- ICH GCP
- US Clinical Trials Registry
- Clinical Trial NCT01533571
Immediate Implant Placement in the Esthetic Zone
Immediate Implant Placement After Tooth Extraction in the Esthetic Zone: Extraction Socket Morphology-Guided Treatment Modalities and Esthetic Outcome
This study aims to examine dimensional alveolar ridge alterations and prevent buccal plate resorption and soft tissue recession following immediate implant placement in extraction sockets in the maxillary esthetic zone using different socket morphology-guided treatment modalities.
Expected results of the study are:
- To have found the optimal materials and GBR procedures modalities for buccal plate resorption degree reduction;
- Soft tissue recession and best esthetic result achievement. There will be possibilities to study socket morphology influence on final esthetic result achievement.
Study Overview
Status
Intervention / Treatment
Detailed Description
Aim of the study: to examine dimensional alveolar ridge alterations and prevent buccal plate resorption and soft tissue recession following immediate implant placement in extraction sockets in the maxillary esthetic zone using different socket morphology-guided treatment modalities.
Objectives:
- To evaluate extraction socket buccal plate resorption rate among patients groups with immediate implant placement simultaneously with guided bone regeneration (GBR) methods using different types of bone graft materials.
- To evaluate esthetic outcome using Complex Esthetic Index (CEI) (Appendix 3) and correlate this to the initial buccal plate thickness and soft tissue biotype assessed during immediate implant placement simultaneously with GBR.
- To recommend the most appropriate method for prevention of buccal plate resorption, soft tissue recession and esthetic result achievement following immediate implant placement in extraction sockets in the maxillary esthetic zone.
Methods
Patients sampling:
- Selection of patients with sufficient extraction sockets for immediate dental implant installation with guided bone regeneration (GBR) procedure.
- Assessment of the extraction socket should be done using classification of extraction socket based upon soft and hard tissue components before the treatment (Appendix 2).
Result analysis
Size of the research:
Sixty patients referred to an oral implantologist in Kaunas, Vilnius, Granada, Ankara cities that need immediate implants in the esthetic zone. There will be 2 groups of patients:
- Group I patients (n = 30) treated with immediate implant and GBR using xenogenic bone graft material;
- Group II patients (n = 30) treated with immediate implant and GBR using allogenic bone graft material.
Expected result:
After the study, we hope to have found the optimal materials and GBR procedures modalities for buccal plate resorption degree reduction, soft tissue recession and best esthetic result achievement. There will be possibilities to study socket morphology influence on final esthetic result achievement.
Funds:
Private sponsorship, companies sponsorship (Straumann and Botiss Dental). Detailed Protocol
After patient selection there will be few steps in present study (you can press Ctrl-Enter and go directly to the selected step):
Step 1. Clinical examination and documentation Conventional clinical examination will be done. Orthopantomograph and standardized periapical radiograph will be registered for every patient. Informed consent should be signed. Additionally an acrylic stent will be fabricated for each subject. This stent will be fixed on the incisal edges of the adjacent teeth taking into consideration planned acrylic temporary tooth space. The stent will provide three buccal/lingual pairs of consistent measurement points for each implant site located 4, 7, and 10 mm from the summit of the alveolar soft tissue. One aperture 1 will be above soft tissue margin. We should insert into aperture 1 cylinder with constant length until it contact most prominent implant transfer part. Then assistant should add acrylic or composite resin into aperture and fix cylinder strongly into template by this way. Thus we will have constant distance from point 1 to the implant collar (5 or 6mm according to the need).
Step 2. Tooth extraction Following local anesthesia, the teeth should be gently extracted, using 15c blades, periotomes, elevators and forceps, minimizing any fractures of the socket walls. Sites are thoroughly degranulated for proper visualization and clinical assessment of the socket morphology.
Step 3. Socket assessments and classification Below is an overview of extraction socket classification (Appendix 2 and Figure 1). As stated before, this classification is derived from present soft and hard tissue variables.
- Soft tissue contour variations;
- Vertical soft tissue deficiency;
- The keratinized gingival (KG) width on the mid-buccal side of the socket;
- Mesial and distal papillae appearance
- Gingival tissue biotype;
- Soft tissue quality;
- The height of alveolar process;
- Available bone beyond the apex of extraction socket;
- Extraction socket labial plate vertical position;
- Extraction socket facial bone thickness;
- Presence of extraction socket bone lesions;
- Intra-dental bone peak height (interproximal bone height);
- The mesio-distal (M-D) distance between adjacent;
- Palatal angulation.
All linear measurements will be performed to the closest 1 mm with the use of a periodontal probe. All measurements will be done by two surgeons and mean will be calculated.
Step 4. Dental implant placement. All implants should be placed in the optimal three dimensional position. Dental implant should be placed in the cingulum position (in line with adjacent teeth) and planned implant tooth incisal edge position should be in line with adjacent teeth incisal edge. In this ideal position, the implant collar should be 2 mm below the cementoenamel junction of the adjacent teeth apicocoronally or 3-4 mm bellow planned soft tissue margin, and at least 1.5 mm away from adjacent teeth mesiodistally.
After placement of optimal dental implant the remaining gap between the implant and the surrounding bony walls should be at least 2 mm or should be need for GBR of buccal plate outside the socket.
Step 5. Implant position and alveolar bone assessment:
- Bone in front to the implant width;
- Bucco-lingual ridge width;
- Vertical residual gap;
- Implant apico-coronal position. Step 6. The remaining defects augmentation based on the proposed scheme. Flapless surgery will be applied consequently GBR application place will be inside the socket. The remaining defects and dehiscences after implant placement will be filled up, using two types of bone graft materials: Group I - natural bovine bone grafting material + resorbable natural soft tissue membrane and Group II - processed human allograft + resorbable natural soft tissue membrane. In future we will call Group II control group. Resorbable membrane should be condensed on bone graft without pressure and fixed by provisional crown. Conventional medicament treatment including Chlorhexidine 0.2% oral rinses twice daily for 2 weeks will be applied.
Step 7. The provisional crown fixation. Individualized provisional acrylic crown will be fabricated before operation and will be adapted and fixed on temporary abutment after implant insertion if there is initial implant stability under 35 Ncm insertion torque. The provisional crown will be cemented with temporary cement. If the implant fails to achieve initial stability under 35 Ncm insertion torque, the provisional acrylic crown would be bonded to the neighboring teeth. In all cases, the provisional crowns are excluded from occlusion. After 6 months, the provisional restorations will be replaced by a permanent cemented or screw-retained zirconia crown.
Step 8. Final prosthetic treatment After 6 months, the provisional restorations will be replaced by a permanent cemented zirconia crown fixed on zirconia abutment. Patients follow up: Patients will be rechecked two times: 6 months and 1 year after implant treatment.
Step 10. Complex Esthetic Index (CEI) for anterior maxillary implant supported restorations This complex esthetic index is composed of three components: the soft tissue index (S), predictive index (P) and implant supported restoration index (R) (Appendix 1).
