Pharmacokinetics of High-dose Ceftobiprole in Community-acquired Pneumonia Under Mechanical Ventilation. (PAC CEF)

November 20, 2020 updated by: Centre Hospitalier Universitaire de Nīmes

A Study on Plasma and Pulmonary Pharmacokinetics of High-dose Ceftobiprole Given by Continuous Infusion in Mechanically-ventilated Adult Patients With Severe Community-acquired Pneumonia

The main aim of the study is to describe plasma pharmacokinetics (PK) and pulmonary diffusion of high-dose ceftobiprole (500 mg loading dose followed by 2.5 g under continuous infusion for 24h) for mechanically-ventilated adult patients with severe community-acquired pneumonia, using population PK modelling.

The secondary aims are :

A- To determine whether the pharmacokinetic / pharmacodynamic (PK/PD) targets can be achieved in the plasma and epithelial lining fluid with the recommended doses of ceftobiprole.

B- To define the optimal dose regimen for ceftobiprole in this population.

C- To evaluate clinical recovery (at Day 3 and Day 8) and microbiological recovery (at Day 3).

D- To evaluate the clinical evolution.

E- To evaluate the clinical and biological tolerance.

Study Overview

Detailed Description

Pneumonia is still associated with high morbi-mortality, and rapid treatment with suitable antibiotics is required, i.e. with a broad enough spectrum to cover the activity of all the potentially-incriminated pathogens. These antibiotics must be administered at efficient doses and diffused in sufficient quantity at the infection site.

Unlike other beta-lactams, ceftobiprole is a new-generation broad-spectrum cephalosporin which is active on the majority of pathogens encountered in acute, community-acquired pneumonia (CAP) and also on methicillin-resistant staphylococcus aureus (MRSA) and non-fermenting Gram-negative bacilli (GNB) like pseudomonas aeruginosa. It is indicated for the treatment of CAP and also healthcare-associated pneumonia, other than that acquired under mechanical ventilation.

For any antibiotic administered to critically ill patients it is necessary to ensure that the pharmacokinetic/pharmacodynamic (PK/PD) targets correlated with clinical efficacy can be reached with the recommended doses. The DALI study published in 2014 was the first study to alert on the risk of plasma under-dosing when the standard doses of beta lactams were administered in severely ill patients.

Since then, several PK studies performed in the intensive care unit have confirmed the significant risk of non-optimal doses in this population, linked to physiopathological alterations caused by sepsis. So far there have been no studies specifically aimed at the pharmacokinetics of ceftobiprole in those patients with CAP requiring mechanical ventilation. Furthermore, although there is increasing use in the pharmaceutical industry and in the post-developmental phases of medicines, a population PK analysis to help describe the factors influencing the PK of a molecule and establish new dose regimens optimised for a given population (in this case an ICU population) using Monte Carlo simulations, has never been developed for ceftobiprole given by continuous infusion.

The ultimate aim of so-called adequate antibiotic therapy is to obtain the right therapeutic concentrations at the infection site. During a pulmonary infection, the targeted concentrations of antibiotics in the alveolar liquid must be above the minimal inhibitory concentration value at the end of the dose interval for so-called " time-dependent " antibiotics like cephalosporins. Obtaining these efficient concentrations is often made difficult by the beta-lactams' mediocre pulmonary diffusion and can require an increase in doses in order to reach the PK/PD target at the infection site and/or the use of continuous administration of beta-lactamines. Indeed, this way of administrating is being privileged more and more in order to optimise the time spent above the minimal inhibitory concentration.

This pharmacokinetic study is the first to be carried out among a population of ICU patients and one that focuses on pulmonary diffusion of ceftobiprole for the treatment of severe CAP. The main benefits expected are to determine the most suitable doses of ceftobiprole when this molecule is used to treat ICU patients suffering from CAP. With the help of this population analysis, the main aim of the study is therefore to describe the pharmacokinetics (PK) of the plasma and pulmonary diffusion of ceftobiprole administered at high-dosage (500 mg loading dose followed by 2.5 g under continuous infusion for 24h) for severe community-acquired pneumonia under mechanical ventilation.

The secondary aims are :

A- Determine whether the pharmacokinetic / pharmacodynamic (PK/PD) targets can be achieved in the plasma and epithelial lining fluid with the recommended doses of ceftobiprole.

