Bone Formation Maxillary Sinus Width

April 2, 2021 updated by: International Piezosurgery Academy

Comparison of Bone Formation According to Different Maxillary Sinus Width: a Multicenter Prospective Study.

According to previous scientific evidence lining on biological concept of bone regeneration into the maxillary sinus, an observational study was set up to record possible (hypothesized) difference in bone formation between different width of the maxillary sinus itself. Therefore, a multicenter study was set up that foresaw a surgical intervention of sinus lift with lateral approach, the 6 months healing phase, the implant insertion in two sites with the implant site preparation made by a trephine bur to retrieve a bone specimen for histomorphometric examination without any additive invasively for the patient.

Study Overview

Status

Completed

Detailed Description

Material and Methods Study protocol This study was designed as a multicenter prospective study following STROBE (STrengthening the Reporting of Observational studies in Epidemiology) guidelines. All procedures were performed in strict accordance with the recommendations of the Declaration of Helsinki as revised in Fortaleza for investigations with human subjects. The study protocol had been approved by the relevant ethical committee (Comitato Etico Calabria-Sezione Area Nord n. 55/2016). Patients, after being thoroughly informed about the study protocol, the treatment, its alternatives and any potential risk, signed a written informed consent for the participation in the study and authorized the use of their data for research purposes.

Any patient with Kennedy class II partial edentulism requiring unilateral sinus floor elevation for the placement of two not adjacent dental implants supporting a fixed partial prosthesis was eligible for entering this study.

Pre-surgical phase Patients recruited in the present study underwent a careful clinical examination, including assessment of periodontal conditions (probing and periapical radiographs), evaluation of available bone volume in the edentulous areas on cone beam computed tomography and analysis of occlusal relationships (diagnostic wax-up). A surgical resin guide was manufactured by duplicating the diagnostic wax-up.

All patients received professional mechanical tooth cleaning and periodontal debridement one week prior to surgery and were prescribed with chlorhexidine digluconate 0.2% mouthwash twice a day.

Surgical procedure All patients underwent antibiotic prophylaxis (2 g single-dose amoxicillin one hour before surgery). After performing local anaesthesia (articaine 4% with epinephrine 1:100.000) and elevating a full-thickness flap, the surgical guide was placed in position and an antrostomy was created by consuming the lateral wall of the maxillary sinus with ultrasonic instrumentation in the area between the two planned implant sites. The sinus membrane was then carefully elevated and, after checking its integrity with visual inspection and Valsalva maneuver, the subantral space was filled with a composite graft in granules [50% cortico-cancellous porcine graft (Gen-Os, Tecnoss, Pianezza, Italy) - 50% synthetic nano-hydroxyapatite (Fisiograft Bone, Ghimas, Casalecchio di Reno, Italy)]. A resorbable bovine collagen membrane (Bio-Gide, Geistlich, Wolhusen, Switzerland) fixed with two pins was placed to cover the lateral antrostomy and flaps were sutured with Sentineri sutures and single stitches using synthetic monofilament. Patients were prescribed with antibiotics for 4 days (amoxicillin 1 g three times a day) and NSAID (ibuprofen 600 mg), when needed. Sutures were removed after 10 days.

After 6 months of healing, a cone beam tc scan was performed to evaluate the radiographic outcome of the regenerative procedure and to plan implant insertion. With the assistance of the surgical template, two bone-core biopsy biopsies were harvested in the planned implant sites by using 3-mm diameter trephine drills (2982.Y0.30, DenTag, Maniago, Italy) (Fig. 3-4). Dental implants were then inserted in the biopsy sites: after 5 months of submerged healing, they were restored with screwed ceramic crowns.

Radiographic measurements Radiographic measurements were taken from the three cone beam CT cross-sectional slices (step 1 mm; width 1 mm) corresponding to the position where the biopsy was retrieved. Two independent calibrated examiners (A.R. and Fe.Be.) measured residual bone height (RBH) between the alveolar ridge and the sinus floor; sinus width (SW) (distance between buccal and palatal walls at 10-mm level, comprising the residual alveolar crest. Distances were measured by using the specific tool of an imaging software (OsiriX MD, Pixmeo SARL, Bernex, Switzerland) and were expressed in millimeters. Intra-examiner reliability was assessed with Cohen's K test.

Sample processing for histological analysis Histologic and histomorphometric analyses of all specimens were performed by one of the authors (VN), blinded to the study design and to biopsy origin. Immediately after harvesting, biopsies were carefully rinsed with cold 5% glucose solution to remove blood remnants maintaining the correct osmolarity (278 milliosmole/L).

Specimens were subsequently fixed for three days in 10% buffered formalin solution at pH 7.2, and then dehydrated in an ascending series of alcohol rinses and embedded in a methacrylate resin (Technovit 7200 VLC, Kulzer, Wehrheim, Germany). After 12 days of polymerization, biopsies were cut along their longitudinal axis with a high-precision carborundum disk at 50 µm and then ground down under running water with a series of polishing discs to about 30 ± 10 µm. The slides were then mounted and stained with acid fuchsine-toluidine blue and von Kossa staining.

