Comparing the Fit and Performance of Scleral Lenses With Oval and Circular Limbal Zones (CHIMERA)

May 1, 2026 updated by: University of Waterloo

Scleral lenses are large, rigid contact lenses that rest on the white part of the eye and arch over the cornea. They are commonly used to improve vision in people with eye conditions like keratoconus or corneal scarring, but are increasingly popular among people with high prescriptions or dry eyes due to the comfort and clarity they provide.

While these lenses offer many benefits, fitting them properly can be difficult, especially over the limbus, the border between the clear front surface of the eye and the white part of the eye. This area is home to important stem cells that help keep the eye healthy. Most lenses today are designed to fit the limbus as if it were perfectly round, but new research shows the limbus is actually more oval-shaped. When scleral lenses do not match this shape, they may press too hard in some areas or leave too much space in other areas of the limbus, potentially causing discomfort or long-term eye health problems.

This study will test whether lenses designed with an oval-shaped limbal zone provide a better fit and greater comfort than traditional round designs. To do this, advanced eye imaging and computer modelling will be used to measure the limbus and customize scleral lens design for each participant.

All lenses used in the study are already approved and available in Canada. The results may help improve lens comfort and safety for people who rely on scleral lenses every day.

Study Overview

Status

Completed

Conditions

Intervention / Treatment

Detailed Description

Scleral lenses are large diameter rigid contact lenses with a wide range of clinical applications. Traditionally, scleral lenses are used for visual rehabilitation of patients with irregular corneas, such as patients with keratoconus or corneal scarring. In these patients, scleral lenses are the mainstay of treatment, as they significantly improve visual acuity and quality. Recently, scleral lenses have gained popularity amongst patients without corneal abnormalities for their ability to correct high prescriptions and provide relief from dry eye symptoms. Scleral lenses are a growing field of interest in eye care, and many new technologies have emerged in recent years to assist with scleral lens fitting.

Fitting scleral lenses, however, is not without challenges, and currently available scleral lens fitting strategies may not be adequate for the long-term needs of all patients. In particular, fitting of scleral lenses over the limbal area is known to be suboptimal. The limbus is the transitional area between the clear cornea and the white sclera. It contains numerous limbal stem cells crucial to maintaining long-term corneal health. Currently, the majority of contemporary scleral lens designs only involve a uniform circular-shaped area to fit over the limbus. However, several reports have recently shown that the human limbus is of an oval rather than a circular shape. Furthermore, there is currently limited information on the elevation/height of the limbal zone, including whether the height of the limbal zone is the same or different in each quadrant and whether this should be compensated for in lens design and fitting. The mismatch between the limbal zone design in a scleral lens and the true limbal shape leads to inappropriate fit of scleral lenses in the limbal area: typically, there can be excessive and inadequate clearance over the limbus in different parts of the same eye. Excessive and inadequate clearance both cause stress to the limbal stem cells, which is hypothesized to compromise patient comfort and risk the health of the cornea long-term.

To enhance lens comfort and minimize the risk of compromising ocular health, scleral lenses must be designed with an accurate understanding of the limbus's shape and dimensions. Achieving this requires a reliable and efficient method for capturing and analyzing limbal data. One such method involves a computational approach that uses Zernike polynomial-based modeling to identify limbal points on a corneoscleral topography scan, a technique previously validated on model eye scans. The proposed study will evaluate the performance of scleral lenses with oval versus circular limbal zones, using limbal width measurements obtained through a customized MATLAB program based on this method. The hypothesis is that when compared to scleral lenses designed with a standard, circular, non-customized limbal zone, scleral lenses with an oval limbal zone may result in more even limbal clearance 360, which leads to less corneal observations (e.g. corneal staining, corneal microcysts) related to scleral lens fit issues in the limbal area (e.g. limbal congestion, limbal touch, conjunctival prolapse), less lens decentration and better subjective comfort when worn.

The study lenses are marketed and commercially available in Canada.

Study Type

Interventional

Enrollment (Actual)

7

Phase

  • Phase 4

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

    • Ontario
      • Waterloo, Ontario, Canada, N2L 3G1
        • School of Optometry & Vision Science, University of Waterloo

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

  • Adult
  • Older Adult

Accepts Healthy Volunteers

Yes

Description

Inclusion Criteria:

  • Are at least 18 years of age and has full legal capacity to volunteer;
  • Have signed an information consent letter;
  • Are willing and able to follow instructions and maintain the appointment schedule;
  • Are existing wearers of WAVE ScleraLens in one or both eyes.

Exclusion Criteria:

  • Are participating in any concurrent clinical or research study;
  • Have any known active* ocular disease and/or infection;
  • Have known sensitivity to the diagnostic pharmaceuticals to be used in the study;
  • Have taken part in another (pharmaceutical) research study within the last 30 days; * For the purposes of this study, active ocular disease is defined as infection or inflammation which requires therapeutic treatment. Mild (i.e. not considered clinically relevant) lid abnormalities (blepharitis, meibomian gland dysfunction, papillae), corneal and conjunctival staining and mild dry eye are not considered active ocular disease. Neovascularization and corneal scars are the result of previous hypoxia, infection or inflammation and are therefore not active.

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Crossover Assignment
  • Masking: Double

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Experimental: Scleral lenses with an oval limbal zone
Scleral lenses with an oval limbal zone designed with a scleral lens custom design software (WAVE Contact Lens System)
Scleral lenses designed with oval and circular limbal zone designs
Active Comparator: Scleral lenses with a circular limbal zone
Scleral lenses with a circular limbal zone designed with a scleral lens custom design software (WAVE Contact Lens System)
Scleral lenses designed with oval and circular limbal zone designs

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Limbal clearance in 4 semi-meridians (superior, nasal, inferior and temporal) of a scleral lens
Time Frame: at the Follow-up Visits 2 weeks and 4 weeks after the start of the study
Measured in microns on an Anterion anterior segment OCT scan using the built-in calipers.
at the Follow-up Visits 2 weeks and 4 weeks after the start of the study

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Investigators

  • Principal Investigator: Lyndon Jones, PhD, FCOptom, University of Waterloo

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

January 13, 2026

Primary Completion (Actual)

March 18, 2026

Study Completion (Actual)

March 18, 2026

Study Registration Dates

First Submitted

September 4, 2025

First Submitted That Met QC Criteria

December 3, 2025

First Posted (Actual)

December 17, 2025

Study Record Updates

Last Update Posted (Actual)

May 5, 2026

Last Update Submitted That Met QC Criteria

May 1, 2026

Last Verified

December 1, 2025

More Information

Terms related to this study

Keywords

Other Study ID Numbers

  • 47580

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

product manufactured in and exported from the U.S.

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Limbus Corneae

Clinical Trials on Scleral lenses

Subscribe