Appendix 1. Clinical documentation sequence:
- Preoperative picture of mouth area of patient, including smile line
- Clinical preoperative picture of defect area (approximately 4 teeth in picture)
- Preoperative orthopantomography and periapical X-ray
- Extraction of the tooth
- Socket measurements with caliper and probe
- Operation area ready for implantation
- Implant placement
- Bone substitute application
- Resorbable membrane application
- Clinical situation right after surgery with the provisional crown
- Clinical situation postoperative 1 week (if available)
- Clinical situation postoperative 6 months without provisional crown (incisal edges and frontal view projections)
- Clinical situation postoperative 6 months with permanent crown (incisal edges and frontal view projections)
- Follow-up after 6 months periapical X-ray
- Alveolar process measurements with caliper and probe
- Clinical situation postoperative 1 year after treatment (incisal edges and frontal view projections)
- Follow-up after 1 year periapical X-ray
- Alveolar process measurements with caliper and probe
Appendix 2. Extraction socket soft and hard tissue assessments and socket types questionnaire Observer:_________________ Assessment series No □
Date:
Cause for tooth loss:
Patients name and family name:
Gender: Male □ Female □
Tooth No: 15 14 13 12 11 21 22 23 24 25
Soft and hard tissues assessment
Extraction socket types: Adequate Compromised Deficient
Soft tissue Quantity
Soft tissue contour variations No □ <2 mm □ ≥2 mm □
Soft tissue vertical deficiency (probe) No □ 1 to 2 mm □ >2 mm □
Keratinized gingival width (probe) >2 mm □ 1 to 2 mm □ <1 mm □
Mesial and distal papillae appearance (Nordland & Tarnow) I □ II □ III □
Soft tissue color, consistency, and contour Pink, firm and smooth □ Slightly red, soft sponge and uneven contour □ Red/Bluish, red, soft oedematous and boggy or craterlike soft tissue appearance □
Biotype of gingival tissue (probe) Thick □ Moderate □ Thin □ 2.0 mm □ ≥1.0 to <2.0 mm □ <1.0 mm □
Hard tissue Height of alveolar process (orthopantomograph) >10 mm □ >8 to ≤10 mm □ ≤8 mm □
Available bone beyond the apex of extraction socket (orthopantomograph) ≥4 mm □ ≥3 to <4 mm □ <3 mm □
Extraction socket labial plate vertical position; (probe) ≤3 mm □ >3 to <7 mm □ ≥7 mm □
Extraction socket facial bone thickness (caliper) ≥2 mm □ ≥1 to <2 mm □ <1 mm □
Presence of socket bone lesions No □ Yes □ Yes □
Mesial and distal intra-dental bone peak height (periapical X-ray) 3 to 4 mm □ ≥1 to <3 mm □ <1 mm □
Mesio-distal distance between adjacent teeth (probe) ≥7 mm □ >5 to <7 mm □ ≤5 mm □
The need for palatal angulation (diagnostic wax-up) <5° □ 5-30° □ >30° □
Extraction socket type:
Appendix 3. Complex Esthetic Index (CEI) questionnaire Observer:_________________ Assessment series No □
Date:
Patients name and family name:
Index and parameters Rating and evaluation grades of parameters variations Adequate 20% Compromised 10% Deficient 0%
S index
- Soft tissue contour variations (probe) No □ <2mm □ ≥2mm □
- Soft tissue vertical deficiency (probe) No □ 1 to 2 mm □ >2 mm □
- Soft tissue color and texture variations No □ Moderate □ Obvious □
- Mesial papillae appearance Complete fill □ Partial fill □ None □
- Distal papillae appearance Complete fill □ Partial fill □ None □
S index general rating and evaluation grade 100% 60-90% <50%
P index
- Mesial interproximal bone height (periapical X-ray) <5 mm □ 5 to 7 mm □ >7 mm □
- Distal interproximal bone height (periapical X-ray) <5 mm □ 5 to 7 mm □ >7 mm □
- Gingival tissue biotype (probe) >2 mm □ 1 to 2 mm □ <1 mm □ 4
Implant apico-coronal position (probe) 1.5 to 3 mm □ >3 to5 mm □ >5 mm □ 5
Horizontal contour deficiency (probe) No □ 1 to 3 mm □ >3 mm □
P index general rating and evaluation grade 100% 60-90% <50%
R index
- Color and translucency No □ Moderate □ Obvious □
- Labial convexity in the abutment/implant junction No □ <1 mm □ <2 mm □
- Implant/crown incisal edge position No □ ±1mm □ ±2 mm □
- Crown width/length ratio <0.85 □ 0.85 to 1.0 □ >1.0 □
- Surface roughness and ridges No □ Moderate □ Obvious □
R index general rating and evaluation grade 100% 60-90% <50%
Gender: Male □ Female □
Tooth No: 15 14 13 12 11 21 22 23 24 25
Complex Esthetic Index: S¬____% P____% R____%.