Histomorphometry The following variables were measured for each biopsy: total area of the biopsy (in mm2), percentage of newly-formed bone (NFB),percentage of connective tissue/marrow spaces (MS), and percentage of residual graft particles (RG). The analysis was performed using transmitted brightfield light microscope (Biostar B3; Exacta Optech, San Prospero, Italy), connected to high resolution digital camera (Moticam 5.0; Motic Microscopy, Kowloon, China). A software with image capturing capabilities (Image-Pro Plus 6.0; Media Cybernetics Inc., Bethesda, MD, U.S.A.) was used to analyze images. Software calibration was performed for each image analysis by using the "Calibration Wizard" tool, which reports the number of pixels between two selected points. Linear remapping of the pixel numbers was used to calibrate the distance in µm or in mm according to the magnification degree.

Predictor and outcome variables This prospective study tested the null hypothesis of no differences in new bone formation among areas of different width in the same sinus against the alternative hypothesis of a difference.

The primary predictor variables were sinus width (SW) and residual bone height (RBH).

Primary outcome measure:

• new bone formation (NFB) after six months of healing

Secondary outcome measures:

  • residual graft (RG): after six months of healing
  • any complications or adverse events

Sample size calculation and statistical power A statistical software (Statistica per Discipline Biomediche, Version 6.0, Mc Graw-Hill, New York, NY, U.S.A.) was used to determine the sample size of this prospective study, basing on data of a previous publication. Expected difference in NFB (as mean percentage) between narrow and wide part of the sinus was 13.8±18.25% (using sinus width=13 mm as a cut-off). A sample of 16 histological specimens for each group was required to detect significant differences between the two groups (confidence level 5% with statistical power of 80%).

Statistical analysis An independent investigator (A.R.) analyzed all datasets with statistical software (IBM SPSS Statistics for Windows, Version 25.0, IBM Corp., Armonk, NY, USA). Data normality was assessed with Shapiro-Wilk test: all datasets met the required assumptions for using parametric methods. Descriptive statistics included mean and standard deviation. The value of α was set to 0.05.

Differences in NFB between mesial and distal sites were evaluated by means of paired samples t-test. The potential influence of sinus width and RBH on NFB and RG percentage was evaluated by using Pearson correlation coefficient.

Study Type

Observational

Enrollment (Actual)

16

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

    • CS
      • Cassano allo Ionio, CS, Italy, 87011
        • Hesire
    • GO
      • Gorizia, GO, Italy, 34170
        • Studio
    • VR
      • Verona, VR, Italy, 37045
        • Studio B

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

16 years and older (Adult, Older Adult)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Sampling Method

Non-Probability Sample

Study Population

Any patient with Kennedy class II partial edentulism (Kennedy 1928) requiring unilateral sinus floor elevation for the placement of two not adjacent dental implants supporting a fixed partial prosthesis was eligible for entering this study

Description

Inclusion Criteria:

  • height of the residual bone crest <5 mm in both sites where implant placement was planned;
  • age >18 years;
  • written informed consent given.

Exclusion Criteria:

  • general contraindications to implant surgery
  • smokers
  • uncontrolled diabetes (HBA1c > 7.5%)
  • treated or under treatment with intravenous antiresorptive drugs
  • allergy to bovine collagen
  • immunosuppressed
  • irradiated in the head and neck area
  • pregnant or breastfeeding
  • substance abusers
  • psychiatric problems or unrealistic expectations
  • patient not fully able to comply with the study protocol.
  • maxillary sinus conditions contraindicating sinus floor elevation
  • poor oral hygiene and motivation (FMPS >25 and or FMBS>20)
  • Schneiderian membrane perforation during surgery

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Observational Models: Case-Control
  • Time Perspectives: Prospective

Cohorts and Interventions

Group / Cohort
Intervention / Treatment
Large sinus
same patient, sinus width > 12mm measured at 10mm from the alveolar crest at the planned implant site
sinus floor elevation with lateral approach. 6 months healing phase. implant site preparation with trephine bur and bone specimen retrieval.
narrow sinus
same patient, sinus width < 12mm measured at 10mm from the alveolar crest at the planned implant site
sinus floor elevation with lateral approach. 6 months healing phase. implant site preparation with trephine bur and bone specimen retrieval.

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
quantity (%) of newly formed bone
Time Frame: 6 months
quantity (%) of newly formed bone (NFB) in histomorphometric analysis
6 months

Secondary Outcome Measures

Outcome Measure
Measure Description
Time Frame
quantity (%) of graft
Time Frame: 6 months
quantity (%) of residual graft (RG) in histomorphometric analysis
6 months
quantity of complications
Time Frame: through study completion, an average of 1 year
quantity of any complications or adverse events
through study completion, an average of 1 year

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Investigators

  • Principal Investigator: Claudio Stacchi, Dr., Piezoelectricsurgery Academy

Publications and helpful links

The person responsible for entering information about the study voluntarily provides these publications. These may be about anything related to the study.

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

March 15, 2017

Primary Completion (Actual)

March 15, 2020

Study Completion (Actual)

March 15, 2021

Study Registration Dates

First Submitted

March 25, 2021

First Submitted That Met QC Criteria

April 2, 2021

First Posted (Actual)

April 5, 2021

Study Record Updates

Last Update Posted (Actual)

April 5, 2021

Last Update Submitted That Met QC Criteria

April 2, 2021

Last Verified

April 1, 2021

More Information

Terms related to this study

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

No

IPD Plan Description

data will be shared after data managing and statistics

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Alveolar Bone Resorption

Clinical Trials on sinus floor elevation with lateral approach

3
Subscribe