Experimental Pain Study to Assess Local Anesthetic Efficacy and Safety of CTY-5339 Anesthetic Spray in Normal Volunteers

June 24, 2019 updated by: Cetylite Industries

A Double-blind, Partial Cross-over, Incomplete Factorial Study to Assess the Local Anesthetic Efficacy and Safety of CTY-5339 Anesthetic Spray (CTY-5339-A) When Applied to the Cheek Mucosal Tissue in Normal Volunteers

The purpose of this study is to determine if the topical application to cheek tissue of the combination of benzocaine and tetracaine has a longer duration of local anesthetic activity than benzocaine alone.

Study Overview

Detailed Description

In a blinded study, either benzocaine alone of the combination of benzocaine and tetracaine will be sprayed onto the cheek mucosal tissue. Onset and duration of local anesthesia will be evaluated over a one hour period using pin prick and QST heat stimulation. Subjects will receive both treatments in a cross-over design with each session separated by 5-7 days. A total of 76 subjects (normal volunteers) will be evaluated.

Study Type

Interventional

Enrollment (Actual)

40

Phase

  • Phase 2

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

    • Pennsylvania
      • Philadelphia, Pennsylvania, United States, 19104
        • University of Pennsylvania, School of Dental Medicine Department of Oral & Maxillofacial Surgery

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

18 years to 75 years (Adult, Older Adult)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • Male and female subjects between 18-75 years of age with a Body Mass Index (BMI) ≤32;
  • Subjects are ASA Category I or II and are in normal physical health as judged by physical and laboratory examinations;
  • Subjects with normal appearance of the oral mucosal tissues;
  • Subjects must agree to refrain from ingesting any systemic or topical analgesic medication for 3 days or 5 half-lives of the drug prior to and during the study period and alcohol for 1 day prior to and during the study period;
  • Subjects must agree to refrain from using mouth rinses, cough drops or throat lozenges on the day of each test session;
  • Female subjects must be physically incapable of childbearing potential (postmenopausal for more than 1 year or surgically sterile) or practicing an acceptable method of contraception (hormonal, barrier with spermicide, intrauterine device, vasectomized or same sex partner, or abstinence). Subjects using hormonal birth control must have been on a stable dose of treatment for at least 30 days and received at least 1 cycle of treatment prior to randomization. At Screening and at Baseline of both sessions, all females of childbearing potential must have a negative urine pregnancy test and not be breastfeeding;
  • Negative urine drug screen for drugs of abuse at Screening and at Baseline for each Study Session. A positive drug screen result may be permitted if the subject has been on a stable dose of an allowed medication for >30 days;
  • The subject is capable of reading, comprehending, and signing the informed consent form.

Exclusion Criteria:

  • Subjects with a history of any significant hepatic, renal, endocrine, cardiac, neurological, psychiatric, gastrointestinal, pulmonary, hematologic, or metabolic disorders, including glaucoma, diabetes, emphysema, and chronic bronchitis;
  • Subjects with a history of any type of cancer other than skin related cancers;
  • Subjects with conditions that affect the absorption, metabolism, or passage of drugs out of the body, (e.g., sprue, celiac disease, Crohn's disease, colitis, or liver, kidney, or thyroid conditions);
  • Subjects with any history of alcohol or substance abuse (including a positive drug screen test);
  • Subjects that currently have or have a history of uncontrolled hypertension;
  • Subjects with a known hypersensitivity to any local anesthetic drug;
  • Subjects with a hematocrit level significantly below the normal range on the screening laboratory examination (as judged by the PI);
  • Subjects with any clinically significant abnormal lab result (as judged by the PI);
  • Subjects with any condition or history felt by the Investigator to place the subject at increased risk;
  • Subjects who have smoked or chewed tobacco-containing substances within 6 months prior to the start of the study;
  • Subjects judged by the Investigator to be unable or unwilling to comply with the requirements of the protocol;
  • Subjects who have used an investigational drug within 30 days prior to entering the study;
  • Subjects who have donated blood within 3 months prior to the start of the study;
  • Subjects who have previously participated in the trial;
  • Subjects who are members of the study site staff directly involved with the study or a relative of the Sponsor or other personnel involved with the study.

