- ICH GCP
- 미국 임상 시험 레지스트리
- 임상시험 NCT02995876
The Clinical Performance of Inlay Zirconia Bridges
The Clinical Performance of Inlay Zirconia Bridges Using Three Different Designs
When missing tooth structure or teeth are replaced, minimal biologic risk should be involved to re-establish function and esthetics. The increased use of the adhesive technique and preservation of dental tissues have greatly impacted conservative tooth preparation design. The development use of zirconia technology and all-ceramic systems has opened the potential for fabrication inlays zirconia bridges with durability and good aesthetics.
The purpose of this study is to clinically evaluate the placement of inlay bridge made of a Y-TZP framework veneered with a pressed ceramic and bonded with a completely adhesive approach in the replacement of a single missing tooth.
연구 개요
상세 설명
This study evaluates the use of inlay bridge made of Zirconia and all ceramic systems with three designs in the replacement process of one single tooth (i.e. a missing premolar or molar.) The first design is going to be fabricated with CAD/CAM Zirconia and the occlusal surface from e-max press.
The second design is going to be fabricated with CAD/CAM Zirconia and the occlusal surface from e-max press and the internal surface coated with glaze layer to improve the adhesion.
The third design is going to be fabricated with CAD/CAM Zirconia and the occlusal surface from e-max press and the internal surface coated with a layer of e-max ceramic press to improve the adhesion.
연구 유형
등록 (실제)
단계
- 해당 없음
연락처 및 위치
연구 장소
-
-
-
Damascus, 시리아 아랍 공화국, DM20AM18
- Department of Fixed Prosthodontics, University of Damascus Dental School, Damascus, Syria
-
-
참여기준
자격 기준
공부할 수 있는 나이
건강한 자원 봉사자를 받아들입니다
연구 대상 성별
설명
Inclusion Criteria:
- Good oral hygiene
- Low susceptibility to caries
- Parallel alignment of abutment teeth
- Immobility of the abutment teeth
- Minimum height of abutment teeth ≥ 5 mm (connector thickness)
- Maximum mesio-distal extension of the inter-dental gap of 9 mm (width of premolar) or 12 mm (width of molar)
Exclusion Criteria:
- Severe para-functional habits.
- Short clinical crowns (<5 mm)
- Extensive defects of the clinical crown,
- Loosening of teeth because of factors related to the periodontal tissues.
공부 계획
연구는 어떻게 설계됩니까?
디자인 세부사항
- 주 목적: 치료
- 할당: 무작위
- 중재 모델: 병렬 할당
- 마스킹: 삼루타
무기와 개입
참가자 그룹 / 팔 |
개입 / 치료 |
---|---|
간섭 없음: Zirconia and E-max Press
The first design is going to be fabricated with CAD/CAM Zirconia and the occlusal surface from E-max Press.
|
|
실험적: Zirconia and E-max Press and Glaze
The second design is going to be fabricated with CAD/CAM Zirconia and the occlusal surface from E-max Press and the internal surface coated with a glaze layer to improve adhesion.
|
A coating of a glaze layer will be used at the inner surface of the bridge to improve adhesion
|
실험적: Zirconia and E-max Press twice
The third design is going to be fabricated with CAD/CAM Zirconia and the occlusal surface from E-max Press and the internal surface coated with an E-max Press layer to improve adhesion.
|
A coating of E-max Press layer will be used at the inner surface of the bridge to improve adhesion
|
연구는 무엇을 측정합니까?
주요 결과 측정
결과 측정 |
측정값 설명 |
기간 |
---|---|---|
Change in marginal fit
기간: Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
To examine if there is a gap between inlay margins and tooth cavity margins .It will be measured by a probe.
|
Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
Change in Material Integrity
기간: Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
To examine macroscopically the presence of cracks or fractures in the veneering ceramic (retainers or pontics) or any fractures at the connectors.
|
Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
Change in the Retention Status
기간: Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
The resistance of a prosthesis to displacement will be measured.
|
Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
2차 결과 측정
결과 측정 |
측정값 설명 |
기간 |
---|---|---|
Change in Marginal Color Matching
기간: Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
Examination will be done macroscopically to detect the presence of any difference in color between the margins of the tooth and inlays
|
Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
기타 결과 측정
결과 측정 |
측정값 설명 |
기간 |
---|---|---|
Change in Sensitivity
기간: Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
The presence of any spontaneous or stimulated pain will be assumed.
