Vertical Ridge Augmentation Strategies (VARGAS)

Vertical Ridge Augmentation Strategies: An Adaptive Randomised Controlled Clinical Trial

Guided Bone Regeneration (GBR) is an invaluable and beneficial surgical technique adopted when there is the need to augment an alveolar atrophy. Strong clinical and histologic evidence exists on the effectiveness and predictability of GBR in bone augmentation of ridge deficiencies. On the other hand, it is well known that GBR remains a challenge as in the most extreme cases, it is considered a highly technique-sensitive surgical procedure.

Whilst there are numerous reviews which report the average incidence of complications in GBR, there is still insufficient evidence and manuscripts reporting a direct correlation between a specific biomaterial (membrane or scaffold) and observed complications. Only one recent systematic review and meta-analysis focused on wound healing complications following GBR for ridge augmentation procedures. Authors explored the complication rate based on the membrane type and on the timing of the first sign of soft tissue complications following bone augmentation procedures. They reported a complication rate of 17% of the overall soft tissue complications, including membrane exposure, soft tissue dehiscence, and acute infection (abscess). This estimate is consistent with that reported (12%) in a more recent systematic appraisal of the evidence on all types of complications in GBR (3). However, when horizontal augmentation procedures were reviewed, a higher rate (21%) of complications was reported within the first 18 months of a GBR procedure. This estimate was inclusive of all possible biologic complications following GBR whilst the rate of membrane exposure was of 23%.

Vertical bone augmentation represents one of the most challenging bone regenerative procedures in surgical dentistry. This is because of the inherent difficulties of the surgical procedure and the high risk of complications. The primary aim of this procedure is to recreate alveolar bone in a vertical direction (without the support of any pre-existing walls) and enable recreation of a more favourable anatomy for the restoration of the edentulous site.

Evidence on a variety of treatment options has been produced over the last 15 years including distraction osteogenesis, onlay bone grafting, and vertical ridge augmentation (VRA). Systematic reviews evaluating the efficacy of different surgical procedures for VRA either in a staged or a simultaneous fashion, reported a range of vertical bone gain of 2-8 mm. This gain was gradually lost (1.27 to 2.0mm) between 1 to 7 years post-surgery and a wide range of complications (0- 45.5%) has been reported.

The aim of this study is to assess and compare incidence of complications and percentage of vertical bone gain when using four different barrier membranes in combination with 50/50 autogenous and xenogenous bone material in VRA procedures. Secondary aims will be to evaluate and compare early and late soft tissue wound healing, gingival microvasculature and structure, patient reported outcomes and the prevalence of need for further bone augmentation and need for soft tissue grafting. Additionally, this study will also aim to assess and compare histomorphometry and histochemistry analyses of core biopsies obtained before implant placement between the four different barrier membranes.

Study Overview

• Status: Not yet recruiting
• Conditions: Complication of Surgical Procedure; Alveolar Bone Loss; Alveolar Bone Resorption; Alveolar Ridge Trauma
• Intervention / Treatment: Procedure: VRA + d-PTFE membrane; Procedure: VRA + e-PTFE membrane; Procedure: VRA + customised Ti-mesh; Procedure: VRA + RPM

Detailed Description

This is a single centre non-inferiority adaptive randomised controlled clinical trial. The primary aim of this study will be:

To assess the clinical composite outcome (incidence of complications and percentage of vertical bone gain) of vertical alveolar bone grafting procedures in patients with vertical ridge deficiencies prior to dental implant placement, using a mix of autogenous and xenogenic particulate bone materials in combination with four different barrier membranes (Titanium (Ti)-Reinforced d-Polytetrafluoroethylene (PTFE) membrane [control group], Ti-Reinforced e-PTFE Membrane, 3D printed Ti-mesh and Reinforced PTFE Mesh (RPM)).

