mm thick Multiform (30 Shore A hardness, Schein orthopadie service KG. Remscheid, Germany) on the top of the impressed insole with double-sided adhesive tape.
Experimental: Custom molded insole
The custom molded insole was made by sequentially padded Multiform, P-cell, EVA, and cork on the positive plaster cast impressed by an impression box while holding the subtalar joint at a neutral position.
Procedure: Custom molded insole
The custom molded insole was made by sequentially padded Multiform (30 Shore A hardness, Schein orthopadie service KG. Remscheid, Germany), P-cell (21 Shore A hardness, Acor orthopedic Inc. Cleveland, Ohio, USA), Ethylene Vinyl Acetate (EVA)(40 Shore A hardness, Schein orthopadie service KG. Remscheid, Germany), and cork (50 Shore A hardness, Schein orthopadie service KG. Remscheid, Germany) on the positive plaster cast impressed by an impression box while holding the subtalar joint at a neutral position.
Experimental: 9-mm uncompressed Plastazote insole
We used 9-mm flat Plastazote as an insole
Procedure: 9-mm uncompressed Plastazote
We used 9-mm flat Plastazote(15 Shore A hardness, Schein orthopadie service KG. Remscheid, Germany) as an insole
Experimental: 7-mm Ethylene Vinyl Acetate (EVA)
We used 7-mm flat Ethylene Vinyl Acetate (EVA) as an insole
Procedure: 7-mm Ethylene Vinyl Acetate (EVA)
We used 7-mm flat Ethylene Vinyl Acetate (EVA) (40 Shore A hardness, Schein orthopadie service KG. Remscheid, Germany) as an insole

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Change from baseline in peak plantar pressure value with different insoles
Time Frame: 4 weeks
We measure peak pressure (in unit of kPa) under forefoot, midfoot, and rearfoot when using different kinds of insoles by Pedar-X mobile in-shoe system (Novel gmbh, Munich, Germany), and data were processed with the Novel-Win Multimask analysis software (Novel gmbh, Munich, Germany) after using dynamic impression insole for four weeks.
4 weeks

Secondary Outcome Measures

Secondary Outcome Measures

In a clinical study's protocol, a planned outcome measure that is not as important as the primary outcome measure for evaluating the effect of an intervention but is still of interest. Most clinical studies have more than one secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
Change from baseline in pain levels using Visual Analog Scales
Time Frame: 4 weeks
We measure pain levels when using different kinds of insoles by Visual Analog Scales after using dynamic impression insole for four weeks.
4 weeks

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Taipei Veterans General Hospital, Taiwan

Investigators

Investigators

A researcher involved in a clinical study. Related terms include site principal investigator, site sub-investigator, study chair, study director, and study principal investigator.
  • Study Director: Chang Bao-Chi, Taipei Veterans General Hospital, Taiwan

Publications and helpful links

The person responsible for entering information about the study voluntarily provides these publications. These may be about anything related to the study.

General Publications

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
April 1, 2011

Primary Completion (Actual)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
June 1, 2012

Study Completion (Actual)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
June 1, 2012

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
October 19, 2011

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
June 24, 2012

First Posted (Estimate)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
June 27, 2012

Study Record Updates

Last Update Posted (Estimate)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
June 27, 2012

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
June 24, 2012

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
June 1, 2012

More Information

Terms related to this study

Keywords

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • 97-11-12A

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings