NightOwl SpO2 Calibration Study (NOSCS)

December 10, 2019 updated by: Ectosense NV

Calibration of a software module that computes Oxygen saturation(SpO2) based on photoplethysmography (PPG) traces acquired by the NightOwl reflectance-based PPG sensor which is placed on the finger.

The study is designed in accordance with Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601- 2-61:2011)

Study Overview

Detailed Description

  1. Trial objectives The main objective of this trial is to calibrate the parameters of a software module that computes SpO2 from the digitized raw red and infrared PPG traces of the NightOwl sensor placed at the fingertip. A CO-oximeter subsequently analyses the blood samples to derive "Gold-standard" SaO2 values to which the SpO2 samples can be compared. To obtain a spectrum of SpO2 levels between 100 and 73 % of healthy subjects, FiO2 will be progressively decreased in a hypoxia chamber under the guidance of an anaesthesiologist.
  2. Endpoints Computation of Arms, the performance metric proposed by ISO 80601-2-61:2011 Annex CC: Determination of accuracy. This metric captures the bias and precision of the computed SpO2 values compared to the gold standard blood gas analysis method. The software modules' SpO2 computation accuracy (defined as Arms) will first be compared using the temporally paired oxygen saturation (SaO2) readings of the CO-oximeter benchmark.
  3. Trial Design The trial is designed as open blind, non-randomized trial for clinical data acquisition. Approximately 10 healthy subjects will be included in the study.

Groups of up to 3 subjects will enter a hypoxia chamber. These subjects will have six NightOwl sensors attached, one placed on the index, middle, and ring finger of each hand. For each patient, one Nonin pulse oximeter with a real time SpO2 display will be placed on the pinkie, such that the SpO2 values can be monitored in real time. The NightOwl will transfer data to a smartphone, which serves as a data acquisition hub during the study. Once all sensors have been attached and data acquisition has started, FiO2 (percentage of oxygen in the space being measured) of the hypoxia chamber will gradually and be lowered over a course of approximately 2 hours, under the guidance of an anaesthesiologist. The investigators will attempt to create 5 stable plateaus of FiO2 values to allow for arterial blood sample drawing of a stable SaO2 value. As soon as SpO2 measured by a Nonin device of any subject drops below 73% for one minute, this particular subject will leave the hypoxia chamber immediately. As soon as all subjects have left the chamber, FiO2 will be returned to the oxygen level of the environment. The above is repeated for the next group of subjects until the warranted number of subjects is reached. During the procedure, for each subject, approximately 25 arterial blood samples will be drawn from an arterial catheter, of which the exact time of extraction will be noted.

Study Type

Interventional

Enrollment (Anticipated)

12

Phase

  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

    • Limburg
      • Genk, Limburg, Belgium, 3600
        • Recruiting
        • CMC
        • Contact:

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

14 years to 96 years (Adult, Older Adult)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • Healthy subjects with American Society of Anaesthesiologists health score (ASA) of 1 or 2, upon signing of informed consent.
  • 15% of the study population or 2 subjects (whichever is larger) with dark pigmented skin should be included in the study

Exclusion Criteria:

  • smokers or individuals exposed to high levels of carbon monoxide that result in elevated carboxyhemoglobin levels.
  • individuals subject to conditions that result in elevated levels of methaemoglobin.

individuals with arterial cannulation or hypoxia at FiO2 = 0,21

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Basic Science
  • Allocation: N/A
  • Interventional Model: Single Group Assignment
  • Masking: None (Open Label)

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Experimental: Pulse oximeter calibration population
All subjects within this single arm of the study will undergo the calibration experiment as described in the Detailed Description
The NightOwl is a finger and/or forehead mounted device with, among other functions, the capability to acquire double-wavelength PPG, from which SpO2 can be derived

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
A_rms determination
Time Frame: Within 3 months after subject recruitment, the calibration and A_rms determination should have been performed
After calibration of the NightOwl SpO2 software module, the A_rms metric will be computed. This metric constitutes the performance metric proposed by ISO 80601-2-61:2011 Annex CC: Determination of accuracy. This metric captures the bias and precision of the computed SpO2 values compared to the benchmark.
Within 3 months after subject recruitment, the calibration and A_rms determination should have been performed

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Investigators

  • Principal Investigator: Raf De Jongh, MD PhD, Ziekenhuis Oost-Limburg

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

December 7, 2019

Primary Completion (Anticipated)

January 1, 2020

Study Completion (Anticipated)

January 1, 2020

Study Registration Dates

First Submitted

December 7, 2019

First Submitted That Met QC Criteria

December 10, 2019

First Posted (Actual)

December 11, 2019

Study Record Updates

Last Update Posted (Actual)

December 11, 2019

Last Update Submitted That Met QC Criteria

December 10, 2019

Last Verified

December 1, 2019

More Information

Terms related to this study

Other Study ID Numbers

  • 19/0073/U

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

No

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Pulse Oximeter Calibration

Clinical Trials on Pulse oximeter calibration population (NightOwl)

Subscribe