B- Define the optimal dose regimen for ceftobiprole in this population. C- Evaluate the clinical recovery (at Day 3 and Day 8) and microbiological recovery (at Day 3).

D- Evaluate the clinical evolution. E- Evaluate the clinical and biological tolerance.

Study Type

Interventional

Enrollment (Anticipated)

12

Phase

  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Contact

Study Contact Backup

Study Locations

    • Auvergne-Rhône-Alpes
      • Pierre Bénite, Auvergne-Rhône-Alpes, France, 69310
    • Gard
      • Nîmes, Gard, France, 30029

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

18 years and older (ADULT, OLDER_ADULT)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • All patients (or his/her representative for those patients who are unable to express their consent) who have given free, informed consent, and signed the consent form.
  • All patients affiliated to or benefitting from a health insurance scheme.
  • All patients hospitalised in the intensive care unit with severe acute community-acquired pneumonia requiring the use of mechanical ventilation: this is characterised by signs and symptoms corresponding to an infection of the lower respiratory tract and imaging data corresponding to bacterial pneumonia.The patient has been under mechanical ventilation for less than 24 hours.

Exclusion Criteria:

  • Any patient who is already taking part in another interventional study that may influence the main criterion for judgement.
  • Any patient who is in the exclusion period determined by another study.
  • Any patient under curatorship or guardianship established by a court
  • Any patient who is pregnant, about to give birth or breastfeeding.
  • Any patient with a contra-indication or allergy to beta-lactams
  • Any patient whose survival is estimated at less than 48 hours
  • Any patient whose discharge from hospital is planned for 24 hours after admission
  • Any patient whose creatinine clearance is estimated at less than 50 ml/min or who is undergoing renal replacement therapy
  • Any patient undergoing extracorporeal life support.

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: TREATMENT
  • Allocation: NA
  • Interventional Model: SINGLE_GROUP
  • Masking: NONE

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
EXPERIMENTAL: Patients treated with high-dose ceftobiprole
High-dose ceftobiprole (500mg loading dose) will be administered to patients for 30 minutes followed by 2.5g under continuous infusion for 24 hours.

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Plasma concentration of ceftobiprole on Day 1
Time Frame: Day 1
A blood test is performed upon admission to the Intensive Care Unit, BEFORE beginning antibiotic therapy with Ceftobiprole
Day 1
Blood test after injection of loading-dose Ceftobiprole (Cmax) for 30 minutes
Time Frame: Day 1 (after the 30-minute injection)
A 3ml blood sample is taken after injection of 500g of Ceftobiprole for 30 minutes, for pharmacological dosage.
Day 1 (after the 30-minute injection)
Blood test 2 hours AFTER beginning antibiotic therapy with ceftobiprole
Time Frame: Day 1, 2 hours from start of treatment
After injection of loading-dose Ceftobiprole (Cmax) for 30 minutes followed by 2.5g by continuous infusion of ceftobiprole, a sample is taken at 2 hours from the start of treatment.
Day 1, 2 hours from start of treatment
Blood test 6 hours AFTER beginning antibiotic therapy with ceftobiprole
Time Frame: Day 1, 6 hours from start of treatment
After injection of loading-dose Ceftobiprole (Cmax) for 30 minutes followed by 2.5g by continuous infusion of ceftobiprole, a sample is taken at 6 hours from the start of treatment.
Day 1, 6 hours from start of treatment
Blood test 8 hours AFTER beginning antibiotic therapy with ceftobiprole
Time Frame: Day 1, 8 hours from start of treatment
After injection of loading-dose Ceftobiprole (Cmax) for 30 minutes followed by 2.5g by continuous infusion of ceftobiprole, a sample is taken at 8 hours from the start of treatment.
Day 1, 8 hours from start of treatment
Blood test 12 hours AFTER beginning antibiotic therapy with ceftobiprole
Time Frame: Day 1, 12 hours from start of treatment
After injection of loading-dose Ceftobiprole (Cmax) for 30 minutes followed by 2.5g by continuous infusion of ceftobiprole, a sample is taken at 12 hours from the start of treatment.
Day 1, 12 hours from start of treatment
Time 2 blood test on third day of antibiotic therapy with ceftobiprole
Time Frame: Day 3 at Time 2
Patient is on 2.5g of ceftobiprole by continuous infusion. Samples are taken at regular intervals on Day 3.
Day 3 at Time 2
Time 6 blood test on third day of antibiotic therapy with ceftobiprole
Time Frame: Day 3 at Time 6
Patient is on 2.5g of ceftobiprole by continuous infusion. Samples are taken at regular intervals on Day 3.
Day 3 at Time 6
Time 8 blood test on third day of antibiotic therapy with ceftobiprole
Time Frame: Day 3 at Time 8
Patient is on 2.5g of ceftobiprole by continuous infusion. Samples are taken at regular intervals on Day 3.
Day 3 at Time 8
Time 12 blood test on third day of antibiotic therapy with ceftobiprole
Time Frame: Day 3 at Time 12
Patient is on 2.5g of ceftobiprole by continuous infusion. Samples are taken at regular intervals on Day 3.
Day 3 at Time 12