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Prevention
  • Allocation: Randomized
  • Interventional Model: Crossover Assignment
  • Masking: Double

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Experimental: One spray CTY-5339-A, then one spray CTY-5339-CB
A single spray of CTY-5339-A Anesthetic Spray (14.0% benzocaine and 2.0% tetracaine HCl) tested over a 60 minute session, followed by a 4-14 day washout period, followed by a single spray of CTY-5339-CB Anesthetic Spray (14.0% benzocaine) tested over a 60 minute session.
Metered spray bottle with ≈200 uL total spray volume. Contains the active ingredients: 14.0% Benzocaine (USP = 28 mg) and 2.0% Tetracaine Hydrochloride (USP = 4 mg). Administered in a single anesthetic spray.
Other Names:
  • CTY-5339-A
  • CTY-5339 Anesthetic Spray
  • benzocaine
  • tetracaine
  • tetracaine HCl
  • 14.0% benzocaine
  • 2.0% tetracaine HCl
  • 2.0% tetracaine
  • 14.0% benzocaine and 2.0% tetracaine HCl
  • 14.0% benzocaine and 2.0% tetracaine
  • benzocaine and tetracaine HCl
  • benzocaine and tetracaine
Metered spray bottle with ≈200 uL total spray volume. Contains the active ingredient: 14.0% Benzocaine (USP = 28 mg). Administered in a single anesthetic spray.
Other Names:
  • benzocaine
  • 14.0% benzocaine
  • CTY-5339-CB
Experimental: 2 sprays CTY-5339-A, then 1 spray CTY-5339-CB +1 spray placebo
Two sprays of CTY-5339-A Anesthetic Spray (14.0% benzocaine and 2.0% tetracaine HCl) tested over a 60 minute session, followed by a 4-14 day washout period, followed by a single spray of CTY-5339-CB Anesthetic Spray (14.0% benzocaine) and a single spray of vehicle control (CTY-5339-P) (sprayed outside the circumscribed area to avoid dilution of active drug) tested over a 60 minute session.
Metered spray bottle with ≈400 uL total spray volume. Contains the active ingredients: 14.0% Benzocaine (USP = 56 mg total) and 2.0% Tetracaine Hydrochloride (USP = 8 mg total). Administered in two anesthetic sprays.
Other Names:
  • CTY-5339-A
  • CTY-5339 Anesthetic Spray
  • benzocaine
  • tetracaine
  • tetracaine HCl
  • 14.0% benzocaine
  • 2.0% tetracaine HCl
  • 2.0% tetracaine
  • 14.0% benzocaine and 2.0% tetracaine HCl
  • 14.0% benzocaine and 2.0% tetracaine
  • benzocaine and tetracaine HCl
  • benzocaine and tetracaine
A single spray of CTY-5339-CB in a metered spray bottle with ≈200 uL total spray volume, containing the active ingredient: 14.0% Benzocaine (USP = 28 mg). This was administered in combination with a single spray of CTY-5339-P (acting as vehicle control placebo with no active ingredient) in a metered spray bottle with ≈200 uL total spray volume. This combination was used to maintain double-blind conditions. The vehicle control was sprayed outside the circumscribed area to avoid dilution of active drug.
Other Names:
  • benzocaine
  • 14.0% benzocaine
  • CTY-5339-CB and Placebo
  • CTY-5339-CB and Vehicle Control
  • CTY-5339-CB and Control
  • benzocaine and Placebo
  • benzocaine and Vehicle Control
  • benzocaine and Control
  • 14.0% benzocaine and Placebo
  • 14.0% benzocaine and Vehicle Control
  • 14.0% benzocaine and Control
Experimental: One spray of CTY-5339-CB, then one spray CTY-5339-A
A single spray of CTY-5339-CB Anesthetic Spray (14.0% benzocaine) tested over a 60 minute session, followed by a 4-14 day washout period, followed by a single spray of CTY-5339-A Anesthetic Spray (14.0% benzocaine and 2.0% tetracaine HCl) tested over a 60 minute session.
Metered spray bottle with ≈200 uL total spray volume. Contains the active ingredients: 14.0% Benzocaine (USP = 28 mg) and 2.0% Tetracaine Hydrochloride (USP = 4 mg). Administered in a single anesthetic spray.
Other Names:
  • CTY-5339-A
  • CTY-5339 Anesthetic Spray
  • benzocaine
  • tetracaine
  • tetracaine HCl
  • 14.0% benzocaine
  • 2.0% tetracaine HCl
  • 2.0% tetracaine
  • 14.0% benzocaine and 2.0% tetracaine HCl
  • 14.0% benzocaine and 2.0% tetracaine
  • benzocaine and tetracaine HCl
  • benzocaine and tetracaine
Metered spray bottle with ≈200 uL total spray volume. Contains the active ingredient: 14.0% Benzocaine (USP = 28 mg). Administered in a single anesthetic spray.
Other Names:
  • benzocaine
  • 14.0% benzocaine
  • CTY-5339-CB
Experimental: 1 spray CTY-5339-CB +1 spray placebo, then 2 sprays CTY-5339-A
A single spray of CTY-5339-CB Anesthetic Spray (14.0% benzocaine) and a single spray of vehicle control (CTY-5339-P) (sprayed outside the circumscribed area to avoid dilution of active drug) tested over a 60 minute session, followed by a 4-14 day washout period, followed by a two sprays of CTY-5339-A Anesthetic Spray (14.0% benzocaine and 2.0% tetracaine HCl) tested over a 60 minute session.
Metered spray bottle with ≈400 uL total spray volume. Contains the active ingredients: 14.0% Benzocaine (USP = 56 mg total) and 2.0% Tetracaine Hydrochloride (USP = 8 mg total). Administered in two anesthetic sprays.
Other Names:
  • CTY-5339-A
  • CTY-5339 Anesthetic Spray
  • benzocaine
  • tetracaine
  • tetracaine HCl
  • 14.0% benzocaine
  • 2.0% tetracaine HCl
  • 2.0% tetracaine
  • 14.0% benzocaine and 2.0% tetracaine HCl
  • 14.0% benzocaine and 2.0% tetracaine
  • benzocaine and tetracaine HCl
  • benzocaine and tetracaine
A single spray of CTY-5339-CB in a metered spray bottle with ≈200 uL total spray volume, containing the active ingredient: 14.0% Benzocaine (USP = 28 mg). This was administered in combination with a single spray of CTY-5339-P (acting as vehicle control placebo with no active ingredient) in a metered spray bottle with ≈200 uL total spray volume. This combination was used to maintain double-blind conditions. The vehicle control was sprayed outside the circumscribed area to avoid dilution of active drug.
Other Names:
  • benzocaine
  • 14.0% benzocaine
  • CTY-5339-CB and Placebo
  • CTY-5339-CB and Vehicle Control
  • CTY-5339-CB and Control
  • benzocaine and Placebo
  • benzocaine and Vehicle Control
  • benzocaine and Control
  • 14.0% benzocaine and Placebo
  • 14.0% benzocaine and Vehicle Control
  • 14.0% benzocaine and Control

