SpO2 Accuracy of Noninvasive Pulse Oximeter Sensor With Motion Conditions

May 19, 2025 updated by: Stryker Sustainability Solutions

Post-Launch Hypoxia Clinical Study Protocol for Reprocessed Masimo RD SET Pulse Oximeters With Motion

The purpose of this clinical study is to validate the SpO2 accuracy of the Stryker Sustainability Solutions pulse oximetry sensors during motion conditions over the range of 70 -100% SaO2 as compared to arterial blood samples assessed by CO-Oximetry during conditions in which the subject is moving. The end goal is to provide supporting documentation for the SpO2 accuracy validation of the reprocessed sensors with motion indications.

Study Overview

Status

Completed

Conditions

Detailed Description

In this study, the level of oxygen within the blood will be reduced in a controlled manner by reducing the concentration of oxygen the study volunteer breathes. The accuracy of a noninvasive pulse oximeter sensor will be assessed by comparison to the oxygen saturation measurements from a laboratory blood gas analyzer.

A machine will be used to induce motions of 20 mm during testing at a sine rate of 2Hz, 3Hz, and 4Hz. A third motion moves the arm a random distance of 0 to 30mm at a random speed up to 5Hz.

It is required that the Accuracy Root Mean Square (ARMS) performance of the Stryker pulse oximetry sensors will meet a specification of +/-3% with a target of +/-3% or better in motion conditions for the range of 70 - 100% SaO2 (typically, saturation is determined once with air breathing and then at three or six levels, e.g. 94%, 90%, 85%, 80%, 75% and 70% or 95%, 85% and 75% saturation for about 30-60 seconds or 60-90 seconds at each level), thereby demonstrating an acceptable SpO2 accuracy performance specification. This study should utilize a three level structure (95%, 85% and 75%).

Study Type

Interventional

Enrollment (Actual)

11

Phase

  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

    • California
      • San Francisco, California, United States, 94133
        • UCSF Hypoxia Research Laboratory

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

  • Adult

Accepts Healthy Volunteers

Yes

Description

Inclusion Criteria:

  • The subject is male or female, aged ≥18 and <50
  • The subject is in good general health with no evidence of any medical problems.
  • The subject is fluent in both written and spoken English
  • The subject has provided informed consent and is willing to comply with the study procedures

Exclusion Criteria:

The subject is obese (BMI>30)

  • The subject has a known history of heart disease, lung disease, kidney or liver disease
  • Diagnosis of asthma, sleep apnea, or use of CPAP
  • Subject has diabetes
  • Subject has a clotting disorder
  • The subject a hemoglobinopathy or history of anemia, per subject report or the first blood sample, that in the opinion of the investigator, would make them unsuitable for study participation
  • The subject has any other serious systemic illness
  • The subject is a current smoker
  • Any injury, deformity, or abnormality at the sensor sites that in the opinion of the investigators would interfere with the sensors working correctly
  • The subject has a history of fainting or vasovagal response
  • The subject has a history of sensitivity to local anesthesia
  • The subject has a diagnosis of Raynaud's disease
  • The subject has unacceptable collateral circulation based on exam by the investigator (Allen's test)
  • The subject is pregnant, lactating or trying to get pregnant
  • The subject is unable or unwilling to provide informed consent, or is unable or unwilling to comply with study procedures
  • The subject has any other condition, which in the opinion of the investigators would make them unsuitable for the study

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Other
  • Allocation: N/A
  • Interventional Model: Single Group Assignment
  • Masking: None (Open Label)

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Experimental: Experimental Arms
Experimental: Healthy adult participants All participants are enrolled in the test group and receive the noninvasive adhesive reprocessed pulse oximeter sensors
Masimo RD SET SpO2 Adhesive Sensors, Adult (4000 Adt), Adult & Neonate (4003 Neo)

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Accuracy of Sensor by Comparing SpO2 Percent Blood Oxygen Saturation to SaO2 Percent Blood Oxygen Saturation Utilizing Arms Calculation Calculation [Time Frame: 1 - 5 Hours]
Time Frame: 1 - 5 hours
The outcome of this study is the accuracy of the SpO2 (percent oxygen saturation by pulse oximetry) measured by the Reprocessed Oximeter pulse oximetry sensors during motion conditions over the range of 70 - 100% saturation compared to SaO2 (percent oxygen saturation by co-oximetry from blood samples) from arterial blood samples. The accuracy is calculated using the Arms error between measured SpO2 and reference SaO2. The Arms must meet the 3% specification for each reprocessed pulse oximetry sensor style. Standard deviation of the differences is computed as the precision. Square root of the sum of the squares of bias and precision is computed as the Arms Error value.
1 - 5 hours

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Investigators

  • Principal Investigator: Philip Bickler, MD, PhD, UCSF Hypoxia Research Laboratory

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

May 27, 2023

Primary Completion (Actual)

May 28, 2023

Study Completion (Actual)

May 28, 2023

Study Registration Dates

First Submitted

November 20, 2023

First Submitted That Met QC Criteria

November 28, 2023

First Posted (Actual)

November 29, 2023

Study Record Updates

Last Update Posted (Actual)

June 6, 2025

Last Update Submitted That Met QC Criteria

May 19, 2025

Last Verified

May 1, 2025

More Information

Terms related to this study

Additional Relevant MeSH Terms

Other Study ID Numbers

  • CRD10351

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

NO

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

Yes

product manufactured in and exported from the U.S.

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Healthy

Clinical Trials on Experimental Masimo RD SET SpO2 Adhesive Sensors

Subscribe