|
Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
Change in Patients' Satisfaction
기간: Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
A questionnaire will be used to detect the level of satisfaction regarding function and shade
|
Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
Change in Shade
기간: Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
The shade is going to be determined using Vita(R) shade guide.
|
Immediately within five minutes following cementation (T1), 3 months (T2), 6 months (T3), 12 months (T4) following application
|
공동 작업자 및 조사자
수사관
- 수석 연구원: Mansour Abo Alkasab, DDS MSc, PhD student in Fixed Prosthodontics, University of Damascus Dental School, Damascus, Syria
- 연구 책임자: Jihad Abo Nassar, DDS MSc PhD, Associate Professor of Fixed Prosthodontics, University of Damascus Dental School, Damascus, Syria
간행물 및 유용한 링크
일반 간행물
- Coelho PG, Bonfante EA, Silva NR, Rekow ED, Thompson VP. Laboratory simulation of Y-TZP all-ceramic crown clinical failures. J Dent Res. 2009 Apr;88(4):382-6. doi: 10.1177/0022034509333968.
- Cura C, Ozcan M, Isik G, Saracoglu A. Comparison of alternative adhesive cementation concepts for zirconia ceramic: glaze layer vs zirconia primer. J Adhes Dent. 2012 Feb;14(1):75-82. doi: 10.3290/j.jad.a21493.
- Monaco C, Ferrari M, Caldari M, Baldissara P, Scotti R. Comparison of 2 bonding systems and survival of fiber-reinforced composite inlay fixed partial dentures. Int J Prosthodont. 2006 Nov-Dec;19(6):577-85.
- Raigrodski AJ, Chiche GJ, Potiket N, Hochstedler JL, Mohamed SE, Billiot S, Mercante DE. The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study. J Prosthet Dent. 2006 Oct;96(4):237-44. doi: 10.1016/j.prosdent.2006.08.010.
- Sanli S, Comlekoglu MD, Comlekoglu E, Sonugelen M, Pamir T, Darvell BW. Influence of surface treatment on the resin-bonding of zirconia. Dent Mater. 2015 Jun;31(6):657-68. doi: 10.1016/j.dental.2015.03.004. Epub 2015 Apr 7.
- Valentino TA, Borges GA, Borges LH, Platt JA, Correr-Sobrinho L. Influence of glazed zirconia on dual-cure luting agent bond strength. Oper Dent. 2012 Mar-Apr;37(2):181-7. doi: 10.2341/10-220-L. Epub 2011 Dec 14.
- Chaar MS, Kern M. Five-year clinical outcome of posterior zirconia ceramic inlay-retained FDPs with a modified design. J Dent. 2015 Dec;43(12):1411-5. doi: 10.1016/j.jdent.2015.11.001. Epub 2015 Nov 10.
- Monaco C, Cardelli P, Ozcan M. Inlay-retained zirconia fixed dental prostheses: modified designs for a completely adhesive approach. J Can Dent Assoc. 2011;77:b86.
연구 기록 날짜
연구 주요 날짜
연구 시작 (실제)
기본 완료 (실제)
연구 완료 (실제)
연구 등록 날짜
최초 제출
QC 기준을 충족하는 최초 제출
처음 게시됨 (추정)
연구 기록 업데이트
마지막 업데이트 게시됨 (실제)
QC 기준을 충족하는 마지막 업데이트 제출
마지막으로 확인됨
추가 정보
이 연구와 관련된 용어
기타 연구 ID 번호
- UDDS-FixPro-02-2016
개별 참가자 데이터(IPD) 계획
개별 참가자 데이터(IPD)를 공유할 계획입니까?
이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .
Glaze layer에 대한 임상 시험
-
Integra LifeSciences Corporation종료됨
-
Università degli Studi di FerraraAzienda USL Ferrara모병
-
Integra LifeSciences CorporationSt Vincent's Hospital완전한
-
Daniel Rodriguez PerezInstitut d'Investigació Biomèdica de Bellvitge; Institut Català de la Salut모병