Secondary aims are:

• To assess and compare soft tissue wound healing and vascularization using Laser Doppler Flowmetry (LDF) between tests and control.
• To assess and compare gingival microvasculature and structure in vivo using Optical Coherence Tomography (OCT) between tests and control.
• To compare prevalence of the need for further bone grafting at the time of implant placement between tests and control.
• To compare prevalence of the need of soft tissue grafting at second stage surgery between tests and controls.
• To assess and compare patient reported outcomes using the EuroQol five-dimension (EQ-5D-5L) scale and the short-form Oral Health Impact Profile (OHIP-14) between tests and control.
• To assess and compare histomorphometry and histochemistry analyses of core biopsies obtained from a sample of 5 participants from each group before implant placement between tests and control.

Patients in need of vertical ridge augmentation prior to dental implant placement will be recruited to take part in this study and will be randomised into one of the following groups receiving different interventions:

1. VRA using a 50/50 particulate bone mix (xenograft+ autograft) + Ti-Reinforced d- PTFE membrane (Positive Control)
2. VRA using a 50/50 particulate bone mix (xenograft+ autograft) + Ti-Reinforced e-PTFE membrane (Test 1).
3. VRA using a 50/50 particulate bone mix (xenograft+ autograft) + 3D printed Titanium mesh (Test 2).
4. VRA using a 50/50 particulate bone mix (xenograft+ autograft) + Reinforced PTFE mesh (Test 3)

One-hundreds and forty-eight (148) participants meeting inclusion/exclusion criteria and who consent to this study will undergo a baseline visit assessment (visit 2) in which they will have a comprehensive oral assessment, radiographic assessment of alveolar defect using Cone Beam CT and supportive periodontal therapy. After randomisation to either Tests (1-3) or Control Groups, each group will undergo a VRA procedure as randomised (visit 3). All patients will be re-examined at 1, 3, 7, 15, 30, 60 and 120 days (visits 4-10, respectively) after the surgical augmentation. At each assessment, clinical examination, soft tissue imaging measures and saliva collections will be performed. Additionally, supportive periodontal therapy will be provided to all participants at the 120 days post augmentations visit. All participants will then undergo dental Implants placement after 180 days (visit 11). Participants will then be followed at 7, 15, 30,90, 120, 180 and 365 days (visits 12-18) after dental implant placement. The 90 days post implantation visit will include supportive periodontal therapy while the 120 days visit will involve the placement of dental implant prosthetic components for all participants.

Statistical methodology and analysis:

Primary and secondary outcomes analysis:

Continuous data are displayed as mean and standard deviation whilst categorical variables will be reported as percentages and prevalence. All participants randomized to test or control will be included in final analyses. Analysis will be performed using last observation carrying forward and as intent to treat population. Secondarily, per protocol analysis will also be performed. Data will be entered in an electronic spreadsheet and checked/proofed for any errors. All data will be loaded in the appropriate software for analysis. The primary outcome assessment will be assessed by analysis of co-variance model. Age, gender, body mass index and ethnicity will be included as principal covariates. Pair-wise comparison and between groups differences will be calculated using Tukey corrections.

All secondary endpoints will be analysed in a similar fashion. Significance will be set to be at p ≤ 0.05. Adverse events analysis will also be performed between study groups at study visits. Serial changes in imaging variables will be analysed with analysis of variance for repeated measures using a conservative F-test (Greenhouse-Geisser correction). If a treatment by time interaction will be found, pair-wise comparisons will be performed (Bonferroni-Holm adjustment).

Sensitivity and other planned analyses:

In this trial, investigators will perform some types of the sensitivity analysis, including non-statistical and statistical analyses. The sensitivity analysis that investigators will be including are impact of non-compliance/protocol deviation, impact of missing data, impact of competing risk in analysis of composites outcomes, impact of baseline imbalance, and finally, related to statistical analysis is impact of different assumptions underlying statistical model. The option plan for the condition related to non-compliance/protocol deviation are intention-to-treat (ITT) analysis; as per protocol analysis; and as-treated analysis.