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Duration of Anesthesia as Measured by Pin Prick Test (PPT) for One Spray CTY-5339-A Compared to One Spray CTY-5339-CB
Time Frame: Change in pain assessment from baseline (time of application) up to one hour post-application

Evaluations were completed at 1-minute intervals for the first 5 minutes to capture onset of anesthesia. Starting at 5 minutes after drug administration, the PPT was done at 5 minute intervals up to the one hour time point. If there was no indication of anesthesia by 10 minutes, the subject was considered a treatment failure and the assessment of PPT was discontinued. In addition, once onset of anesthesia had occurred, if there was no longer any anesthesia at two consecutive evaluation time points from 10 minutes onward, the assessment of PPT was discontinued.

The PPT was assessed using a 90-mm, 26-gauge pencil-point spinal needle. At screening, 3 pin pricks were performed on each cheek. Pin pricks were assessed using a 0 (no pain) to 10 (severe pain) Numerical Rating Scale (NRS). In order to be eligible for the study, for each cheek, subjects must have had a minimum score of "3" for the last 2 pin pricks, and one of those scores had to be "4" or higher.

Change in pain assessment from baseline (time of application) up to one hour post-application
Duration of Anesthesia as Measured by Heat Sensation Threshold (QST Heat) for One Spray CTY-5339-A Compared to One Spray CTY-5339-CB
Time Frame: Change in temperature from baseline (time of application) up to one hour post-application

Starting at 5 minutes after drug administration, the QST was done at 5 minute intervals up to the one hour time point. If there was no indication of anesthesia by 10 minutes, the subject was considered a treatment failure and the assessment of PPT was discontinued. In addition, once onset of anesthesia had occurred, if there was no longer any anesthesia at two consecutive evaluation time points from 10 minutes onward, the assessment of QST was discontinued.

