Evaluation of Oral Hygiene Products in an In Situ Caries Model

April 7, 2016 updated by: GlaxoSmithKline

Clinical Evaluation of Oral Hygiene Products in an In Situ Caries Model

The study will evaluate and compare the potential anti-caries efficacy of a test regimen: placebo (fluoride free) toothpaste (twice daily use) plus fluoride mouthwash (once daily use), in comparison with brushing with a placebo toothpaste alone (twice daily use), to remineralize previously demineralized enamel specimens, as measured by Surface MicroHardness Recovery (%SMHR).

This will be a single center, randomized, laboratory analyst blinded, placebo, four treatment, cross-over study in healthy participants. Participants will be assessed at baseline and at the beginning and end of each treatment visit to monitor clinical efficacy and safety.

Study Overview

Study Type

Interventional

Enrollment (Actual)

80

Phase

  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

    • Indiana
      • Indianapolis, Indiana, United States, 46202
        • GSK Investigational Site

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

18 years to 85 years (Adult, Older Adult)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

  1. Aged between 18 and 85 years inclusive
  2. Understands and is willing, able and likely to comply with all study procedures and restrictions
  3. Good general and mental health with, in the opinion of the investigator or medically qualified designee:

    • No clinically significant and relevant abnormalities in medical history or upon oral examination.
    • Absence of any condition that could affect the participant's safety or well-being or their ability to understand and follow study procedures and requirements
  4. Currently living in the Indianapolis, Indiana area and has not had a professional fluoride treatment within 14 days of the first treatment visit
  5. Currently wearing a removable mandibular partial denture with sufficient room in one posterior buccal flange areas to accommodate two enamel specimens
  6. Willing to have their denture modified to accommodate enamel test specimens and willing and capable of wearing their removable mandibular partial dentures 24 hours per day during the experimental periods
  7. Have a salivary flow rate in the range of normal values (un-stimulated whole saliva flow rate ≥ 0.2 milliliter (mL)/minute; gum base stimulated whole saliva flow rate ≥ 0.8 mL/minute).

Exclusion Criteria:

  1. Pregnant or breast feeding women
  2. Known or suspected intolerance or hypersensitivity to the study materials (or closely related compounds) or any of their stated ingredients
  3. Currently taking antibiotics or have taken antibiotics in the two weeks prior to the screening visit.
  4. Taking or have taken a bisphosphonate drug for treatment of osteoporosis.
  5. Participation in another GSKCH investigational dental product study within seven days of first study treatment.
  6. Previous participation in this study.
  7. Recent history (within the last year) of alcohol or other substance abuse.

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Crossover Assignment
  • Masking: Single

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Experimental: Placebo dentifrice/Fluoride rinse
Twice daily brushing with a non-fluoride (placebo) toothpaste followed by once daily rinsing (post night time brushing) with a fluoride mouthwash containing 220 ppm of fluoride as sodium fluoride
Brushing with fluoride free toothpaste
Fluoride mouth wash to be followed after brushing with fluoride free toothpaste in "Placebo dentifrice/Fluoride rinse" arm and in "Fluoride dentifrice/Fluoride rinse" arm
Placebo Comparator: Placebo dentifrice/No rinse
Twice daily brushing with a non-fluoride (placebo) toothpaste
Brushing with fluoride free toothpaste
Active Comparator: Fluoride dentifrice/No rinse
Twice daily brushing with a fluoride toothpaste containing 1150 ppm of fluoride as sodium fluoride
Brushing with fluoride containing toothpaste
Experimental: Fluoride dentifrice/Fluoride rinse
Twice daily brushing with a fluoride toothpaste containing 1150 ppm of fluoride as sodium fluoride, followed by once daily rinsing (post night time brushing) with a fluoride mouthwash containing 220 ppm of fluoride as sodium fluoride.
Fluoride mouth wash to be followed after brushing with fluoride free toothpaste in "Placebo dentifrice/Fluoride rinse" arm and in "Fluoride dentifrice/Fluoride rinse" arm
Brushing with fluoride containing toothpaste