• Study Type: Interventional
• Enrollment (Estimated): 148
• Phase: Phase 3

Contacts and Locations

• Study Contact: Name: Francesco D'Aiuto, PhD; Phone Number: +442034561108; Email: f.daiuto@ucl.ac.uk
• Study Contact Backup: Name: Faisal Alotaibi; Phone Number: +966560007667; Email: faisal.alotaibi.20@ucl.ac.uk

Participation Criteria

Eligibility Criteria

• Ages Eligible for Study: Adult; Older Adult
• Accepts Healthy Volunteers: No

Description

Inclusion Criteria:

1. Partially edentulous with a ridge that shows at least 3mm vertical bone deficiency;
2. Females of childbearing potential and males agree to use an effective method of contraception from the time consent is signed until treatment discontinuation.
3. Females of childbearing potential have a negative pregnancy test within 7 days prior to being registered. Participants are considered not of child bearing potential if they are surgically sterile (i.e. they have undergone a hysterectomy, bilateral tubal ligation, or bilateral oophorectomy) or they are postmenopausal.
4. Willing and able to provide written informed consent.

Exclusion Criteria:

1. Comorbidities (or regular use of medications)
2. History of bone augmentation or implant placement at the area of interest
3. Females who are pregnant, planning pregnancy or breastfeeding
4. Regular use of analgesic or antibiotics within 1 month before entering the study
5. Disclosed smoking (including electronic cigarettes) or drinking over 14 alcoholic units per week
6. Active oral diseases or poor oral hygiene (defined by full mouth dental plaque scores greater than 25%)
7. Suspected or documented titanium allergy or intolerance
8. Concurrent and/or recent involvement in other research that is likely to interfere with the intervention within last 3 months of study enrolment

Study Plan

How is the study designed?

Design Details

• Primary Purpose: Treatment
• Allocation: Randomized
• Interventional Model: Parallel Assignment
• Masking: Single

Number of Arms

4

Arms and Interventions

Participant Group / Arm	Intervention / Treatment
Active Comparator: Positive Control; VRA using Ti-Reinforced d-PTFE membrane	Procedure: VRA + d-PTFE membrane; VRA using a 50/50 particulate bone mix (xenograft+ autograft) + Ti-Reinforced d-PTFE membrane
Experimental: Test 1; VRA using Ti-Reinforced e-PTFE membrane	Procedure: VRA + e-PTFE membrane; VRA using a 50/50 particulate bone mix (xenograft+ autograft) + Ti-Reinforced e-PTFE membrane
Experimental: Test 2; VRA using 3D printed Titanium mesh	Procedure: VRA + customised Ti-mesh; VRA using a 50/50 particulate bone mix (xenograft+ autograft) + 3D printed Titanium mesh
Experimental: Test 3; VRA using Reinforced PTFE mesh	Procedure: VRA + RPM; VRA using a 50/50 particulate bone mix (xenograft+ autograft) + Reinforced PTFE mesh

What is the study measuring?

Primary Outcome Measures

Outcome Measure	Measure Description	Time Frame
Incidence of complications	Measured by clinical observation/examination at each follow up visit following VRA surgery.	Baseline visit (day 0) and follow up visits (at days 1, 4(±1), 7(±1), 15(±1), 30(±3), 60(±7) and 120(±7) post surgical VRA and at days 7(±1), 15(±1), 30(±7), 90(±7), 120(±7), 180 (±14) and 365 (±14) post dental implant placement
Percentage of vertical bone gain	Measured on cone beam computed tomography (CBCT).	At baseline (before surgical VRA) and at time of dental implant(s) placement (not earlier than 180 days post surgical VRA)