Secondary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Pulmonary concentration of ceftobiprole on Day 3
Time Frame: On Day 3 of treatment with ceftobiprole
Pulmonary concentrations of ceftobiprole are measured by bronchoalveolar lavage at the same time as any one of the blood samples are taken on Day 3
On Day 3 of treatment with ceftobiprole
Plasma concentration BEFORE treatment
Time Frame: Day 1
A blood test is performed upon admission to the Intensive Care Unit, BEFORE beginning antibiotic therapy with Ceftobiprole to evaluate plasma concentration.
Day 1
Plasma concentration AFTER maximum dose of ceftobiprole on Day 1
Time Frame: Day 1
Patient has now begun antibiotic therapy with Ceftobiprole and has been injected with 500g of Ceftobiprole for 30 minutes. A blood sample is taken to evaluate plasma concentration.
Day 1
Plasma concentration after two hours at the steady-state
Time Frame: Day 1
The dosage of Ceftobiprole has now been reduced. Patient is on 2.5g of ceftobiprole by continuous infusion and plasma concentration is measured after 2 hours.
Day 1
Plasma concentration after 6 hours at the steady-state
Time Frame: Day 1
Patient is on 2.5g of ceftobiprole by continuous infusion and plasma concentration is measured after 6 hours.
Day 1
Plasma concentration after 8 hours at the steady-state
Time Frame: Day 1
Patient is on 2.5g of ceftobiprole by continuous infusion and plasma concentration is measured after 8 hours.
Day 1
Plasma concentration after 12 hours at the steady-state
Time Frame: Day 1
Patient is on 2.5g of ceftobiprole by continuous infusion and plasma concentration is measured after 12 hours.
Day 1
Plasma concentration at Time 2 on Day 2 of the steady-state
Time Frame: Day 2 at Time 2
Patient is on 2.5g of ceftobiprole by continuous infusion and plasma concentration is measured at Time 2
Day 2 at Time 2
Plasma concentration at Time 6 on Day 2 of the steady-state
Time Frame: Day 2 at Time 6
Patient is on 2.5g of ceftobiprole by continuous infusion and plasma concentration is measured at Time 6
Day 2 at Time 6
Plasma concentration at Time 8 on Day 2 of the steady-state
Time Frame: Day 2 at Time 8
Patient is on 2.5g of ceftobiprole by continuous infusion and plasma concentration is measured at Time 8
Day 2 at Time 8
Plasma concentration at Time 12 on Day 2 of the steady-state
Time Frame: Day 2 at Time 12
Patient is on 2.5g of ceftobiprole by continuous infusion and plasma concentration is measured at Time 12
Day 2 at Time 12
Plasma concentration on Day 3 (after end of 24H infusion with ceftobiprole)
Time Frame: Day 3 at Time 2
3ml blood samples are taken and plasma concentration is measured at regular intervals
Day 3 at Time 2
Plasma concentration on Day 3 (after end of 24H infusion with ceftobiprole)
Time Frame: Day 3 at Time 6
3ml blood samples are taken and plasma concentration is measured at regular intervals
Day 3 at Time 6
Plasma concentration on Day 3 (after end of 24H infusion with ceftobiprole)
Time Frame: Day 3 at Time 8
3ml blood samples are taken and plasma concentration is measured at regular intervals
Day 3 at Time 8
Plasma concentration on Day 3 (after end of 24H infusion with ceftobiprole)
Time Frame: Day 3 at Time 12
3ml blood samples are taken and plasma concentration is measured at regular intervals
Day 3 at Time 12
Presence or not of Ceftobiprole in the epithelial lining fluid on Day 3 (after end of 24H infusion with ceftobiprole)
Time Frame: Day 3
A sample of epithelial lining fluid is taken on Day 3 by bronchoalveolar lavage and analyzed.
Day 3
Dose regimens defined by Monte Carlo simulations
Time Frame: After day 3
Qualitative, pharmacokinetic modelisation using Pmetrics(r) software
After day 3
Test of cure on Day 3
Time Frame: Day 3

