Bioequivalence Study Assessing Iron Sucrose or Venofer® in Healthy Adult Subjects

July 30, 2020 updated by: Baxter Healthcare Corporation

Bioequivalence Study Assessing a Single Dose of Iron Sucrose Injection (Baxter) or a Single Dose of Venofer® Injection in Healthy Adult Subjects

This study evaluates the bioequivalence, pharmacokinetic (PK) profile, and safety and tolerability of Iron Sucrose (Test Product) relative to that of Venofer® in healthy subjects.

Study Overview

Status

Completed

Conditions

Study Type

Interventional

Enrollment (Actual)

196

Phase

  • Phase 1

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

    • Florida
      • Miami, Florida, United States, 33126
        • Baxter Investigational SIte

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

18 years to 55 years (Adult)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • Healthy males or non-pregnant, non-lactating healthy females
  • Age 18 to 55 years of age (both inclusive)
  • Must, in the opinion of the investigator, be in good health based upon medical history, physical examination (including vital signs and ECGs) and clinical laboratory tests assessed at the time of screening
  • Body mass index (BMI) of 18.0 to 32.0 kg/m2 and a minimum body weight of 40 kg, or if outside the range, considered not clinically significant by the investigator
  • Ferritin levels not less than the lower limit of normal as defined by clinical laboratory reference ranges for female and male subjects at screening only
  • Transferrin Saturation (TSAT) not less than the lower limit of normal as defined by clinical laboratory reference ranges for female and male subjects at screening only
  • Hemoglobin levels not less than the lower limit of normal as defined by clinical laboratory reference ranges for male and female subjects
  • Must agree to use an adequate method of contraception:

    • For male subjects: Subjects willing to follow approved birth control methods (a double barrier method) for the duration of the study as judged by the investigator(s), such as condom with spermicide, condom with diaphragm, or abstinence. Subjects should also not donate sperm during this time.
    • For female subjects: Female subjects of childbearing potential, defined as a woman < 55 years of age who has not had a partial or full hysterectomy or oophorectomy, must have a negative urine pregnancy test at screening and a negative beta human chorionic gonadotropin (β-hCG) pregnancy test at admission. Subjects of childbearing potential must use a medically acceptable means of contraception during their participation in the study
  • Non-smoker, defined as: Non-smoker for > 12 months (i.e., subject has not smoked or used any tobacco product, e-cigarettes, and nicotine replacement products for the 12 months prior to the start of the study) based on subject report.
  • Must be willing and able to comply with all study requirements
  • Must be able to understand a written informed consent, which must be obtained prior to initiation of study procedures

Exclusion Criteria:

  • Hypersensitivity to iron sucrose or iron products
  • Presence or history of clinically significant allergy requiring treatment, as judged by the investigator. Hay fever is allowed unless it is active
  • Serious adverse reaction or serious hypersensitivity to any drug or the formulation excipients
  • Clinically significant abnormal biochemistry, hematology or urinalysis as judged by the investigator
  • History of iron deficiency within 6 months prior to screening
  • History of anemia within 6 months prior to screening
  • Suspicion of iron overload as evidenced by both elevated serum TSAT and serum ferritin levels
  • History of hemochromatosis
  • Bleeding disorders, acute bleeding or recently documented hemorrhage
  • Females with history of hypermenorrhea or menorrhagia
  • History of cardiovascular, pulmonary, hepatic, renal, gastrointestinal, endocrine, immunological, dermatological, neurological or psychiatric disease or disorder, as judged by the investigator
  • Must not have significant serious skin disease, including rash, food allergy, eczema, psoriasis, or urticaria
  • Female subjects who are currently pregnant, lactating, or planning to become pregnant during the study period
  • Positive hepatitis B surface antigen (HBsAg), hepatitis C virus antibody (HCV Ab) or human immunodeficiency virus (HIV) results
  • Positive drugs of abuse test result or history of drug abuse in the past 6 months based on subject report
  • Positive urinalysis test for alcohol at screening or history of alcoholism in the past 6 months based on subject report
  • Regular alcohol consumption in males >21 units per week and females >14 units per week (1 unit = ½ pint beer, or a 25 mL shot of 40% spirit, 1.5 to 2 Units = 125 mL glass of wine, depending on type)
  • Administration of an injectable drug within 14 days prior to drug administration in this study
  • Subjects who are taking, or have taken, any prescribed or over-the-counter drug (other than up to 4 g per day acetaminophen in the 14 days before IMP administration, hormonal contraceptives, or hormone replacement therapy. Exceptions may apply on a case by case basis, if considered not to interfere with the objectives of the study, as agreed by the PI and sponsor's medical monitor
  • Use of iron supplements (including iron-containing multivitamins) within 3 months of the first dose IMP administration in the study
  • Have poor venous access that limits phlebotomy
  • Subjects who have donated blood (1 unit = 450 mL) within 3 months prior to the first dose of the study drug and plasma within 7 days prior to the first dose of the study drug.
  • Subjects who have received any IMP in a clinical research study within 5 half-lives or within 30 days prior to first dose. However, in no event, shall the time between last receipt of IMP and first dose be less than 30 days
  • Subjects who are study site employees, or immediate family members of a study site or sponsor employee
  • Subjects who have previously been enrolled in this study
  • Failure to satisfy the investigator of fitness to participate for any other reason