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Percentage Surface Microhardness Recovery (%SMHR) of Placebo Dentifrice/Fluoride Rinse Compared to Placebo Dentifrice/No Rinse
Time Frame: Baseline to 14 days
SMHR test was used to assess the changes in mineralization status of enamel specimens using a Wilson 2100 Hardness tester. SMHR was performed ex-vivo and determined by measuring the length of the indentations of enamel specimens. An increase in the indentation length compared to the baseline indicates softening while decrease in the indentation length represents re-hardening of enamel surface. % SMH recovery was calculated from indentation length (micrometer [μm]) of sound enamel specimen at baseline(B), indentation length (μm) after in vitro demineralization(D1), indentation length (μm) after intra-oral exposure (R): [D1-R/D1-B]*100.
Baseline to 14 days

Secondary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Percentage Surface Microhardness Recovery (SMHR) of Placebo Dentifrice/Fluoride Rinse, Placebo Dentifrice/No Rinse, Fluoride Dentifrice/No Rinse and Fluoride Dentifrice/Fluoride Rinse
Time Frame: Baseline to 14 days
SMHR test was used to assess the changes in mineralization status of enamel specimens using a Wilson 2100 Hardness tester. SMHR was performed ex-vivo and determined by measuring the length of the indentations of enamel specimens. An increase in the indentation length compared to the baseline indicates softening while decrease in the indentation length represents rehardening of enamel surface. % SMH recovery was calculated from indentation length (micrometer [μm]) of sound enamel specimen at baseline(B), indentation length (μm) after in vitro demineralization(D1), indentation length (μm) after intra-oral exposure (R): [D1-R/D1-B]*100.
Baseline to 14 days
Enamel Fluoride Uptake
Time Frame: Baseline to 14 days
The microdrill enamel biopsy technique was used to analyze the fluoride uptake by enamel. Each enamel specimen was mounted on the long axis of a drill attached to a microdrill and drilled to a depth of approximately 100 micrometer (μm) through the entire lesion (four cores per specimen). The enamel powder pooled from four drilling samples was then immediately analyzed for fluoride content using fluoride specific electrode and pH/ion meter. The amount of fluoride-uptake by enamel was calculated based on the amount of fluoride divided by the area of the enamel cores and expressed as microgram per square centimeter (μg/cm^2).
Baseline to 14 days
Change in Saliva Fluoride Concentration From Baseline (Pre-treatment) to Day 14
Time Frame: Baseline to Day14
Fluoride concentration in saliva was measured after collecting saliva samples at the following time points: - at Day 1 baseline prior to supervised treatment. - at day 1 post supervised treatment at site. - at Day 14 post treatment. The amount of fluoride in the samples was calculated based on the amount of fluoride divided by the volume of the sample and expressed as μg/mL of sample.
Baseline to Day14
Change in Saliva Fluoride Concentration From Baseline (Post-treatment) to Day 14
Time Frame: Baseline up to Day 14
Fluoride concentration in saliva was measured after collecting saliva samples at the following time points: - at Day 1 post supervised treatment at site. - at Day 14 post treatment. The amount of fluoride in the samples was calculated based on the amount of fluoride divided by the volume of the sample and expressed as μg/mL of sample.
Baseline up to Day 14

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start

April 1, 2015

Primary Completion (Actual)

July 1, 2015

Study Completion (Actual)

August 1, 2015

Study Registration Dates

First Submitted

March 23, 2015

First Submitted That Met QC Criteria

March 23, 2015

First Posted (Estimate)

March 26, 2015

Study Record Updates

Last Update Posted (Estimate)

May 12, 2016

Last Update Submitted That Met QC Criteria

April 7, 2016

Last Verified

April 1, 2016

More Information

Terms related to this study

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Dental Caries

Clinical Trials on Fluoride free toothpaste

3
Subscribe