The clinician in charge of the patient evaluates the clinical response as follows :

Resolution:All signs and symptoms related to infection have disappeared Improvement: Marked or moderate reduction of the seriousness and/or number of signs and symptoms of the infection.

Failure: Insufficient decrease in signs and symptoms related to the infection. No change in patient's condition. Death, even undetermined.

Day 3
Test of cure on Day 8
Time Frame: Day 8

The clinician in charge of the patient evaluates the clinical response as follows :

Resolution:All signs and symptoms related to infection have disappeared Improvement: Marked or moderate reduction of the seriousness and/or number of signs and symptoms of the infection.

Failure: Insufficient decrease in signs and symptoms related to the infection. No change in patient's condition. Death, even undetermined.

Day 8
Test of microbiological cure on Day 3
Time Frame: Day 3
Descriptive and quantitative analysis on a cultivated sample taken via bronchoalveolar lavage on Day 3 to check for presence or not of ceftobiprole in the epithelial lining fluid.
Day 3
Duration of stay at the intensive care unit.
Time Frame: Day 28
28 days from the beginning of treatment, the number of days that the patient spent in the ICU are noted in the patient's medical file.
Day 28
Vital status
Time Frame: Day 28
28 days from the beginning of treatment, the patient's vital status is noted in the patient's medical file (dead/alive).
Day 28
Number of days alive without mechanical ventilation
Time Frame: Day 28
28 days from the beginning of treatment, the number of days that the patient has remained alive without mechanical ventilation is noted from the patient's medical file.
Day 28
Renal function on Day 1
Time Frame: Day 1
Creatinine clearance is measured in ML/min to evaluate the patient's renal function
Day 1
Renal function on Day 2
Time Frame: Day 2
Creatinine clearance is measured in ML/min to evaluate the patient's renal function
Day 2
Evaluation of renal function on Day 3
Time Frame: Day 3
Creatinine clearance is measured in ML/min to evaluate the patient's renal function
Day 3
Evaluation of renal function on Day 8
Time Frame: Day 8
Creatinine clearance is measured in ML/min to evaluate the patient's renal function
Day 8
Evaluation of liver function on Day 1
Time Frame: Day 1
The following measurements are taken in order to evaluate the patient's liver function: albumin level (in g/L) and transaminase doses (ALAT, ASAT).
Day 1
Evaluation of liver function on Day 2
Time Frame: Day 2
The following measurements are taken in order to evaluate the patient's liver function: albumin level (in g/L) and transaminase doses (ALAT, ASAT).
Day 2
Evaluation of liver function on Day 3
Time Frame: Day 3
The following measurements are taken in order to evaluate the patient's liver function: albumin level (in g/L) and transaminase doses (ALAT, ASAT).
Day 3
Evaluation of liver function on Day 8
Time Frame: Day 8
The following measurements are taken in order to evaluate the patient's liver function: albumin level (in g/L) and transaminase doses (ALAT, ASAT).
Day 8

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (ANTICIPATED)

September 1, 2021

Primary Completion (ANTICIPATED)

December 1, 2021

Study Completion (ANTICIPATED)

June 1, 2022

Study Registration Dates

First Submitted

November 19, 2019

First Submitted That Met QC Criteria

November 19, 2019

First Posted (ACTUAL)

November 21, 2019

Study Record Updates

Last Update Posted (ACTUAL)

November 23, 2020

Last Update Submitted That Met QC Criteria

November 20, 2020

Last Verified

November 1, 2020

More Information

Terms related to this study

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Pneumonia

3
Subscribe