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Parallel Assignment
  • Masking: None (Open Label)

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Experimental: Iron Sucrose Injection
IV injection (5 mL), delivered over 5 minutes to subjects that have been fasted for a minimum of 10 hours.
USP 100 mg/5 mL (20 mg/mL), solution for IV injection, 100 mg unit dose strength
Active Comparator: Venofer Injection
IV injection (5 mL), delivered over 5 minutes to subjects that have been fasted for a minimum of 10 hours.
(Iron Sucrose 20 mg/mL), solution for IV injection, 100 mg unit dose strength

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Cmax(delta)
Time Frame: Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
Maximum concentration (Cmax) across all time points for the delta difference between Total Iron (TI) and Transferrin Bound Iron (TBI). This is a PK test parameter to compare bioequivalence of two drug products.
Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
AUC0-t(delta)
Time Frame: Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
Area under the concentration curve (AUC) from time zero to last time of quantifiable concentration (Tlast) for the delta difference in AUC0-t between TI and TBI. This is a PK test parameter to compare bioequivalence of two plasma drug products.
Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)

Secondary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Cmax
Time Frame: Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
Maximum concentration (Cmax) across all time points for both TI and TBI. This is a PK test parameter to compare bioequivalence of two plasma drug products.
Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
AUC0-t
Time Frame: Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
Area under the concentration-time curve (AUC) from time zero to last sample time for both TI and TBI. This is a PK test parameter to compare bioequivalence of two drug products.
Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
AUC0-inf
Time Frame: Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
Area under the concentration-time curve (AUC) from time zero extrapolated to infinity for both TI and TBI. This is a PK test parameter to compare bioequivalence of two drug products.
Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
Tmax
Time Frame: Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
Time of occurrence of Cmax (Tmax) for both TI and TBI. This is a PK test parameter to compare bioequivalence of two drug products.
Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
t1/2
Time Frame: Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
Terminal phase half-life (t1/2) for both TI and TBI. This is a PK test parameter to compare bioequivalence of two drug products.
Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
Vz
Time Frame: Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
Volume of distribution (Vz) for both TI and TBI. This is a PK test parameter to compare bioequivalence of two drug products.
Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
CL
Time Frame: Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
Total body clearance (CL) for extravascular administration calculated by Dose/AUC for both TI and TBI. This is a PK test parameter to compare bioequivalence of two drug products.
Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
Percentage of AUCex
Time Frame: Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
AUC0-inf due to extrapolation (AUCex) from Tlast to infinity calculated by: 100 × (AUC0-inf-AUC0-t)/AUC0-inf (%AUCex) for both TI and TBI. This is a PK test parameter to compare bioequivalence of two drug products.
Hours before injection (24, 12, 0.25); Minutes after end of injection (1, 5, 10, 15, 30, 45); Hours after end of injection (1, 1.5, 2, 2.5, 3, 3.5, 4, 6, 8, 10, 12, 16, 24, 36)
Number of participants with clinically significant laboratory abnormalities
Time Frame: Day -28 (Screening) through Day 10 (Follow-up)
Any clinically significant abnormality will also be reported as an AE.
Day -28 (Screening) through Day 10 (Follow-up)
Number of participants with clinically significant findings on physical examinations
Time Frame: Day -28 (Screening) through Day 10 (Follow-up)
Any clinically significant abnormality will also be reported as an AE.
Day -28 (Screening) through Day 10 (Follow-up)
Number of participants with clinically significant changes to ECG parameters
Time Frame: Day -28 (Screening), Day -2, 0.25 hours before injection, and 6, 24 and 36 hours after end of injection
Any clinically significant abnormality will also be reported as an AE.
Day -28 (Screening), Day -2, 0.25 hours before injection, and 6, 24 and 36 hours after end of injection
Number of participants with occurrence of adverse events (AEs)
Time Frame: Day -28 (Screening) through Day 30
An AE is any untoward medical occurrence in a subject that occurs either before dosing (referred to as a pre-dose AE) or once a medicinal product has been administered, including occurrences which are not necessarily caused by or related to that product.
Day -28 (Screening) through Day 30
Number of participants with occurrence of adverse events of special interest
Time Frame: Day -28 (Screening) through Day 30
Special interest items includes hypersensitivity reactions including anaphylactic/anaphylactoid reactions.
Day -28 (Screening) through Day 30

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

September 19, 2019

Primary Completion (Actual)

December 18, 2019

Study Completion (Actual)

December 18, 2019

Study Registration Dates

First Submitted

November 5, 2019

First Submitted That Met QC Criteria

November 5, 2019

First Posted (Actual)

November 7, 2019

Study Record Updates

Last Update Posted (Actual)

July 31, 2020

Last Update Submitted That Met QC Criteria

July 30, 2020

Last Verified

July 1, 2020

More Information

Terms related to this study

Additional Relevant MeSH Terms

Other Study ID Numbers

  • BXU537298
  • QSC202208 (Other Identifier: Quotient)

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

Yes

Studies a U.S. FDA-regulated device product

No

product manufactured in and exported from the U.S.

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Iron Sucrose Injection

3
Subscribe