Esta página se tradujo automáticamente y no se garantiza la precisión de la traducción. por favor refiérase a versión inglesa para un texto fuente.

Management of Complex Airway Stenoses With Dedicated Tailored Stents Wrought by 3D Computer-assisted Conception (DASCAS)

4 de noviembre de 2020 actualizado por: University Hospital, Toulouse

Management of complex airway stenoses with dedicated tailored stents wrought by 3D computer-assisted conception

Dedicated Airway Stents for Central Airway Stenoses

DASCAS

Toulouse University Hospital is the sponsor of this research.

This research will be conducted with the support of AnatomikModeling and ADERSPOT

  • Background: Tracheobronchial stent are devices designed to manage central airway stenoses of various origins. Their shape and sizes are however not suitable for stenosis of complex anatomy.
  • Purpose: The investigators propose to test the feasibility and safety of treating complex airway stenoses with dedicated tailored stents wrought by 3D computer-assisted conception

Abstract: Central airway obstruction is currently managed with non-personalized stents, which are usually efficient but lead to severe and potentially lethal complications in 10% of cases (stent migration, obstructive granuloma, perforation, hemoptysis). These stents seem particularly unsuited for anatomically complex stenosis.

Dedicated airway stents (wrought and tailored by 3D computer-assisted conception based on 3D chest CT-scan), by fitting perfectly tracheal or bronchial anatomy, should dramatically improve the tolerance and safety of such prostheses.

This first feasibility study, dedicated to patients suffering from anatomically complex stenosis will test the safety of treating patients with these new approach. It should lead to larger studies evaluating these new types of stents in larger indications.

After 3D computer-assisted modelization of airways, a virtual prosthesis and its shape are designed and the shape of the stent is wrought by 3D-machining by AnatomikModeling®. The stent is then build and sterilized by Sebbin® and inserted during rigid bronchoscopy on the same terms as pre-existing models.

Close follow up is then conducted, including clinical evaluation after one week, three and six months; spirometry at one week and 6 months and chest CT-scan at one week.

Descripción general del estudio

Estado

Terminado

Intervención / Tratamiento

Descripción detallada

Study design: Prospective monocentric feasibility study

Arm number or label and arm type: Only one experimental arm

Interventions:

After signature of a informed consent

Collection of clinical data (age, sex, etiology, site and mechanism of the stenosis, previous treatments dyspnea, quality of life (VQ11 questionnaire))

Chest CT-scan without contrast under continuous positive pressure

Spirometry (peak flow, FEV1)

Computer-assisted modelization of the shape of the prosthesis using 3D reconstruction of CT-scan

Machining of the shape in Ertacetal® (AnatomikModeling®)

Fabrication and sterilization of the stent in silicon (Sebbin®)

Insertion of the stent under rigid bronchoscopy and general anesthesia

Clinical follow-up at one week, 3 months and 6 months

Chest CT-scan without contrast at 1 week, spirometry at 1 week and 6 months

Number of subjects : 10 patients

Statistical analysis:

For the primary outcome, percentages of procedures conducted without complication at 1 week, 3 months, and 6 months and their confidence interval at 95% and incidences at 1 week, 3 months and 6 months for each complication will be calculated.

For secondary outcomes:

  • Percentages of procedures conducted with improvement of dyspnea (improvement of at least one point of NYHA score) at 1 week, 3 months, and 6 months and their confidence interval at 95% will be calculated.
  • Percentages of procedures conducted with improvement of quality of life (improvement of at least 10% of VQ11 score) at 1 week, 3 months, and 6 months and their confidence interval at 95% will be calculated.
  • Percentages of procedures conducted with improvement of functional parameters (improvement of at least 20% of DEP or FEV1) at 1 week and 6 months and their confidence interval at 95% will be calculated.
  • Percentage of procedures conducted with radiologic congruence of the stent at 1 week and its confidence interval at 95% will be calculated.

Tipo de estudio

Intervencionista

Inscripción (Actual)

10

Fase

  • No aplica

Criterios de participación

Los investigadores buscan personas que se ajusten a una determinada descripción, denominada criterio de elegibilidad. Algunos ejemplos de estos criterios son el estado de salud general de una persona o tratamientos previos.

