Clinical Evaluation of Acuity 200 (Fluoroxyfocon A) RGP Contact Lens (Acuity 200)

May 11, 2020 updated by: Acuity Polymers, Inc.

Clinical Evaluation of Safety and Effectiveness for the Acuity 200 (Fluoroxyfocon A) Rigid Gas Permeable Contact Lens

The objective of this clinical investigation is to collect valid scientific safety and effectiveness data on the Acuity 200 (fluoroxyfocon A) Rigid Gas Permeable Contact Lens, manufactured from a newly developed rigid gas permeable material that is highly permeable to oxygen. The clinical performance data reported from this study is intended to be submitted to the U.S. Food and Drug Administration Center for Devices and Radiological Health (CDRH) in support of a 510(k) premarket notification.

Study Overview

Detailed Description

This is an open-label, multi-center, randomized concurrent-control study with the treatment duration of 90 days. Subjects will be recruited into the study based upon the inclusion and exclusion criteria provided. Eligible subjects will be examined for baseline evaluation and lens fitting. Up to sixty (60) subjects will wear the test contact lenses for daily wear and up to twenty-eight (28) subjects will wear the control contact lenses. The subjects will attend seven scheduled study visits and will undergo standard ophthalmic evaluation for contact lens care. The subjects will be followed for a period of three months (90 days) following dispensing of the Test and Control Device.

Study Type

Interventional

Enrollment (Actual)

74

Phase

  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

    • Hawaii
      • Honolulu, Hawaii, United States, 96814
        • Ala Mona Advanced Eye Clinic
    • Minnesota
      • Edina, Minnesota, United States, 55436
        • Cornea and Contact Lens Institute of Minnesota
    • New York
      • Pittsford, New York, United States, 14534
        • Reed Eye Associates

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

18 years and older (Adult, Older Adult)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

Prior to being considered eligible to participate in this study, each subject MUST:

  • Be at least 18 years of age as of the date of evaluation.
  • Have:

    • read the Informed Consent,
    • been given an explanation of the Informed Consent,
    • indicated an understanding of the Informed Consent and
    • signed the Informed Consent Form.
  • Be willing and able to adhere to the instructions set forth in this protocol and able to keep all specified appointments.
  • Be a current contact lens wearer.
  • Possess wearable and visually functional eyeglasses.
  • Be in good general health, based on his/her knowledge.
  • Require spectacle lens powers between +10.00 and -10.00 diopters sphere with no more than 2.5 diopters of spectacle refractive astigmatism and be willing to wear lenses in both eyes.
  • Have manifest refraction visual acuity equal to or better than 0.10 log MAR (20/25 Snellen) in each eye.

Exclusion Criteria:

Subjects may not be enrolled into the study if ANY of the following apply:

  • Subject is wearing lenses in a mono-vision modality and is unwilling to be fit with distance lenses in both eyes. NOTE: Subjects may NOT wear mono-vision lenses at any time during the study as it will interfere with the distance visual acuity measurement.
  • Subject appears to exhibit poor personal hygiene (that in the investigator's opinion might prevent safe contact lens wear).
  • Subject is currently or within 30 days prior to this study has been an active participant in another clinical study.
  • Subject is currently pregnant (to the best of the subject's knowledge), is planning a pregnancy within the next 3 months or is lactating.
  • Subject is a member, relative or household member of the office staff, including the investigator(s).
  • Subject has a known sensitivity to ingredients used in contact lens care products or over-the-counter lubricants and artificial tears.
  • Subject has undergone refractive surgery or is currently receiving or has previously received orthokeratology treatment.
  • Subject is aphakic or pseudophakic.
  • Subject has ocular or systemic disease such as, but not limited to: anterior uveitis or iritis (past or present), glaucoma, Sjögren's syndrome lupus erythematosus, scleroderma, keratoconus or type II diabetes.
  • Subject has 2.5 diopters or great of corneal astigmatism.
  • Use of ocular medications for any reason or systemic medications which might interfere with contact lens wear.
  • A known history of corneal hypoesthesia (reduced corneal sensitivity).
  • Slit lamp findings that would contraindicate contact lens wear, including but not limited to:

    • History of corneal ulcer, corneal infiltrates or fungal infections
    • Corneal scars within the visual axis
    • Pterygium
    • Dry eye symptoms with decrease tear levels and punctate staining ≥ Grade 2
    • Neovascularization or ghost vessels ≥l.5 mm in from the limbus
    • Seborrhoeic eczema, seborrhoeic conjunctivitis
    • History of papillary conjunctivitis that has interfered with lens wear or a current condition of Grade 2 (Mild) or greater
  • Clinically significant (Grade 3 or 4) anterior segment abnormalities or any infection of the eye, lids, or associated structures.
  • The investigator for any reason considers that it is not in the best interest of the subject to participate in the study.

To be eligible to be randomized for study product trial a subject must have ALL of the inclusion criteria and NONE of the exclusion criteria present. To be eligible for lens dispensing, the subject's study device contact lens visual acuity must be equal to or better than 0.20 log MAR (20/32 Snellen) in each eye

-

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Single Group Assignment
  • Masking: None (Open Label)

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Experimental: Acuity 200 contact lens
Rigid gas permeable contact lens for daily wear, fluoroxyfocon A
Daily wear rigid gas permeable contact lens
Active Comparator: Acuity 100 contact lens
Rigid gas permeable contact lens for daily wear, hexafocon A
Daily wear rigid gas permeable contact lens

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Visual Acuity
Time Frame: 90 days
Comparison of the corrected visual acuity (logMAR) between the Test and Control lens. The working hypothesis is that the visual acuity results will be substantially equivalent between the Test and the Control lenses.
90 days
Slit Lamp Exam Observations
Time Frame: 90 days
Comparison of slit lamp exam findings (scored from 0-4) between Test and Control arms. The working hypothesis is that the findings will be substantially equivalent between the Test and the Control lenses.
90 days
Adverse Events
Time Frame: 90 days
Comparison of the number of device related adverse events in the Test and Control arms. The working hypothesis is that the number of adverse events will be substantially equivalent between the Test and the Control lenses.
90 days

Secondary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Subjective Symptoms
Time Frame: 90 days
Comparison of subjective symptoms (scored from 0-5) between Test and Control arms. The working hypothesis is that the symptoms will be substantially equivalent between the Test and the Control lenses.
90 days

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Investigators

  • Study Chair: James A Bonafini, BS,MS, Acuity Polymers

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

April 1, 2019

Primary Completion (Actual)

March 19, 2020

Study Completion (Actual)

March 19, 2020

Study Registration Dates

First Submitted

May 30, 2019

First Submitted That Met QC Criteria

May 30, 2019

First Posted (Actual)

June 3, 2019

Study Record Updates

Last Update Posted (Actual)

May 12, 2020

Last Update Submitted That Met QC Criteria

May 11, 2020

Last Verified

January 1, 2020

More Information

Terms related to this study

Additional Relevant MeSH Terms

Other Study ID Numbers

  • AVDR 2019-02 v1.0

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

Yes

product manufactured in and exported from the U.S.

Yes

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Refractive Errors

Clinical Trials on Acuity 200 (Fluoroxyfocon A) contact lens

Subscribe