Study Type
Enrollment (Anticipated)
Phase
- Not Applicable
Contacts and Locations
Study Locations
-
-
-
Kaunas, Lithuania
- Lithuanian University of Health Sciences
-
-
-
-
-
Granada, Spain
- University of Granada
-
-
-
-
-
Ankara, Turkey
- Hacettepe University
-
-
-
-
Michigan
-
Ann Arbor, Michigan, United States, 48109
- University of Michigan
-
-
Participation Criteria
Eligibility Criteria
Ages Eligible for Study
Accepts Healthy Volunteers
Genders Eligible for Study
Description
Inclusion Criteria:
- General health satisfactory
- Single-tooth replacement in the maxillary anterior segments
- Extraction socket Type I and Type II (Juodzbalys et al.)
- Non-adjacent implant sites and prosthetic restorations
- Patient will not wear any kind of removable prosthesis over the treatment area;
- Availability of complete clinical records.
Exclusion Criteria:
- Uncontrolled diabetes
- Immunodeficiency diseases
- Heavy smokers (more than 10 cigarettes a day)
- Untreated periodontal disease.
Study Plan
How is the study designed?
Design Details
- Primary Purpose: Treatment
- Allocation: Non-Randomized
- Interventional Model: Parallel Assignment
- Masking: Double
Arms and Interventions
Participant Group / Arm |
Intervention / Treatment |
---|---|
Active Comparator: Immediate implant + xenogenic graft
Treatment with immediate implant and GBR using xenogenic bone graft material
|
Crown can be fixed on abutment if there is initial stability under 35 Ncm insertion torque. If insertion torque will be less, crown should be bond to neighboring teeth using composite material.
Other Names:
|
Active Comparator: Immediate implant + allogenic graft
Treatment with immediate implant and GBR using allogenic bone graft material.
|
Crown can be fixed on abutment if there is initial stability under 35 Ncm insertion torque. If insertion torque will be less, crown should be bond to neighboring teeth using composite material.
Other Names:
|
What is the study measuring?
Primary Outcome Measures
Outcome Measure |
Measure Description |
Time Frame |
---|---|---|
Complex Esthetic Index (CEI)
Time Frame: One year
|
CEI will be evaluated by two calibrated observers and mean will be calculated.
Complex esthetic index is composed of three components: the soft tissue index (S), predictive index (P) and implant supported restoration index (R).
|
One year
|
Collaborators and Investigators
Investigators
- Study Chair: Gintaras Juodzbalys, Professor, Lithuanian University of Health Sciences (Lithuania)
- Study Chair: Hom-Lay Wang, Professor, University of Michigan
- Principal Investigator: Pablo Galindo-Moreno, Professor, University of Granada (Spain)
- Principal Investigator: Tolga F Tozum, Professor, Hacettepe University (Turkey)
- Principal Investigator: Povilas Daugela, Dr., Lithuanian University of Health Sciences (Lithuania)
- Principal Investigator: Algirdas Puisys, Dr., Lithuanian University of Health Sciences (Lithuania)
Publications and helpful links
General Publications
- Juodzbalys G, Wang HL. Socket morphology-based treatment for implant esthetics: a pilot study. Int J Oral Maxillofac Implants. 2010 Sep-Oct;25(5):970-8.
- Juodzbalys G, Wang HL. Esthetic index for anterior maxillary implant-supported restorations. J Periodontol. 2010 Jan;81(1):34-42. doi: 10.1902/jop.2009.090385.
- Juodzbalys G, Sakavicius D, Wang HL. Classification of extraction sockets based upon soft and hard tissue components. J Periodontol. 2008 Mar;79(3):413-24. doi: 10.1902/jop.2008.070397.
