Hyoid Displacement During Swallowing Function for Completely Edentulous Subjects

February 26, 2024 updated by: Mansoura University

Hyoid Displacement During Swallowing Function for Completely Edentulous Subjects Rehabilitated With Mandibular Implant Retained Overdenture

To investigate the effect of wearing mandibular implant retained overdentures on superior and anterior hyoid displacement during swallowing process.

Study Overview

Detailed Description

New conventional complete denture with optimal flange extension and well established lingualized balanced occlusal scheme was constructed for every patient. To construct the radiographic stent, clear acrylic resin duplicate for the mandibular denture was constructed, several small holes were made on the polished surface of the duplicate. These holes were filled with radio-opaque gutta-percha points to act as a reference points during determination of the quantity of available bone for implant placement and for construction of stereolithographic surgical guide.

Cone beam computerized tomography [i-CAT] was used to construct the stereolithographic surgical guide by applying dual scan technique. By using the surgical guide, two dental implants (Dentium implants, 12-14mm in length, 3.6-4mm in diameter, Superline II) were placed in the canine regions of the mandibular arch with guided surgical protocol. The patients were instructed to take prophylactic antibiotic two times a day (875mg Amoxicillin and 125mg Clavulanic acid) 24 hours before the surgery and continue after the surgery for seven days. Non-steroidal anti-inflammatory drug was used to control the pain.

After surgery, the complete denture was withdrawn, and the patient was instructed to eat soft diet. After one week, the mandibular denture was relieved and relined with Cold- curing silicon based relining material (Softliner, PROMEDICA). The dentures were delivered to the patients and follow up visits were scheduled. After three to four months, the dental implants were exposed, and the healing abutments were secured to the dental implants. After healing of the soft tissue (7-10 days), the healing abutments were removed, and ball attachments (Dentium ball abutment, Superline II) were screwed to the dental implants. Direct pick-up technique was used to incorporate the housing of the attachments into the fitting surface of the mandibular denture using self-cured acrylic resin material. The occlusion of the overdenture was evaluated to eliminate any premature occlusal contact then the overdenture was delivered to the patient.

Videofluroscopic swallowing study (VFSS):

All subjects were examined by using videofluroscopic swallowing study to evaluate bolus movements. This evaluation was done at three different oral conditions, without complete denture (WCD), after 2 months of conventional complete dentures insertion (CDs), and after 2 months of implant overdenture insertion (IODs). Each patient was instructed to swallow 10 ml of thin liquid {20% barium sulfate (Prontobario H.D®) and 80% water} three times. The records of the videofluroscopic swallowing evaluation were saved to the computer for later analysis. A software Program (EO Program) was used to placing timing on the frame of the video (1/100 second) and analyze the recording by frame by frame data analysis.

a- Spatial measurements: Superior hyoid displacement (vertical movement) and anterior hyoid displacement (horizontal movement) were measured according to dynamic swallowing study performed by Rebecca Leonard & Katherine Kendall during pseudo rest position and during maximum overall hyoid displacement .24 Aline was drawn from anterior superior point of cervical spine 4 (p1) contacting anterior inferior point of cervical spine 2 (p2) and extended superiorly as necessary, then another line was extended from the anterior, inferior portion of the hyoid bone to meet the P1-P2 line at 90-degree intersection. The Measurement from the P1 to the intersection point (Hsup-rest) and from hyoid bone to the intersection point (Hant-rest) were recorded then the video was advanced until the hyoid bone showed maximum overall displacement and the previous procedure was repeated. The measurements from P1 to the intersection point (Hsup-max) and from the hyoid bone to the intersection point (Hant- max) were recoded. The difference between the maximum hyoid position (Hsup-max) and the pseudo rest position (Hsup-rest) in the vertical direction was called the superior hyoid displacement, while the difference between maximum hyoid position (Hant-max) and pseudo rest position (Hant-rest) in the horizontal direction was called anterior hyoid displacements.

B- Temporal measurements:

  1. Duration of hyoid maximum elevation (DOHME):

    Measured from the first frame showing maximum hyoid elevation to last frame showing maximum hyoid elevation.

  2. Duration of hyoid maximum anterior excursion (DOHMAE):

Measured from the first frame showing maximum anterior hyoid movement to last frame showing maximum anterior hyoid movement.

C- Penetration / aspiration scale:

Penetration was defined as the food bolus enter the airway down to the vocal folds, while aspiration defined as the food bolus enter the airway below the level of the vocal folds.

0= No penetration or aspiration

  1. Penetration
  2. Aspiration

Study Type

Interventional

Enrollment (Actual)

25

Phase

  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

      • Mansoura, Egypt, 35516
        • Faculty of Dentistry, Mansoura University

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

  • Adult
  • Older Adult

Accepts Healthy Volunteers

Yes

Description

Inclusion Criteria:

  • free from any medical problems that may affect the osseointegration of the dental implants
  • class I maxillomandibular relationship and free from any previous swallowing problems

Exclusion Criteria:

  • participants with temporomandibular joint disorder,
  • head and neck surgery,
  • sleep apnea
  • skeletal deformity

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Non-Randomized
  • Interventional Model: Crossover Assignment
  • Masking: Single

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Placebo Comparator: G. I : Completely edentulous patients
videofluroscopy for completely edentulous patients
videofluroscopy evaluation of swallowing function
Active Comparator: G.II: patients with complete dentures
complete denture construction for edentulous patient and videofluroscopy evaluation
videofluroscopy evaluation of swallowing function
. Videofluoroscopy swallowing evaluation was done using 10 ml of thin liquid bolus at three different oral conditions: Without dentures (WOD), with the conventional complete denture (CDs) and with mandibular implant retained overdenture (IODs).
Active Comparator: G.III: patients with implant overdentures
construction of implant overdenture and videofluroscopy evaluation
videofluroscopy evaluation of swallowing function
. Videofluoroscopy swallowing evaluation was done using 10 ml of thin liquid bolus at three different oral conditions: Without dentures (WOD), with the conventional complete denture (CDs) and with mandibular implant retained overdenture (IODs).

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
swallowing evaluation
Time Frame: after 3 months of denture or overdenture insertion
hyoid bone displacement evaluation by videofluriscopy
after 3 months of denture or overdenture insertion

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Investigators

  • Principal Investigator: abdallah Ibrahim, PhD, Mansoura university, Faculty of dentistry, prosthodontics department

Publications and helpful links

The person responsible for entering information about the study voluntarily provides these publications. These may be about anything related to the study.

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

December 6, 2022

Primary Completion (Actual)

July 10, 2023

Study Completion (Actual)

November 20, 2023

Study Registration Dates

First Submitted

December 17, 2023

First Submitted That Met QC Criteria

December 17, 2023

First Posted (Actual)

January 2, 2024

Study Record Updates

Last Update Posted (Estimated)

February 28, 2024

Last Update Submitted That Met QC Criteria

February 26, 2024

Last Verified

December 1, 2023

More Information

Terms related to this study

Other Study ID Numbers

  • A19061222

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

NO

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Prosthesis Durability

3
Subscribe