The heat stimuli were delivered in 3 repetitions, with inter-stimulus intervals of 30s. The basal thermode temperature was set at a comfortable 35ºC. The rate at which the thermode heated up was set at 0.5ºC/s, while the rate at which it cooled down was set at 8ºC/s. The maximum thermode temperature was set at 51ºC. Heat sensation threshold was defined as the temperature at which the subjects first felt tingling, warmth, heat, or pain.

Change in temperature from baseline (time of application) up to one hour post-application

Secondary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Duration of Anesthesia as Measured by Pin Prick Test (PPT) for Two Sprays CTY-5339-A Compared to One Spray CTY-5339-CB in Combination With One Spray CTY-5339-P (Placebo)
Time Frame: Time of application up to one hour post-application
Assessments will be made over a period of one hour, with assessments at 1 minute intervals for the first 5 minutes and then every 5 minutes after that. Duration of effect was defined as the time (in minutes) from onset to treatment failure (i.e., for PPT, an assessment of "Same/More" pain, and for QST, the average heat temperature was greater than the average heat temperature at Baseline (non-treated cheek), up to the 60-minute time point (at two consecutive time points).
Time of application up to one hour post-application
Duration of Anesthesia as Measured by QST Heat for Two Sprays CTY-5339-A Compared to One Spray CTY-5339-CB in Combination With One Spray CTY-5339-P (Placebo)
Time Frame: Time of application up to one hour post-application
Assessments will be made over a period of one hour, with assessments at 1 minute intervals for the first 5 minutes and then every 5 minutes after that. Duration of effect was defined as the time (in minutes) from onset to treatment failure (i.e., for PPT, an assessment of "Same/More" pain, and for QST, the average heat temperature was greater than the average heat temperature at Baseline (non-treated cheek), up to the 60-minute time point (at two consecutive time points).
Time of application up to one hour post-application
Duration of Anesthesia as Measured by PPT for One Spray CTY-5339-A Compared to Two Sprays CTY-5339-A
Time Frame: Time of application up to one hour post-application
Assessments will be made over a period of one hour, with assessments at 1 minute intervals for the first 5 minutes and then every 5 minutes after that.
Time of application up to one hour post-application
Duration of Anesthesia as Measured by QST Heat for One Spray CTY-5339-A Compared to Two Sprays CTY-5339-A
Time Frame: Time of application up to one hour post-application
Assessments will be made over a period of one hour, with assessments at 1 minute intervals for the first 5 minutes and then every 5 minutes after that.
Time of application up to one hour post-application
Onset of Anesthesia for PPT
Time Frame: Time of application up to one hour post-application
Assessments will be made over a period of one hour, with assessments at 1 minute intervals for the first 5 minutes and then every 5 minutes after that.
Time of application up to one hour post-application
Onset of Anesthesia for QST Heat
Time Frame: Time of application up to one hour post-application
Assessments will be made over a period of one hour, with assessments at 1 minute intervals for the first 5 minutes and then every 5 minutes after that.
Time of application up to one hour post-application
Percentage of Responders for PPT at Each Time Point
Time Frame: Time of application up to one hour post-application
Assessments will be made over a period of one hour, with assessments at 1 minute intervals for the first 5 minutes and then every 5 minutes after that.
Time of application up to one hour post-application
Percentage of Responders for QST Heat at Each Time Point
Time Frame: Time of application up to one hour post-application
Assessments will be made over a period of one hour, with assessments at 1 minute intervals for the first 5 minutes and then every 5 minutes after that.
Time of application up to one hour post-application

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Investigators

  • Principal Investigator: Elliot V Hersh, DMD, Ph.D., University of Pennsylvania

Publications and helpful links

The person responsible for entering information about the study voluntarily provides these publications. These may be about anything related to the study.

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

December 7, 2016

Primary Completion (Actual)

April 2, 2017

Study Completion (Actual)

June 7, 2017

Study Registration Dates

First Submitted

September 2, 2016

First Submitted That Met QC Criteria

September 16, 2016

First Posted (Estimate)

September 21, 2016

Study Record Updates

Last Update Posted (Actual)

July 2, 2019

Last Update Submitted That Met QC Criteria

June 24, 2019

Last Verified

June 1, 2019

More Information

Terms related to this study

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Anesthesia

Clinical Trials on One spray CTY-5339-A

Subscribe