- Juodzbalys G, Bojarskas S, Kubilius R, Wang HL. Using the support immersion endoscope for socket assessment. J Periodontol. 2008 Jan;79(1):64-71. doi: 10.1902/jop.2008.070253.
- Juodzbalys G, Wang HL. Soft and hard tissue assessment of immediate implant placement: a case series. Clin Oral Implants Res. 2007 Apr;18(2):237-43. doi: 10.1111/j.1600-0501.2006.01312.x.
- Nordland WP, Tarnow DP. A classification system for loss of papillary height. J Periodontol. 1998 Oct;69(10):1124-6. doi: 10.1902/jop.1998.69.10.1124.
Helpful Links
Study record dates
Study Major Dates
Study Start
Primary Completion (Anticipated)
Study Completion (Anticipated)
Study Registration Dates
First Submitted
First Submitted That Met QC Criteria
First Posted (Estimate)
Study Record Updates
Last Update Posted (Estimate)
Last Update Submitted That Met QC Criteria
Last Verified
More Information
Terms related to this study
Additional Relevant MeSH Terms
Other Study ID Numbers
- Juodzbalys
Drug and device information, study documents
Studies a U.S. FDA-regulated drug product
Studies a U.S. FDA-regulated device product
product manufactured in and exported from the U.S.
This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.
Clinical Trials on Unspecified Atrophy of Edentulous Alveolar Ridge
-
Mashhad University of Medical SciencesCompletedAtrophy of Edentulous Alveolar Ridge | Alveolar Ridge AugmentationIran, Islamic Republic of
-
Studio Odontoiatrico Associato Dr. P. Cicchese...RecruitingEdentulous Alveolar Ridge Atrophy | Edentulous; Alveolar Process, AtrophyItaly
-
University of IowaOsteogenics BiomedicalCompletedAtrophy of Edentulous Alveolar RidgeUnited States
-
ahmed mohammed khalil aldahoukUnknownAtrophy of Edentulous Maxillary Alveolar RidgeEgypt
-
National Taiwan University HospitalUnknownAtrophy of Edentulous Alveolar RidgeTaiwan
-
Ain Shams UniversityCompletedHorizontal Atrophy of Edentulous Alveolar RidgeEgypt
-
International Piezosurgery AcademyUniversity of TristeCompletedAtrophy of Edentulous Maxillary Alveolar RidgeItaly
-
Sara ZayedActive, not recruitingAtrophy of Edentulous Mandibular Alveolar RidgeEgypt
-
Cairo UniversityRecruitingHorizontal Atrophy of Edentulous Alveolar RidgeEgypt
-
Harvard Medical School (HMS and HSDM)CompletedPartial Edentulism | Atrophy of Edentulous Alveolar RidgeUnited States
Clinical Trials on Immediate implant placement with simultaneous bone grafting
-
Cairo UniversityCompletedImmediate Implants | Esthetic Zone | Labial Bone Dimensional Changes | Without Labial Bone Grafting | With Labial Grafting | Thin Labial Plate of Bone Pre-extractionEgypt
-
Misr International UniversityNot yet recruiting
-
Cairo UniversityActive, not recruitingImmediate Dental ImplantsEgypt
-
Cairo UniversityUnknown
-
Kafrelsheikh UniversityCompletedRidge Augmentation With Simultaneous Implant Placement Using Bone Blocks With Autogenous Tooth GraftImplant | Ridge Augmentation | Autogenous Tooth GraftEgypt
-
University of BariCompletedIsolated Premolar Edentulous Site
-
Università Vita-Salute San RaffaeleCompleted
-
Cairo UniversityRecruiting
-
Dalia Rasheed IssaCompletedImmediate Implant Placement | Autogenous Tooth Bone Graft | L-PRFEgypt
-
Cairo UniversityCompletedImplant or Graft; RejectionEgypt