Secondary Outcome Measures

Outcome Measure	Measure Description	Time Frame
Soft tissue vascularization and wound healing	Measured by Laser Doppler Flowmetry (LDF).	Baseline visit (day 0) and follow up visits (at days 1, 4(±1), 7(±1), 15(±1), 30(±3), 60(±7) and 120(±7) post surgical VRA and at days 7(±1), 15(±1), 30(±7), 90(±7), 120(±7), 180 (±14) and 365 (±14) post dental implant placement
Gingival microvasculature and structure in vivo	Measured by Optical Coherence Tomography (OCT)	Baseline visit (day 0) and follow up visits (at days 1, 4(±1), 7(±1), 15(±1), 30(±3), 60(±7) and 120(±7) post surgical VRA and at days 7(±1), 15(±1), 30(±7), 90(±7), 120(±7), 180 (±14) and 365 (±14) post dental implant placement
Need for additional bone grafting		At time of dental implant(s) placement (not earlier than 180 days post surgical VRA)
Need of soft tissue grafting		At time of dental implant(s) placement (not earlier than 180 days post surgical VRA)
Patient reported outcome measures	Using the 5-level EQ-5D (EQ-5D-5L). The EQ-5D-5L scores can range from <0 (where 0 is the value of a health state equivalent to dead; negative values representing values as worse than dead) to 1 (the value of full health), with higher scores indicating higher health utility.	Baseline visit (day 0) and follow up visits (at days 1, 4(±1), 7(±1), 15(±1), 30(±3), 60(±7) and 120(±7) post surgical VRA and at days 7(±1), 15(±1), 30(±7), 90(±7), 120(±7), 180 (±14) and 365 (±14) post dental implant placement
Patient reported outcome measures	Using the short-form Oral Health Impact Profile (OHIP-14). The OHIP-14 scores can range from 0 to 56. Higher scores indicate worse and lower scores indicate better Oral Health Related Quality of Life.	Baseline visit (day 0) and follow up visits (at days 1, 4(±1), 7(±1), 15(±1), 30(±3), 60(±7) and 120(±7) post surgical VRA and at days 7(±1), 15(±1), 30(±7), 90(±7), 120(±7), 180 (±14) and 365 (±14) post dental implant placement
Histomorphometry analysis	Using core biopsies obtained from a sample of 5 participants from each group	At time of dental implant(s) placement (not earlier than 180 days post surgical VRA)
Histochemistry analysis	Using core biopsies obtained from a sample of 5 participants from each group	At time of dental implant(s) placement (not earlier than 180 days post surgical VRA)

Collaborators and Investigators

• Sponsor: University College, London
• Investigators: Principal Investigator: Francesco D'Aiuto, University College, London

Publications and helpful links

General Publications

• Alotaibi FF, Rocchietta I, Buti J, D'Aiuto F. Comparative evidence of different surgical techniques for the management of vertical alveolar ridge defects in terms of complications and efficacy: A systematic review and network meta-analysis. J Clin Periodontol. 2023 Nov;50(11):1487-1519. doi: 10.1111/jcpe.13850. Epub 2023 Jul 26.
• Rocchietta I, Simion M, Hoffmann M, Trisciuoglio D, Benigni M, Dahlin C. Vertical Bone Augmentation with an Autogenous Block or Particles in Combination with Guided Bone Regeneration: A Clinical and Histological Preliminary Study in Humans. Clin Implant Dent Relat Res. 2016 Feb;18(1):19-29. doi: 10.1111/cid.12267. Epub 2015 Jan 27.

Study record dates

Study Major Dates

• Study Start (Estimated): February 1, 2024
• Primary Completion (Estimated): August 1, 2028
• Study Completion (Estimated): February 1, 2030

Study Registration Dates

• First Submitted: January 5, 2024
• First Submitted That Met QC Criteria: February 2, 2024
• First Posted (Estimated): February 5, 2024

Study Record Updates

• Last Update Posted (Estimated): February 5, 2024
• Last Update Submitted That Met QC Criteria: February 2, 2024
• Last Verified: February 1, 2024

More Information

Terms related to this study

• Keywords: Alveolar Bone Grafting; Vertical Ridge Augmentation; Vertical Bone Augmentation
• Additional Relevant MeSH Terms: Musculoskeletal Diseases; Stomatognathic Diseases; Periodontal Diseases; Mouth Diseases; Bone Diseases; Periodontal Atrophy; Bone Resorption; Alveolar Bone Loss
• Other Study ID Numbers: IRAS ID 297914 (Other Identifier: Integrated Research Application System); EDGE ID 144889 (Other Identifier: UCLH and UCL's study and trial management system)

Plan for Individual participant data (IPD)

• Plan to Share Individual Participant Data (IPD)?: NO
• IPD Plan Description: Could be available upon reasonable request

Drug and device information, study documents

• Studies a U.S. FDA-regulated drug product: No
• Studies a U.S. FDA-regulated device product: Yes
• product manufactured in and exported from the U.S.: Yes