Criterio de elegibilidad

Edades elegibles para estudiar

18 años y mayores (Adulto, Adulto Mayor)

Acepta Voluntarios Saludables

No

Géneros elegibles para el estudio

Todos

Descripción

Inclusion Criteria:

  • Age > 18 years
  • Signature of the informed consent form
  • Patient with a complex upper airway stenosis .
  • Symptomatic stenosis ( Dyspnea > NYHA II , cough, PEF < 50%)
  • Stenosis whose complex anatomy does not allow the establishment of a currently available stent on the market: the assessment of the experts ( consensus decision between 3 bronchoscopistes of interventional endoscopy service) or after failure of one or several models.
  • Affiliated with a social security scheme

Exclusion Criteria:

  • Indication of implementation of emergency aid : signs of acute respiratory distress , PEF < 20 % predicted , SpO2 oxygen saturation <90 % on room air
  • Contraindication to rigid bronchoscopy (severe coagulation disorders not correct )
  • Patient under legal protection system
  • Pregnancy
  • Breastfeeding

Plan de estudios

Esta sección proporciona detalles del plan de estudio, incluido cómo está diseñado el estudio y qué mide el estudio.

¿Cómo está diseñado el estudio?

Detalles de diseño

  • Propósito principal: Tratamiento
  • Asignación: N / A
  • Modelo Intervencionista: Asignación de un solo grupo
  • Enmascaramiento: Ninguno (etiqueta abierta)

Armas e Intervenciones

Grupo de participantes/brazo
Intervención / Tratamiento
Experimental: new 3D device
dedicated tailored stents wrought by 3D computer-assisted conception
dedicated tailored stents wrought by 3D computer-assisted conception

¿Qué mide el estudio?

Medidas de resultado primarias

Medida de resultado
Medida Descripción
Periodo de tiempo
Change of percentage of procedures conducted without complications at 1 week , 3 months and 6 months
Periodo de tiempo: Change of percentage of procedures conducted without complications at 1 week, 3 months and 6 months
percentages of procedures conducted without complication at 1 week, 3 months and 6 month and their confidence interval at 95% and incidences at 1 week, 3 months and 6 months for each complication will be calculated.
Change of percentage of procedures conducted without complications at 1 week, 3 months and 6 months

Colaboradores e Investigadores

Aquí es donde encontrará personas y organizaciones involucradas en este estudio.

Investigadores

  • Investigador principal: Nicolas Guibert, Dr, University Hospital, Toulouse

Publicaciones y enlaces útiles

La persona responsable de ingresar información sobre el estudio proporciona voluntariamente estas publicaciones. Estos pueden ser sobre cualquier cosa relacionada con el estudio.

Fechas de registro del estudio

Estas fechas rastrean el progreso del registro del estudio y los envíos de resultados resumidos a ClinicalTrials.gov. Los registros del estudio y los resultados informados son revisados ​​por la Biblioteca Nacional de Medicina (NLM) para asegurarse de que cumplan con los estándares de control de calidad específicos antes de publicarlos en el sitio web público.

Fechas importantes del estudio

Inicio del estudio (Actual)

1 de septiembre de 2016

Finalización primaria (Actual)

1 de diciembre de 2019

Finalización del estudio (Actual)

1 de noviembre de 2020

Fechas de registro del estudio

Enviado por primera vez

19 de julio de 2016

Primero enviado que cumplió con los criterios de control de calidad

30 de agosto de 2016

Publicado por primera vez (Estimar)

5 de septiembre de 2016

Actualizaciones de registros de estudio

Última actualización publicada (Actual)

6 de noviembre de 2020

Última actualización enviada que cumplió con los criterios de control de calidad

4 de noviembre de 2020

Última verificación

1 de noviembre de 2020

Más información

Términos relacionados con este estudio

Otros números de identificación del estudio

  • RC31/15/7860

Plan de datos de participantes individuales (IPD)

¿Planea compartir datos de participantes individuales (IPD)?

NO

Esta información se obtuvo directamente del sitio web clinicaltrials.gov sin cambios. Si tiene alguna solicitud para cambiar, eliminar o actualizar los detalles de su estudio, comuníquese con register@clinicaltrials.gov. Tan pronto como se implemente un cambio en clinicaltrials.gov, también se actualizará automáticamente en nuestro sitio web. .

Ensayos clínicos sobre new 3D device

3
Suscribir